Citroen Dispatch Recalls
Safety recalls covering the Citroen Dispatch in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 69 safety recalls covering the Citroen Dispatch, the most recent dated 13 March 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Citroen Dispatch recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Mar 2026 | Water pump pulleyFault: On affected vehicles due to a production nonconformity the water pump may malfunction which may cause a loss of engine power and result in the engine shutting down. Fix: Replace the water pump. | 403 |
| Jan 2026 | Citroen cross carline fuel injection common rail.Fault: On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak. Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes. | 471 |
| Dec 2025 | Citroen spacetourer (K0) Berlingo (K9) ivi software via ota update.Fault: Affected vehicle may face a black screen on the Instrument Panel Cluster with several functions not available to view. Fix: Update the In-Vehicle-Infotainment software via Over-the-Air. | Not stated |
| Nov 2025 | Citroen Dispatch/spacetourer low in-use performance ratio ecm s/w.Fault: On affected vehicles there is an issue with the Engine Control Module (ECM) calibration which may lead to non-compliance with regulatory emission requirements. Fix: Update the ECM calibration. | 2,243 |
| Sep 2025 | Citroën spacetourer/Dispatch(K0) rear brake discsFault: Affected vehicles may have been equipped with rear brake discs out of specification. These brake discs have insufficient contact with the wheel hub resulting in abnormal stress concentration. Fix: Check the rear brake discs and replace them and the brake pads if necessary. | 1 |
| Aug 2025 | Emission recall - on board diagnosticsFault: Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations. Fix: Update the Engine Control Unit software to ensure compliance to regulations. | 4,451 |
| Aug 2025 | Citroen Dispatch (K0) lower control arm bushingFault: On affected vehicles the bolts on the front wishbone may break due to corrosion. Fix: Replace the bolts and bushings on both sides of the front wishbone. | 10,114 |
| Mar 2025 | Traction battery softwareFault: Affected vehicles may face an error in the Battery Monitoring Unit software. Fix: Update the Battery Monitoring Unit software. | 56 |
| Nov 2024 | Citroen spacetourer Dispatch k0 SEAT fixationFault: On affected vehicles there may be insufficient fixing on the 1st and/or 2nd row of seats that could potentially allow seat movement in the event of a collision Fix: On the affected vehicles seat fixings will be reworked | 859 |
| Oct 2024 | Citroen Dispatch (K0) display screws missing.Fault: On affected vehicles the radio display fixing screws may be missing allowing a potential detachment of the display during a collision. Fix: On the affected vehicles the fixings will be checked and fitted if necessary. | 2,830 |
| Aug 2024 | Citroen Dispatch (K0) rear springsFault: Affected vehicles may have been equipped with the incorrect rear springs which can result in impaired driving behaviour when fully loaded or a risk of rear spring detachment in a worst-case scenario when empty. Fix: Replace both rear springs. | 779 |
| May 2024 | Citroen Dispatch - k0 - ground connectionsFault: On affected vehicles there could be a loss of ground connections for some electrical harnesses which could result in a worst-case scenario in the loss of several vehicle functions with safety impacts and a risk of erratic behaviour of the vehicle. Fix: Check and re-tighten the ground connections. | 6 |
| Dec 2022 | Some vehicles may have been equipped with an incorrectly positioned fuel pipe.Fault: Some vehicles may have been equipped with an incorrectly positioned fuel pipe. Fix: Check fuel pipe positioning correct if necessary and fit protective sleeve. | 1,507 |
| Aug 2022 | The efficiency of the handbrake and service brake may be compromised.Fault: On the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised Fix: Check the rear brake caliper references and replace as necessary | 27 |
| Jul 2022 | The high voltage harness fitted might not be to correct specificationFault: The High Voltage Harness might not be to the correct specification. Fix: Check the harness conformity and replace it if necessary. | 11 |
| May 2022 | Headrests on the front modular SEAT do not conform to the design specificationFault: Affected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification. Fix: Check the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced. | 359 |
| Jan 2022 | Electrical harness could move from original position and weaken the harnessFault: The rear window electrical harness could become displaced from its original position and present a potential thermal issue. Fix: Check the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position. | 1 |
| Jan 2021 | Vehicles affected may have a single wheel bolt on both right hand side wheels which may not have been tightened correctlyFault: A single wheel bolt on both Right-hand wheels may not be tightened to the correct tightening torque. Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred. | 7 |
| Jan 2021 | Vehicles affected may have a single wheel bolt on both left hand side wheels which may not have been tightened correctlyFault: A single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque. Fix: Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred. | 12 |
| Mar 2020 | Fuel tubes under body may become damaged over timeFault: The fuel pipes under the body may have been damaged over time due to a relative movement between these pipes and their surroundings Fix: Check the condition of the fuel pipes and replacing them if necessary. New protection will be fitted on all vehicles to prevent this damage in the future. | 21,087 |
| Mar 2020 | Possible non conformity of seals in front wheel arches could lead to water ingress into certain electronic unitsFault: Possible non-conformity of certain seals in the front wheel arches could lead to water ingress into the passenger compartment. Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required | 84 |
| Mar 2020 | The tightening of the rear suspension fixings may not be to specificationFault: The tightening of some rear suspension fixings may not be correct to specification Fix: Correcting some tightening torques and replacing some nuts and bolts. | 4 |
| Mar 2020 | Non-conformity of the rear brake callipersFault: A non-conformity of the rear brake callipers could reduce the efficiency of the parking brake Fix: Check and if necessary replace the callipers. | 84 |
| Mar 2020 | One or more fixations of the seatbelts and one ground cable may not be tightened correctlyFault: The tightening of the seat belt fixings and of certain earth cables may not conform to specification. Fix: Tightening of the seat belt fixings and of certain earth cables | 85 |
| Mar 2020 | One or more fixations of the seatbelts lower bolts may not be tightened correctlyFault: The tightening and positioning of the seat belt lower bolts may be incorrect. Fix: This campaign consists of checking and if necessary correcting both the position of the bolt and the tightening torque of all of the lower fixings of the seat belts. | 3,111 |
| Feb 2020 | Certain seals in the front wheel arches may not be correct to specificationFault: Certain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment Fix: Resealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required. | 15 |
| Sep 2019 | On the affected vehicles it is possible that a crack could develop over time on the counterweight supports located under the rear floorFault: Counterweight could become detached and fall from the vehicle Fix: Add two new fixings for each counterweight | 792 |
| Aug 2019 | If the front centre passenger seating position is occupied the front outer passenger SEAT belt could releaseFault: There is a risk of inadvertent release to the front outer passenger seat belt. Fix: Modifying the central seat buckle with foam and heat-shrinkable protective tubing. | 16,122 |
| May 2019 | Front suspension may not be to correct specificationFault: Possible slackening of the front wishbone ball joint. Fix: Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced. | 22,046 |
| Feb 2019 | The fixing bolt of the front suspension wishbone may not be correct to specificationFault: The fixing bolt of the front Suspension wishbone may not be correct to specification. Fix: Replace the fixing bolts and nuts of the front suspension wishbones. | 47 |
| Feb 2019 | Rear suspension wishbone mounting bolts nay not be correct to specificationFault: The rear suspension wishbone mountings bolts may not be correct to specification. Fix: Replacement of the rear suspension wishbone bolts. | 313 |
| Feb 2019 | The steering rack assembly may not be correct to specificationFault: The steering rack assembly may not be correct to specification. Fix: Replace the steering rack assembly and the fixings. | 10 |
| Feb 2019 | Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball jointsFault: Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints. Fix: Increasing the tightening torque of the ball joint and adding thread lock to the ball joint threads if the ball joint threads are found to be rusty the ball joint will be replaced. | 2,633 |
| Feb 2019 | Under certain driving conditions the air conditioning compressor pulley could breakFault: The air conditioning compressor pulley could break and damage other components. Fix: Replace the air conditioning compressor pulley and if necessary the protective cover. | 2,310 |
| Jul 2018 | Tow ball support bracket durability inadequateFault: The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime. Fix: The manufacturer�s remedy involves the replacement of the tow ball support bracket with a redesigned version. | 103 |
| Jul 2018 | Cooling system strategy could overheat the engine.Fault: The cooling system strategy and the maximum temperature alert could cause the engine to overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert. Fix: The remedy involves downloading new engine management software. | 660 |
| Jul 2018 | Engine oil gallery sealing plug incorrectly tightenedFault: On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road. Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque. | 37 |
| Jan 2018 | Engine component may not be to specificationFault: An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds. Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine. | 198 |
| Sep 2017 | Starter motor supply wiring harness may become damagedFault: The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit. Fix: On affected vehicles check the positioning of the terminal and correct it if necessary. | 12 |
| Apr 2017 | Starter motor may not operate correctlyFault: A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire. Fix: On affected vehicles check and where necessary replace the starter motor relay. | 3,607 |
| Feb 2017 | Unexpected airbag deploymentFault: On the affected vehicles a possible nonconformity of certain seals on the vehicle�s body could lead to water ingress in the passenger compartment. This may affect the operation of the passenger air bag. Unintended deployment is possible. Fix: On affected vehicles add extra sealant and replace wet or water damaged components. | 1,653 |
| Feb 2017 | Brake servo may be insecureFault: The tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo Fix: Check servo security and where necessary replace the brake servo unit | 2 |
| Feb 2017 | Fuel may leakFault: On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck seal near the filler cap could cause a fuel leak when completely filling up the tank. Fix: Checking and if necessary refit seal. | 54 |
| Feb 2017 | Front shock absorber may failFault: The bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle. Fix: On affected vehicles replace the front shock absorber retaining bolts. | 1 |
| Feb 2017 | Malfunctions in electrical systemsFault: It has been identified that some ground connections of the cabin wiring harness and the fixings of the airbag control unit may not be to specification. This issue or non-compliance could cause erratic malfunctions of certain electrical equipment even in very rare cases causing the engine to cut-off or airbags malfunction. Fix: Recall all affected vehicles to check tightness of the ground connections and airbag control unit fixings. If required these will need rectification. | 8 |
| Feb 2017 | Unexpected airbag deploymentFault: It has been identified that due to a possible non-conformity of certain seals on the vehicle�s body there is the possibility that water can enter the passenger compartment of the vehicle. The occupants should experience either wet carpets and or a possible damp smell. However the ingress of water into the cabin could affect the electrical operation of the airbag module which could lead to an unexpected deployment of the airbag. Fix: Recall all affected vehicles to add additional sealant to the body interfaces and if required to replace any interior components damaged by the water ingress. | 141 |
| Feb 2017 | Steering bolts may not be tightened correctlyFault: Incorrect assembly of the steering rack which could cause the loss of the mechanical link between the steering pinion valve and the steering rack during parking manoeuvres at full lock. Fix: Check affected vehicles and where necessary replace the steering rack. | 2 |
| Dec 2015 | Fuel may leakFault: The fuel filter's integrated heater may be defective and could cause the cover to distort. This could cause air ingress and fuel egress. Either could cause poor starting and a warning light should illuminate Fix: On affected vehicles replace fuel heater cover. Check and if necessary replace connector. | 9,483 |
| Dec 2014 | Fuel may leakFault: On affected vehicles; Under certain conditions the fuel leak off pipe may become insecure at the connection to the injector. If this happens fuel may leak form the connection. Fuel may accumulate in the engine compartment and vehicle users will be aware of a smell of fuel. Fix: Inspect connection on affected vehicles and where necessary replace the fuel leak off return pipe fixing with new adhesive. | 4,775 |
| Jan 2014 | Wiper motor may failFault: An internal fault with the wiper motor could cause it to stop working. In some rare cases the windscreen wipers may stop working while in operation. Fix: Recall affected vehicles and check the manufacturing date of the wiper motor and add a supplementary earth wiring harness if necessary. | 620 |
| Jan 2014 | Braking efficiency may be affectedFault: On certain vehicles the front brake discs may not be the required thickness for the vehicle definition. This concern may result in reduced braking efficiency. Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the front brake discs. | 49 |
| Sep 2013 | Loss of steeringFault: The steering column to steering wheel shaft may not have been assembled correctly. If not corrected noise and play will become apparent and if these warnings are not acted on eventually steering control could be lost. Fix: Recall the vehicles that are likely to be affected to check and where necessary refit the steering column correctly to the steering wheel shaft. | 37 |
| Mar 2012 | Tyre may deflateFault: Some tyres may have suffered superficial damage when the vehicle was being transported. The front Left hand tyre may have localised damage on the tread or the inner side. The tyre may rip and deflate. Fix: Carry out a visual check of the condition of the tyre in the affected areas and replace the tyre if necessary. | 17 |
| Aug 2011 | Fire may occurFault: It has been identified that the engine cylinder head may not comply with manufacturing specification this may lead to an oil leak which if not rectified could result in fire if the oil contacts hot engine components. Fix: Recall the affected vehicle check the cylinder head and replace if required. | 2 |
| Jul 2011 | Power steering assistance may failFault: It is possible that the wiring harness for the power assisted steering motor may come in contact with other components in the engine bay. Should this occur then it is possible that the power steering assistance on this large vehicle may become affected. Fix: Recall affected vehicles and fit protection to the wiring harness. | 1,357 |
| Feb 2011 | Fuel may leakFault: It is possible that the fuel return pipe may chaff on the diesel fuel filter support in the engine compartment. This can if not identified result in a fuel leak. Fix: Recall all affected vehicles for the addition of a protective sleeve to the return pipe. | 33 |
| Dec 2010 | Braking assistance may not perform correctlyFault: In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance. Fix: Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve. | 20,089 |
| Oct 2010 | Lights may fail without warningFault: It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning. Fix: Recalled vehicles will have the lighting management software updated. | 12,950 |
| Aug 2010 | Braking efficiency may be compromisedFault: The threaded portion of the brake linkage rod in the brake control system may not be to conformity. This could result in a reduction of braking efficiency. Fix: Recall affected vehicles to check rod and replace if found not to meet conformity. | 630 |
| Mar 2010 | Braking performance may be affectedFault: It has been identified that water may ingress the brake drums causing premature brake lining wear. Should this occur the brake effort produced by the rear wheels may be reduced. Fix: Recalled vehicles will have a seal fitted to the handbrake cable and the subject brake linings replaced. | 2,258 |
| Feb 2010 | Fuel may leakFault: It has been identified that the possibility exists that contact between the fuel return pipe and the engine shield may take place inside the engine compartment. Should this occur wear on the pipe would ensue which in the worst case; would result in a fuel leak. Fix: Recalled vehicles will be fitted with an additional fastener to ensure that contact is not made and if necessary the fuel return pipe will be replaced. | 1,135 |
| Oct 2009 | Lights may switch off unexpectedlyFault: It has been identified that due to incorrect positioning of the exterior lighting control ring by the lighting management system the lights may switch off unexpectedly. Fix: Recalled vehicles will have the lighting management software updated | 37,086 |
| Jan 2009 | Accelerator pedal may fail to return to idle when releasedFault: It has been identified that on affected vehicles a non conformity within the accelerator pedal assembly may cause interference and prevent the pedal from returning to its original position. This may result in the vehicle maintaining a degree of acceleration which can be overcome by firm braking. Fix: Recalled vehicles will have the accelerator pedal changed. | 178 |
| Nov 2007 | Possible loss of power steeringFault: It has been identified that poor protection of the power steering pump earth terminal; could result in loss of power assistance to the steering. Fix: Recalled vehicles will have the power steering pump earth terminal protection reinforced. | 689 |
| May 2006 | Seatbelt may not operate as designedFault: The seat belt locking action may not be as fast as it is designed to be. Fix: Recall the vehicles that may be affecte check the date of manufacture of the seat belts and where necessary replace the seat belts. | 39 |
| Jul 2003 | Possible failure of the bottom engine mounting tie barFault: An inadequate weld on the bottom engine mounting tie bar may fail and cause a serious engine vibration and separation of one of the driveshafts. Fix: Fit a replacement bottom engine mounting tie bar. | 266 |
| Feb 2002 | Brake vacuum electrovalves concern.Fault: Water ingress into the underbonnet vacuum electrovalves may cause a reduction in power assistance at the brake pedal. Malfunction of the electrovalves could also adversely affect the engine exhaust emissions. Fix: Replace the three electrovalves as a precaution and install a protective shield over them. | 80 |
| Nov 2000 | Potential loss of brake vacuum assistanceFault: Possibility of failure of the vacuum pump drive dog leading to a loss of brake assistance. Fix: Recall the potentially affected range of vehicles and replace the drive dog on those equipped with a Magneti Marelli Vacuum pump | 2,812 |
| Nov 1998 | Possible premature wear of handbrake ratchet pawlFault: Premature wear of the handbrake ratchet pawl may lead to inadvertent release of the handbrake. Problem of material hardness discovered in Quality Control tests. Fix: All vehicles from the period of production that may have a defective lever to be recalled and a new lever fitted. | 689 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my Dispatch has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Citroen Dispatch had?
DVSA's recalls data lists 69 safety recalls covering the Citroen Dispatch, the most recent dated 13 March 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Citroen Dispatch?
See used Citroen Dispatch cars listed on the MotifyMe® marketplace.
See Dispatch cars for sale