Toyota Yaris Recalls
Safety recalls covering the Toyota Yaris in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 40 safety recalls covering the Toyota Yaris, the most recent dated 1 December 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Toyota Yaris recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Dec 2025 | Parking assist ECU reprogram on multiple modelsFault: For certain vehicles equipped with a Parking Assist ECU a component of the Panoramic View Monitor (PVM) system that displays the rear view image the software may cause the rear view image to freeze or not display Fix: Reprogram the parking assist ECU. | 12,195 |
| Nov 2025 | Combination meter reprogramming on multiple modelsFault: For certain vehicles equipped with the combination meter system (where various information is displayed) that due to an improper programming of the combination meter unnecessarily repetitive data is written to a memory device. This may cause the memory device to deteriorate and the monitor to not display during the meter at start up and remain in this state permanently. Fix: Reprogram or replace the combination meter. | 13,573 |
| Oct 2023 | On affected vehicles there is a possibility that the dcm may not complete the shutdown process within a specific period of time when the ignition is turned off causing the dcm to not restart at the next ignition cycle and making the e-call function unavailable. as a result the vehicles do not comply with relevant regulations.Fault: On affected vehicles there is a possibility that the DCM may not complete the shutdown process within a specific period of time when the ignition is turned off causing the DCM to not restart at the next ignition cycle and making the e-Call function unavailable. As a result the vehicles do not comply with relevant regulations. Fix: The software of the DCM (Data Communication Module) will be updated via an Over the Air (OTA) wireless update. | 54,654 |
| Aug 2023 | Affected vehicles have wheel nuts on the right-side front and rear wheels may not have been torqued correctly due to improper tightening of the nuts when installing the wheels at the vehicle assembly plant.Fault: Affected vehicles have wheel nuts on the right-side front and rear wheels may not have been torqued correctly due to improper tightening of the nuts when installing the wheels at the vehicle assembly plant. Fix: Check and tighten wheel nuts. | 126 |
| Nov 2022 | Due to an improper programming of hybrid system vehicle might not enter a failsafe driving mode.Fault: There is a possibility that the vehicle will not enter a failsafe driving mode if a temporary slip occurs in the input damper of the hybrid transaxle.� Fix: Reprogram the HV ECU. | 6,857 |
| Apr 2022 | The initialization of the radar sensor may not have been completed correctlyFault: The initialization of the radar sensor may not have been completed correctly. Fix: Inspect the radar sensor and if necessary properly initialize the radar sensor. | 85,108 |
| Nov 2021 | The emergency calling system (ECALL) may not function when requiredFault: The emergency calling system (eCall) may not function when required. Fix: Inspect the emergency calling system and update DCM software. If the DCM is found to be damaged replace it with updated software. | 53,150 |
| Jun 2021 | Due to an inappropriate software the skid control ECU may not complete all its processing tasksFault: Due to an inappropriate software the Skid Control ECU may not complete all its processing tasks. Fix: Reprogram the Skid control ECU. | 19,992 |
| Jan 2021 | There is a possibility that the centre rear SEAT belt may be damaged by a sharp edge of the bracketFault: There is a possibility that the centre rear seat belt may be damaged a sharp edge of the bracket. Fix: Add a protective material to the seat belt anchor bracket. | 4,015 |
| Oct 2020 | It may not be possible to switch headlights from high beam to low beam or low beam to high beamFault: It may not be possible to switch headlights from high beam to low beam or low beam to high beam. Fix: Replace the Headlamp Units | 106 |
| Oct 2020 | Takata airbag inflator may rupture on deploymentFault: The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture Fix: Replace the airbag inflator or the airbag assembly. Toyota is still preparing for the development and production of the remedy parts | 37,586 |
| Mar 2020 | The resin spacers could be deformed by heat causing the engine cylinder head bolts to become looseFault: A loss of injector sealing and resulting in fuel leakage. Fix: Replace the injector spacer and bolts with new ones of the correct specification | 99 |
| Jan 2020 | The vehicles may be equipped with front passenger airbag inflators not appropriate for the vehiclesFault: Vehicles may be equipped with front passenger airbag inflators not appropriate for the vehicles Fix: Inspect and replace the affected parts if necessary | 725 |
| Nov 2019 | A transistor to the circuit board in the DC-DC convertor could be inadequateFault: The hybrid system could shut down resulting in loss of motive power Fix: Inspect and replace the DC-DC converter with new one if necessary | 3,274 |
| Jun 2019 | A crack could develop on the insulation of the wire harnesses of the front SEAT side airbag sensorsFault: The front seat side airbags could be deactivated and/or the curtain airbags may not operate as intended. Fix: Inspect the front door wire harness and replace if necessary. | 1,472 |
| Dec 2018 | Front passenger air bag inflators containing degraded propellant may result in an inflator ruptureFault: Passenger air bag may cause injury if activated. Fix: Replace affected air bag assembly. | 99,588 |
| May 2017 | Front driver airbag inflator may ruptureFault: On affected vehicles the drivers front airbag inflator could produce excessive internal pressure. If an affected airbag deploys the increased internal pressure may cause the inflator to rupture. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant. Fix: Recall the vehicles that are likely to be affected and replace the inflator inside the drivers airbag module with a new one. | 449 |
| Jul 2016 | Directional control could be compromisedFault: There is a possibility that a strut top mounting bearing could be damaged when a high load is applied to the strut such as when the vehicle is driven over a large bump. If this occurs there could be abnormal noise when driving on uneven roads or when turning the steering wheel. If the vehicle continues to be operated the upper side of the strut rod could separate causing a loss of vehicle stability which could increase the risk of a crash. Fix: Recall the vehicles that are likely to be affected and replace the strut mounting bearings with improved ones. If a strut mounting bearing is found to be damaged the dealer will replace the strut and front suspension support sub-assembly with a new one. | 5,526 |
| May 2016 | Rear SEAT belt may failFault: The vehicles are equipped with 3-point lap-shoulder belt assemblies in all-three rear seating positions. The inner belt (buckle portion) of each of the rear three seat belt assemblies is secured to the floor of the vehicle with an anchor plate. The anchor plate might have been manufactured with a sharp edge around the punched portion. In the event of a collision there is a possibility that the inner seat belt webbing could become cut and separate at the anchor plate. If this occurs the inner seat belt may not properly restrain the occupant which could increase the risk to injury. Fix: Recall the vehicles that are likely to be affected and check the Lot number of the anchor plate. Where necessary the rear inner belt assembly will be replaced with a new one. | 7,418 |
| Dec 2015 | Risk of fireFault: Affected vehicles are equipped with a driver�s side Power Window Master Switch (PWMS) containing sliding electrical contact modules. These modules may not have been incorrectly coated during the manufacturing process. This may cause a short circuit which could cause the switch to overheat and melt Fix: Inspect switch and apply coating. If switch indicates signs of malfunction it should be replaced. | 123,306 |
| Jun 2015 | Driver side airbag may ruptureFault: Subject vehicles are fitted with driver's air bag assemblies with single stage inflators. There is an increases potential for moisture ingress which could make the inflator more susceptible to rupture during deployment. Fragments may injure occupants. Fix: Recall the vehicles that are likely to be affected to replace the airbag. | 63,333 |
| Jun 2015 | Passenger side airbag may fail to deploy correctlyFault: The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire. Fix: Recall the vehicles that are likely to be affected to replace the airbag. | 2,713,755 |
| Mar 2015 | Wheel hub may become looseFault: One or more of the rear hub retaining bolts may have not been tightened to the correct specification. A bolt or bolts may work loose and could have an adverse affect on the braking performance or could cause a wheel to lock unintentionally. Fix: Recall affected vehicles. Check bolts for tightness and if required tighten to correct specification. Where necessary replace bolts. | 1,620 |
| Jan 2015 | Risk of fireFault: Oil may accumulate in the turbo charger and in certain circumstances flow into the combustion chamber. This may cause engine damage. In extreme cases oil can be ejected from the engine and if it comes in contact with an ignition source may result in a fire. Fix: Depending vehicle diagnosis modify intercooler layout to improve air flow; upgrade ECU software; upgrade turbo charger and/or vacuum pump | 7,884 |
| Jan 2015 | Drivers airbag may rupture if deployedFault: On affected vehicles the drivers front airbag inflator could produce excessive internal pressure. If an affected airbag deploys the increased internal pressure may cause the inflator to rupture. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant. Fix: Recall the vehicles that are likely to be affected and replace the inflator inside the drivers airbag module with a new one. | 1,347 |
| Dec 2014 | Brake fluid may leakFault: Some front right hand brake callipers were produced with an incorrect chamfer dimension. With an incorrect chamfer it is possible that the oil seal gets damaged and that a brake fluid leak occurs. If a leak occurs the driver will notice the illumination of the brake warning lamps. Fix: Recall the vehicles that are likely to be affected to replace the front right hand brake calliper. | 22 |
| Apr 2014 | Steering column may become unsecuredFault: The steering column mounting bracket may not be of sufficient strength if the steering is repeatedly and forcibly turned on full lock. This over a prolonged period can result in the failure of the bracket and ultimate detachment of the steering column. Fix: Recall all affected vehicles and replace the steering column mounting bracket. | 9,345 |
| Apr 2014 | Seat rail mechanism could failFault: The drivers and front passengers seat forward/rearward adjustment mechanism locking spring could fail under repeated operation of the mechanism. The seat may not lock into the adjusted position. If the vehicle is operated with a broken seat rail spring the seat could move in the event of a crash Fix: Recall all affected vehicles and replace the spring. | 10,317 |
| Aug 2013 | Short circuit may cause failure of the power assistanceFault: It is possible for condensation water droplets to form within the relay in the electric power steering control module. This can cause a short circuit across terminals within the relay. If this occurs and abnormally high voltage is detected by the control module it will shut down the power to the EPS which will coincide with a warning buzzer and light illuminating on the dash. This will result in the loss of power assistance to the steering. Fix: Recall all affected vehicles and replace the power control module. | 64,908 |
| Aug 2013 | Braking efficiency may be affectedFault: It is possible that a brake fluid leak could develop on brake pipe unions of either of the rear brake calipers or rear brake cylinders. If this occurs then the driver will receive a warning in the form of a warning light illuminating on the instrument panel. However if the driver does not heed this warning the braking efficiency of the vehicle could be impaired and the stopping distance increased. Fix: Recall all affected vehicles to check re-tighten the unions and if required replace any damaged/defective components. | 19,552 |
| Apr 2013 | Passenger side airbag may fail to deploy correctlyFault: The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant and the possibility of a fire. Fix: Recall the vehicles that are likely to be affected to replace the airbag. | 85,405 |
| Oct 2012 | Fire may occurFault: It is possible moisture or other fluids may enter the drivers window and contaminate the main power window switch. If this occurs and the switch is damaged it could overheat and cause it to melt and/or smoke. If this situation is not identified it could result in a vehicle fire. Fix: Recall all affected vehicles and check the switch. If the switch is not damaged a waterproof cover will be fitted. If the switch is damaged it will be replaced and a waterproof cover will be fitted. | 276,098 |
| Sep 2011 | Body trim may cause injuryFault: Due to the improper installation of the left A-pillar trim there ia a possibility that the trim may become detached when the curtain shield airbag would deploy during a crash. If this happens the loose garnish could injure the LH seat occupant of the vehicle. Fix: Inspection of the installation and repair if needed. | 10,587 |
| Aug 2010 | If deployed the airbag may endanger passengerFault: The combustion rate of the airbag propellant may be too fast causing excessive internal pressure in the inflator during airbag deployment. In an extreme case the inflator casing may rupture leading to a scattering of metal fragments. Fix: Recall the vehicles that are likely to be affected to replace the front passenger airbag assembly. | 14 |
| Feb 2010 | Accelerator pedal may fail to return to idleFault: It has been identified that on affected vehicles condensation resulting from cold-weather use of the heater or other causes may form on the worn surface of a component within the throttle pedal assembly known as the friction device. If this occurs there is a possibility that in the worst case the accelerator pedal may return slowly or does not return to the engine idle position. Fix: Recalled vehicles will have a precision-cut steel reinforcing bar fitted into the accelerator pedal assembly which will create a space in order to reduce the surface tension between the friction device and a component referred to as the pedal arm. The subject bar also strengthens the reaction force of the spring that returns the accelerator pedal to it's non-pressed position. | 174,426 |
| Apr 2009 | Fire may occurFault: It has been identified that the possibility exists that the sound insulator beneath the front seatbelt pretensioner may become damaged by the high temperature gas generated when the device is activated during a collision. In the worst case should the insulator ignite a post-collision fire may ensue. Fix: Recalled vehicles will have the sound insulator removed from beneath the centre body pillars. | 90,670 |
| May 2007 | Seating headrests may detach & airbag may not deploy sufficiently in an impactFault: It has been identified that the following seat defects may occur a Front and rear seats - the locking performance of the headrest may be insufficient during an impact and may cause ejection of the headrest from the seat back. b Front seats only- The reliability of the side airbag deployment on the front seats may be insufficient during an impact and may not offer the protection intended. Fix: Recalled vehicles will have the following remedial actions performed:-a) The rear seat headrest guide springs and buttons will be replaced.b) The front seat headrest supports will be replaced. c) The front seat back pads and covers will be replaced. | 19,075 |
| Nov 2006 | Engine may stallFault: Due to improper moulding of the body of the crankshaft position sensor engine oil may penetrate the seal and enter the sensor wiring connector. In this condition the engine oil within the sensor's wiring connector may expand due to engine heat and could deform the sensor. In the worst case the connector may become disconnected which could cause the engine to stall while driving and restarting would not be possible. Fix: Recalled vehicles will have the crankshaft position sensor replaced. | 15,786 |
| Nov 2002 | Rear brake pipe concernFault: In frequent stop/start conditions in snow and severely cold weather compacted snow/ice may build up on the inner face of the wheel disc. In extreme circumstances the snow/ice may strike and distort the metal pipe that connects to the rear brake cylinder. Impaired braking and a hydraulic fluid leak may result. Fix: Fit a modified and re-routed brake pipe. | 49,470 |
| Apr 2000 | Rear wheels may lock under hard brakingFault: There is a possibility that under certain conditions when applying the brakes hard and suddenly as in a panic situation a locking of the rear wheels may occur. The vehicle handling will then become unstable. Fix: Recall affected vehicles and replace brake proportioning valve with a modified type. | 19,639 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my Yaris has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Toyota Yaris had?
DVSA's recalls data lists 40 safety recalls covering the Toyota Yaris, the most recent dated 1 December 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Toyota Yaris?
See used Toyota Yaris cars listed on the MotifyMe® marketplace.
See Yaris cars for sale