Ford Mondeo Recalls

Safety recalls covering the Ford Mondeo in DVSA's recalls data, newest first.

Last updated 22 November 2026

Short answer:

DVSA's recalls data lists 31 safety recalls covering the Ford Mondeo, the most recent dated 5 May 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Check a registration for outstanding recalls, free

31Recalls listed
5 May 2026Latest recall
26 September 1994Earliest listed
1,216,864Vehicles affected

Every Ford Mondeo recall

Open a recall to see the fault, the fix and the build dates it covers.

DateRecallVehicles affected
May 2026
Multi vehicle line (MVL): telecommunications control module (TCU) loss of function software update

Fault: Affected vehicles may experience a loss of emergency call system (eCall) functionality which impacts both automatic and manual eCall events.

Fix: Update the Telematics Control Unit software to the latest level.

Recall R/2026/181 · Dated 5 May 2026 · Built 14 November 2019 to 12 November 2020

13
Sep 2025
Crosscar: SYNC3 rear-view camera software update

Fault: On affected vehicles a software problem may result in issues with the rear-view camera that reduce the driver's view or with it remaining on after a reversing event.

Fix: Update the vehicle software to the latest level.

Recall R/2025/359 · Dated 8 September 2025 · Built 20 September 2019 to 20 September 2019

1
Dec 2024
X-car powertain control module (PCM) software update

Fault: Affected vehicles may develop a crack in the Diesel Particulate Filter (DPF).

Fix: Update software to prevent a cracked DPF. Test and replace DPFs that are already cracked.

Recall R/2025/094 · Dated 19 December 2024 · Built 18 January 2019 to 17 February 2022

3,532
May 2024
Brake hose leak

Fault: On affected vehicles there is the possibility of the front brake hoses leaking.

Fix: Replace both front brake hoses and modify the hose routing and ride height sensor if necessary.

Recall R/2026/076 · Dated 23 May 2024 · Built 19 May 2014 to 8 July 2017

19,006
Oct 2020
Takata air bag inflator may rupture on deployment

Fault: Drivers airbag may not deploy correctly

Fix: Replace Driver air bag assembly

Recall R/2020/013 · Dated 30 October 2020 · Built 6 February 2007 to 28 February 2017

219,738
Aug 2019
Potential battery acid leakage around negative terminal

Fault: Possible thermal incident within the battery monitor sensor wiring

Fix: Install a fused jumper loom into the battery monitor sensor wiring

Recall R/2019/212 · Dated 29 August 2019 · Built 13 February 2014 to 11 February 2019

56,154
Jun 2019
Overheating of the engine cylinder head may cause the cylinder head to crack

Fault: localized overheating of the engine cylinder head may cause the cylinder head to crack.This may cause a pressurized oil leak which in extreme circumstances could result in a fire in the engine compartment.

Fix: A coolant level sensor needs to be fitted to provide an audible and visual warning to the customer and in extreme circumstances reduce the engine power.

Recall R/2019/020 · Dated 14 June 2019 · Built 2 June 2010 to 20 December 2014

4,026
Feb 2019
Vehicle could suffer clutch pressure plate fracture

Fault: A number of vehicles fitted with a 1.0 1.5 or 1.6 Ecoboost engine and 6-speed manual transmission could suffer clutch pressure plate fracture. This results in clutch smell reduced vehicle speed and performance. In the unlikely event of clutch pressure plate fracture a noise (thud / bang) could be heard from the vicinity of the transmission in extreme cases resulting in clutch / transmission fragments being released and striking under hood components creating a risk of smoke and fire from the under hood area.

Fix: To prevent the repeated heating /cooling events a new calibration has been developed for vehicles fitted with Engine Stop Start feature. The software with the additional feature sets the Instrument panel �Wrench light� and de-rates the engine performance if prolonged clutch slip is detected. The software feature includes a drive cycle strategy for latching the wrench light and engine performance de-rate if the customer should experience repeated clutch slip events. For vehicles that do not have Engine Stop Start feature an alternative clutch kit has been released.

Recall R/2018/351 · Dated 22 February 2019 · Built 30 June 2016 to 30 May 2018

66,497
Dec 2018
The tilt/slide roof opening panel glass s not correctly bonded to its mounting

Fault: Tilt/slide roof opening panel glass is not correctly bonded to its mounting.

Fix: Install a new roof opening glass panel on affected vehicles.

Recall R/2018/257 · Dated 19 December 2018 · Built 22 August 2017 to 14 December 2017

11
Nov 2018
Possible low torque condition with the air conditioning clutch fastener

Fault: A/C Compressor pulley may become detached.

Fix: On affected vehicles fit a new A/C compressor clutch pulley.

Recall R/2018/213 · Dated 7 November 2018 · Built 1 September 2014 to 20 April 2018

3,021
Jul 2018
Clutch pressure plate may fracture

Fault: Affected vehicles fitted with a 1.0 1.5 or 1.6 Ecoboost engine and 6-speed manual transmission could suffer clutch pressure plate fracture. This results in clutch smell reduced vehicle speed and performance. In the unlikely event of clutch pressure plate fracture a noise (thud / bang) could be heard from the vicinity of the transmission in extreme cases resulting in clutch / transmission fragments being released and striking under hood components creating a risk of smoke and fire from the under hood area.

Fix: To prevent the repeated heating /cooling events a new calibration has been developed for vehicles fitted with Engine Stop Start feature. The software with the additional feature sets the Instrument panel �Wrench light� and de-rates the engine performance if prolonged clutch slip is detected. The software feature includes a drive cycle strategy for latching the wrench light and engine performance de-rate if the customer should experience repeated clutch slip events. For vehicles that do not have Engine Stop Start feature an alternative clutch kit has been released.

Recall R/2018/082 · Dated 16 July 2018 · Built 1 August 2009 to 30 June 2016

122,199
Mar 2018
Oil sump may crack due to the engine overheating

Fault: The engine control module calibration may not adequately detect an overheat condition in certain 2.0L Duratorq Diesel engines. In extreme cases an overheated engine can result in a breach of the oil sump leading to loss of the engine oil.

Fix: Recall the vehicles that are likely to be affected and download revised software for the control module calibration that improves overheat detection and provides an instrument cluster warning indicator to the driver and engine de-rate strategy.

Recall R/2018/053 · Dated 12 March 2018 · Built 19 September 2014 to 28 September 2015

48,595
Feb 2017
Seat belt pre-tensioner may malfunction

Fault: The driver side front seat belt pre-tensioner cable could separate during deployment leaving the driver inadequately restrained in a collision which increases the risk of injury.

Fix: Recall the vehicles that are likely to be affected and fit a new driver side front seat belt assembly.

Recall R/2017/020 · Dated 22 February 2017 · Built 5 August 2014 to 31 July 2016

9
Jun 2016
Headlamps may switch off without warning

Fault: Vehicles fitted with Adaptive LED Headlamps could experience a condition where the loss of a control signal in combination with a software error may cause the headlamps to switch off. There is a risk of collision if defect happens at night.

Fix: Recall the vehicles that are likely to be affected and updated software will be loaded to the affected modules.

Recall R/2016/113 · Dated 20 June 2016 · Built 3 May 2014 to 22 December 2015

9,705
Sep 2013
Fire may occur

Fault: It is possible that a leak can occur between the injector spill rail connection and the plastic fuel return pipe. This can cause leakage of fuel which can either pool on the engine cylinder head and then become deposited onto the road surface where it could cause a skid risk to other motorist or if the fuel comes into contact with extremely hot engine components an exhaust manifold for instance it is possible that an under bonnet fire could ensue.

Fix: Recall all affected vehicles inspect the fuel spill rail/return pipe and if required replace the spill rail with a new modified rail.

Recall R/2013/103 · Dated 13 September 2013 · Built 12 January 2012 to 11 February 2013

1,985
May 2011
Headlights and indicators may malfuntion

Fault: Vehicles affected could demonstrate symptoms such as headlamps and indicators flashing unintentionally and/or headlamps switching off. The concern is due to software errors.

Fix: The vehicles that are likely to be affected are to be recalled to have modified software applied to the Body Control Module and Power Train Control Module.

Recall R/2011/040 · Dated 18 May 2011

4
May 2009
Hard brake pedal may occur during engine warm up

Fault: During engine warm up it is possible that the non return valve within the vacuum pump may stick. It is possible that if sufficient brake applications are made before the valve releases the vacuum stored within the brake booster will be used up and a hard brake pedal and longer stopping distances may result.

Fix: Recall the vehicles that are likely to be affected to fit a revised design of non return valve to the brake vacuum pump.

Recall R/2009/050 · Dated 21 May 2009 · Built 1 November 2008 to 12 March 2009

13,029
Apr 2009
Abs may not function correctly

Fault: The brakes may lock up under emergency braking conditions due to valves in the hydraulic control unit being of incorrect specification.

Fix: Recall the vehicles that are likely to be affected to replace the hydraulic control unit.

Recall R/2009/043 · Dated 9 April 2009

2
Aug 2004
Possible unexpected braking.

Fault: The yaw rate sensor may be out of specification which may lead to unexpected braking

Fix: Recall affected vehicles inspect sensors and renew as necessary

Recall R/2004/132 · Dated 2 August 2004 · Built 22 June 2004 to 9 July 2004

91
Apr 2004
There is a possibility of unexpected braking.

Fault: Yaw rate sensor out of specification the effect of which may result in unexpected braking

Fix: Likely to be affected vehicles will be recalled for inspection of the yaw sensors which will be replaced as necessary.

Recall R/2004/065 · Dated 30 April 2004 · Built 17 February 2004 to 11 March 2004

205
Aug 2003
Modification of handbrake lever

Fault: The handbrake may not hold the vehicle stationary when parked if it is not applied as directed in the owner literature.

Fix: Fit a revised handbrake assembly with an improved leverage ratio.

Recall R/2003/083 · Dated 4 August 2003

72,682
Feb 2003
Power steering pressure hose may chafe on engine inlet manifold.

Fault: The power steering pressure hose may chafe on the engine inlet manifold. This could ultimately result in an oil leak and a loss of power assistance to the steering.

Fix: Fit latest production level revised routing power steering pressure hose.

Recall R/2003/007 · Dated 3 February 2003 · Built 5 March 2002 to 14 November 2002

801
Jul 2002
Battery cable may chafe and short circuit

Fault: Battery cable may chafe on transmission valve cover plate.

Fix: Recall affected vehicles check cable insulation repair if necessary and retain cable clear of cover plate.

Recall R/2002/088 · Dated 10 July 2002 · Built 1 June 2000 to 31 May 2002

8,888
Apr 2002
Parking brake concern.

Fault: Under certain parking conditions the vehicle handbrake may not prevent the vehicle from moving.

Fix: Ford Dealers will fit an extension block to both rear caliper handbrake actuation levers.

Recall R/2002/018 · Dated 20 April 2002 · Built 1 October 2000 to 5 July 2001

55,515
Oct 2001
Parking brake ratchet concern

Fault: The design of the parking brake ratchet teeth can allow a partial engagement resulting in damage to the tooth which can then slip to the next tooth. If ignored the wear will continue on the next tooth and the efficiency of the parking brake may become insufficient to hold the vehicle in place.

Fix: Replace parking brake lever assembly with one that has a revised tooth profile.

Recall R/2001/113 · Dated 8 October 2001 · Built 1 November 1999 to 1 May 2000

32,642
May 2000
Brake fluid may leak from pressure limiting valve

Fault: Corrosion of the rear brake pressure limiting valve may allow brake fluid to leak from a joint.

Fix: Recall affected vehicles and replace pressure limiting valve.

Recall R/2000/042 · Dated 30 May 2000 · Built 2 January 1996 to 7 August 1998

160,373
Oct 1999
Door latch concern

Fault: Some vehicles have been built with door latches which may not be to specification. An internal plastic pawl within the assembly may seize which results in the latch failing to function as designed preventing the door being securely shut.

Fix: Recall affected vehicles and fit quality assured replacement door latches.

Recall R/1999/084 · Dated 7 October 1999 · Built 3 September 1998 to 18 November 1998

32,232
Jun 1998
Unexpected deployment of passenger air bag

Fault: Unexpected passenger air bag deployment due to an electrostatic discharge through the air bag igniter.

Fix: Recall affected vehicles and fit ground wire to passenger air bag

Recall R/1998/037 · Dated 9 June 1998 · Built 1 August 1996 to 28 February 1998

15,780
Mar 1996
Possible failure of offside front brake caliper

Fault: It is possible that some Mondeo vehicles may have been fitted with a right hand front brake caliper where the casting is not to specification. In time this may result in fluid leakage with the loss of one brake circuit.

Fix: Recall the affected vehicles for a check on the manufacturing date of the subject caliper. Caliper units falling within the affected range will be replaced.

Recall R/1996/040 · Dated 15 March 1996 · Built 10 October 1995 to 12 October 1995

1,812
Jan 1996
Failure of braking system vacuum assistance

Fault: The brake vacuum pump may cease to provide vacuum assistance. Should this occur greater brake pedal pressure would be needed and stopping distances may be increased.

Fix: The affected vehicles are being recalled to Ford dealers to have the brake pump manufacturing codes checked. Vacuum pumps within certain ranges will be replaced with new units. This campaign supersedes recall R1995/081 and includes all the vehicles alrea

Recall R/1996/022 · Dated 23 January 1996

56,864
Sep 1994
Failure of headlamps

Fault: A possibility exists that excessive torque generated when turning on the headlamp switch may induce an internal open circuit and cause the headlamps to go out.

Fix: Recall the affected vehicles for replacement of the headlamp switch with a revised component.

Recall R/1994/038 · Dated 26 September 1994 · Built 1 October 1992 to 14 July 1993

211,452

Nothing matches that search on this page.

Vehicles affected is the number DVSA lists for each recall.

How to check a car for recalls

A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.

A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.

Frequently asked questions

How do I check if my Mondeo has an outstanding recall?

Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.

How many recalls has the Ford Mondeo had?

DVSA's recalls data lists 31 safety recalls covering the Ford Mondeo, the most recent dated 5 May 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Does a recall mean a car is unreliable?

No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

What should I do if my car is affected by a recall?

Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.

Where does this recall data come from?

From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.

Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.

Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.

Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.

Free vehicle check on WhatsApp

Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.

Open WhatsApp

How it works

Looking for a Ford Mondeo?

See used Ford Mondeo cars listed on the MotifyMe® marketplace.

See Mondeo cars for sale