Honda Recalls
Every Honda safety recall in DVSA's recalls data, with the models each one covers.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 90 safety recalls for Honda vehicles since 1994, the most recent dated 16 February 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check a registration with our free reg lookup to see whether that car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Honda recalls by model
| Model | Recalls listed | Latest recall |
|---|---|---|
| Honda Civic | 45 | Feb 2026 |
| Honda CR-V | 29 | Mar 2025 |
| Honda Jazz | 26 | Aug 2022 |
| Honda HR-V | 3 | Aug 2020 |
A recall can cover more than one model, so model counts can add up to more than the make total.
Latest Honda recalls
The 30 most recent. Open a model above for its full list.
| Date | Recall | Vehicles affected |
|---|---|---|
| Feb 2026 | Civic wheel steel bushes missing (accessory)Fault: On affected vehicles the alloy steel bushes may be missing in all five positions of the alloy wheel. This may result in the wheel nuts falling off or in the worst-case scenario wheel detachment. Fix: Inspect the wheels for the presence of bush and replace wheel(s) in case of missing bushes. | 46,152 |
| Jan 2026 | 23-24m e:ny1 combination meter total mileage display malfunctionFault: On affected vehicles after the voltage of the 12V battery drops when the vehicle is started after charging or replacing the battery the ODO distance displayed on the Meter is reset to 0 miles. This does not comply with the relevant regulations. Fix: Install updated software. | 5,892 |
| Mar 2025 | 22-25m Civic and other models EPS gear box worm wheel swelling failure 6jpFault: On affected vehicles due to decrease of the grease amount in the worm wheel gear meshing area of the EPS gear box during use the sliding resistance at the meshing area increases and the torque fluctuation when turning the steering becomes larger resulting in an abnormal noise or a dangerous sticking occurs when turning the steering. Fix: For the Honda Civic (FL4 FE1) CR-V and ZR-V models replace the worm gear pre-load spring with a countermeasure part and add grease. For the Honda Civic Type R (FL5) model replace the Steering Gearbox with a countermeasure part. | 22,184 |
| Jan 2025 | Trailer hitch incorrect part number label attached (accessory)Fault: Affected vehicles may have been fitted with an incorrectly labelled trailer hitch of the wrong specification which may come into contact with the Integrated Power Unit (IPU) when a rear-end collision occurs and result in a short circuit in the high-voltage power system or a risk of fire. Cracks may also appear on the trailer hitch weld seams when towing excess weight for prolonged periods which could result in a risk of trailer hitch detachment. Fix: Inspect and replace the trailer hitch with the correct part if necessary. | 64 |
| Dec 2024 | 23-25m high pressure fuel pump solenoid component part breakage - 6ypFault: On affected vehicles due to manufacturing issues the high pressure fuel pump could leak Fix: On the affected vehicles check for leaks and replace the high pressure pump if necessary | 21,431 |
| Dec 2024 | 23ym Civic lithium-ion battery negative terminal defectFault: On affected vehicles the Hybrid HV battery may develop a fault where battery electrolyte leakage occurs that may result in a vehicle fire in a worst-case scenario. Fix: Replace the Hybrid HV battery with a modified component. | 40 |
| Nov 2024 | 23-24m zr-v and others overspeed alarm inoperativeFault: On affected vehicles after cancelling the ACC (Adaptive Cruise Control) the ISA (Intelligent Speed Assistance) will not alert the driver when over speed. Fix: Update Multipurpose Camera Unit with modified software. | 6,916 |
| Apr 2024 | Battery cable contact short circuit problemFault: In certain collisions the cable may be pinched between the body and the collision object and may be damaged. This may result in a short circuit to the power circuit and the battery cable can overheat increasing the risk of a fire and/or injury. Fix: Install fuse in cable. | 18,733 |
| Jan 2024 | The positions of the conveyor bar and the SEAT were not properly managed causing interference between the conveyer bar and the headrest. as a result the headrest may bend forward and it may not be possible to protect occupants as intended which may lead to risk of injury.Fault: The positions of the conveyor bar and the seat were not properly managed causing interference between the conveyer bar and the headrest. As a result the headrest may bend forward and it may not be possible to protect occupants as intended which may lead to risk of injury.� Fix: Inspect replace seat and head rest if required | 653 |
| Aug 2022 | The front wide camera may not start up in the correct way after the vehicle has startedFault: The front wide camera may not start up in the correct way after the vehicle is started. Fix: Change the software in the Front Wide Camera. | 30,928 |
| Mar 2021 | The seatbelt reminder is not displayedFault: The seatbelt reminder is not displayed. Fix: Carry out a software update. | 785 |
| Feb 2021 | Liquid could enter the power window Master switch and a short circuit could occurFault: Power window switch can accumulate water causing overheat and possible fire. Fix: Replace power window master switch with one designed to prevent water accumulation | 77,836 |
| Oct 2020 | The absorption of moisture into the driver's air bag propellant could lead to slow deployment or inflator ruptureFault: The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture. Fix: Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts. | 381,915 |
| Aug 2020 | Vehicles may be equipped with a fuel pump module manufactured with low density impellarsFault: Affected vehicles may be equipped with a fuel pump module manufactured with low density impellers. Fix: The affected fuel pumps will be replaced. | 76,887 |
| Aug 2020 | Due to incorrect manufacturing the rear SEAT belt assembly webbing sensor could become inoperativeFault: The webbing sensor in the rear centre seat belt assembly could become inoperative. Fix: Check and if the seat belt is within the affected range the seat belt will be replaced. | 2,072 |
| Jan 2020 | The regulatory requirement for emissions levels are not metFault: The regulatory requirement for emissions levels are not met. Fix: Update the software in the Engine Control Unit to improve the performance of the emissions control system | 152,469 |
| Aug 2019 | Possible air bag inflator ruptureFault: Driver air bag may not deploy correctly. Fix: The inflator inside the drivers airbag module is to be replaced. | 129 |
| Aug 2019 | Possible air bag inflator ruptureFault: Passenger air bag may not deploy correctly. Fix: The inflator inside the passenger�s airbag module is to be replaced. | 979,176 |
| Aug 2019 | Possible air bag inflator ruptureFault: Driver air bag may not deploy correctly. Fix: The inflator inside the drivers airbag module is to be replaced. | 24 |
| Aug 2019 | Possible air bag inflator ruptureFault: Passenger air bag may not deploy correctly. Fix: The inflator inside the passenger�s airbag module is to be replaced. | 3 |
| May 2019 | Inner pressure of the inflator may irregularly rise upon airbag deployment rupturing the inflator containerFault: Driver air bag may not ignite correctly. Fix: Replace the drivers air bag assembly. | 27 |
| Jan 2019 | Takata passenger airbag inflator may ruptureFault: Passenger airbag inflators may not operate as intended. Fix: Replacement of Airbag Assembly on affected vehicles. | 599,135 |
| Jan 2019 | Takata passenger airbag inflator may ruptureFault: Passenger airbag inflators may not operate as intended. Fix: Replacement of Airbag Assembly on affected vehicles. | 21,494 |
| Nov 2018 | Crossover inlet pipe connecting left and right fuel tanks insufficienly weldedFault: The crossover inlet pipe connecting the left and right fuel tanks was insufficiently welded. Fix: Affected vehicles require replacement of the left and right fuel tanks. | 110 |
| Nov 2018 | Printed circuit board screws secured to high mount stop lamp housing may shift and contact the pcb circuitryFault: The metal screws that secure the printed circuit board to the high mount stop lamp housing may contact the PCB circuitry. Fix: Affected vehicles require replacement of the high mount stop lamp. | 103 |
| Oct 2018 | During assembly the cabin harness clip was broken resulting in the harness not being correctly secured in front left chassis rail / suspension turret areaFault: During vehicle assembly the cabin harness was pulled to make the process easier to manage. By pulling the harness a clip was broken or dislodged resulting in the harness not being correctly secured in the front left chassis rail / suspension turret area. In around 10% of affected units the harness makes contact with the transmission mount. The vibration of the transmission can cause the harness to be damaged. If the conductors are exposed this can result in a short circuit and blown fuse. Customer complaints are that the engine does not start and/or the wiper does not work. The engine does not start and/or the windscreen wipers do not work. Fix: The technician will carry out an inspection of the cabin harness and harness clip to determine the required repair: Replace harness clip if it is damaged/missing; Repair the cabin harness in the case of mild abrasion to the harness outer; Replace the cabin harness in the case of exposed conductors. | 5,097 |
| Jul 2018 | Side airbag may fail to deploy as intendedFault: The front seat back pad mould (seat back cushion) and side airbag (SAB) are fitted to the seat back frame. The SAB is fitted underneath the pad mould and the pad mould has been designed with a slit that allows the SAB to deploy from underneath the pad mould. Seat back pad moulds that were supplied for after-sales use were not manufactured correctly; the slit process was not completed. When a front seat pad without the slit is assembled to the car it may block SAB deployment and may not satisfy occupant protection performance which is a non-conformance to side impact regulation. Fix: Registered owners of affected vehicles will receive a notification letter that will ask them to take their vehicles to a dealership or authorised repairer for a free repair. The technician will carry out inspection to verify the condition of the front seat back pad mould and will replace the pad mould and if necessary the seat heater element and seat back cover. | 16 |
| Feb 2018 | Passenger airbag may fail to deploy correctlyFault: The propellant used in the air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing severe injury to the vehicle occupants. Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator and airbag. | 53,088 |
| Feb 2018 | Passenger airbag may fail to deploy correctlyFault: The propellant used in certain air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material possibly causing severe injury to the vehicle occupants. Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator unit. | 182,682 |
| Mar 2017 | Airbag may fail to deploy correctlyFault: Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment Fix: On affected vehicles replace the inflator inside the passenger's air bag module. | 114,025 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
Honda recalls by year
Recalls listed each year by launch date. The first bar groups all years before 2011.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my Honda has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls have Honda vehicles had?
DVSA's recalls data lists 90 safety recalls for Honda vehicles since 1994, the most recent dated 16 February 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check a registration with our free reg lookup to see whether that car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out