Honda CR-V Recalls
Safety recalls covering the Honda CR-V in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 29 safety recalls covering the Honda CR-V, the most recent dated 31 March 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Honda CR-V recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Mar 2025 | 22-25m Civic and other models EPS gear box worm wheel swelling failure 6jpFault: On affected vehicles due to decrease of the grease amount in the worm wheel gear meshing area of the EPS gear box during use the sliding resistance at the meshing area increases and the torque fluctuation when turning the steering becomes larger resulting in an abnormal noise or a dangerous sticking occurs when turning the steering. Fix: For the Honda Civic (FL4 FE1) CR-V and ZR-V models replace the worm gear pre-load spring with a countermeasure part and add grease. For the Honda Civic Type R (FL5) model replace the Steering Gearbox with a countermeasure part. | 8,082 |
| Jan 2025 | Trailer hitch incorrect part number label attached (accessory)Fault: Affected vehicles may have been fitted with an incorrectly labelled trailer hitch of the wrong specification which may come into contact with the Integrated Power Unit (IPU) when a rear-end collision occurs and result in a short circuit in the high-voltage power system or a risk of fire. Cracks may also appear on the trailer hitch weld seams when towing excess weight for prolonged periods which could result in a risk of trailer hitch detachment. Fix: Inspect and replace the trailer hitch with the correct part if necessary. | 64 |
| Dec 2024 | 23-25m high pressure fuel pump solenoid component part breakage - 6ypFault: On affected vehicles due to manufacturing issues the high pressure fuel pump could leak Fix: On the affected vehicles check for leaks and replace the high pressure pump if necessary | 5,447 |
| Nov 2024 | 23-24m zr-v and others overspeed alarm inoperativeFault: On affected vehicles after cancelling the ACC (Adaptive Cruise Control) the ISA (Intelligent Speed Assistance) will not alert the driver when over speed. Fix: Update Multipurpose Camera Unit with modified software. | 1,953 |
| Feb 2021 | Liquid could enter the power window Master switch and a short circuit could occurFault: Power window switch can accumulate water causing overheat and possible fire. Fix: Replace power window master switch with one designed to prevent water accumulation | 77,836 |
| Oct 2020 | The absorption of moisture into the driver's air bag propellant could lead to slow deployment or inflator ruptureFault: The absorption of moisture into the driver�s airbag propellant could lead to slow deployment or inflator rupture. Fix: Replace the airbag inflator or the airbag assembly. Honda is still preparing for the development and production of the remedy parts. | 42,435 |
| Aug 2020 | Vehicles may be equipped with a fuel pump module manufactured with low density impellarsFault: Affected vehicles may be equipped with a fuel pump module manufactured with low density impellers. Fix: The affected fuel pumps will be replaced. | 5,814 |
| Jan 2020 | The regulatory requirement for emissions levels are not metFault: The regulatory requirement for emissions levels are not met. Fix: Update the software in the Engine Control Unit to improve the performance of the emissions control system | 50,823 |
| Aug 2019 | Possible air bag inflator ruptureFault: Passenger air bag may not deploy correctly. Fix: The inflator inside the passenger�s airbag module is to be replaced. | 122,397 |
| Aug 2019 | Possible air bag inflator ruptureFault: Passenger air bag may not deploy correctly. Fix: The inflator inside the passenger�s airbag module is to be replaced. | 3 |
| Aug 2019 | Possible air bag inflator ruptureFault: Driver air bag may not deploy correctly. Fix: The inflator inside the drivers airbag module is to be replaced. | 8 |
| Jan 2019 | Takata passenger airbag inflator may ruptureFault: Passenger airbag inflators may not operate as intended. Fix: Replacement of Airbag Assembly on affected vehicles. | 21,494 |
| Feb 2018 | Passenger airbag may fail to deploy correctlyFault: The propellant used in the air bag inflators may degrade over time due to heat cycles and exposure to moisture. In the event that the airbag is activated it may overinflate due to overly aggressive combustion of the propellant. The excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing severe injury to the vehicle occupants. Fix: Recall the vehicles that are likely to be affected and replace the airbag inflator and airbag. | 39,816 |
| Mar 2017 | Airbag may fail to deploy correctlyFault: Abnormal deployment pressure may lead to rupture of the passenger's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment Fix: On affected vehicles replace the inflator inside the passenger's air bag module. | 22,805 |
| Aug 2016 | Passenger side airbag may fail to deploy correctlyFault: In the event that the airbag is activated excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the vehicle occupants and / or in worst cases a fatality. Fix: On affected vehicles replace the passenger front air bag module. | 46,444 |
| May 2016 | Drivers airbag inflator may rupture if deployedFault: Abnormal deployment pressure may lead to rupture of the driver's air bag inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment. Fix: On affected vehicles replace the inflator inside the driver's air bag module. | 252,174 |
| Jul 2015 | Unintended braking may occurFault: A possible issue with the software in the Collision Mitigation Brake System (CMBS) can under certain rare driving circumstances cause the incorrect or misdetection of objects or obstacles in front of the vehicle that do not actually pose a collision potential. This can cause the inapropriate application of the brake system even if the object is not present or even moving away from the vehicle and does not pose a rish of a collision. However the sudden application of the brakes may lead to a collision with following vehicles and result in possible injury to the vehicle occupants Fix: Recall all affected vehicles to have the CMBS software replaced with a new version. | 892 |
| Jun 2015 | Drivers airbag may rupture if deployedFault: Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled into the passenger compartment potentially causing injury to a vehicle occupant. Fix: On affected vehicles replace the drivers airbag module. | 121,686 |
| Jun 2015 | Passenger side airbag may fail to deploy correctlyFault: Abnormal deployment pressure may lead to rupture of the inflator case. In the event of an inflator rupture metal fragments could be propelled upward toward the windshield or downward toward the front passenger�s foot well potentially causing injury to a vehicle occupant. Fix: On affected vehicles replace the inflator inside the front passenger�s airbag module with a new one. | 242,653 |
| Mar 2015 | Passenger side airbag may fail to deploy correctlyFault: The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire. Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module. | 31,135 |
| Mar 2014 | Wrong size brake discs could reduce brake performanceFault: It is possible that the brake disc or discs installed to the front of the vehicle may not be the correct size. If left unchecked it could have a detrimental effect on the vehicle as it may cause deterioration in brake performance. Fix: Recall the vehicles that are likely to be affected to check which brake discs are fitted and where necessary fit brake discs of the correct size. | 2,363 |
| Apr 2013 | Passenger side airbag may fail to deploy correctlyFault: The subject vehicles are equipped with front passenger airbag inflators which could have been assembled with improperly manufactured propellant wafers. Improperly manufactured propellant wafers could cause the inflator to rupture and the front passenger airbag to deploy abnormally in a crash. This could result in increased risk of injury to the occupant or in a thermal issue in the interior compartment which may lead to fire. Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the airbag inflator module. | 120,730 |
| Nov 2012 | Fire may occurFault: It is possible moisture or other fluids may enter the drivers window and contaminate the main power window switch. If this occurs and the switch is damaged it could overheat and cause it to melt and/or smoke. If this situation is not identified it could result in a vehicle fire. Fix: Recall all affected vehicles and check the switch. If the switch is not damaged a waterproof cover will be fitted. If the switch is damaged it will be replaced and a waterproof cover will be fitted. | 77,301 |
| May 2012 | Low beam headlights may become inoperativeFault: Tension from the combination switch wiring harness can cause a small amount of movement when the combination switch is operated. Over time the low beam terminal can become worn leading to poor electrical continuity. Ultimately this may cause the low beam headlights to fail. Fix: Recall the vehicles that are likely to be affected to replace the low beam terminal harness and where necessary the lighting switch. | 41,272 |
| Aug 2011 | Power steering assistance may failFault: The cruise control may fail to disengage due to faults in the engine management controller software. If these faults persist the cruise control function will be inoperative. Fix: Recall the vehicles that are likely to be affected to replace the water pump pulley bolts with modified bolts. | 546 |
| Mar 2011 | Diesel fuel may leak from fuel pumpFault: Due to a production process at the seal suppliers cracks may occur in the affected seals and could potentially lead to a diesel fuel leak. If the seal cracks diesel may leak from the pump. The leaking fuel could result in diesel fuel smell also there may be some smoke or in the worst case scenario a fire. There have been no cases reported of cases of fire. Fix: A recall of the affected vehicles check the manufacturer date and serial number of the high pressure diesel pump and replace the pump if the serial number falls within the affected range. | 902 |
| Feb 2010 | Fuel may leakFault: Fuel may leak from an injector and/or fuel return pipe resulting in: loss of power illumination of malfunction indicator lamp diesel fuel small smoke and in the worse case fire. Fix: Recall the vehicles that are likely to be affected to check and if necessary refit the injector and fuel return pipes | 407 |
| Jun 2003 | Possible damage to inner sidewall of tyreFault: It is possible that the tyre inner side wall may have been damaged during the tyre/wheel balance identification process. In the worst case the tyre could deflate when the car is being driven. Fix: Examine tyre side walls and replace any tyres found to have been damaged as a result of the wheel balancing operation. | 288 |
| Aug 2002 | Ignition switch may failFault: Electrical contacts within the ignition switch wear prematurely. This can eventually cause the engine to stall without warning. Fix: Fit a new ignition switch. | 53,175 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my CR-V has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Honda CR-V had?
DVSA's recalls data lists 29 safety recalls covering the Honda CR-V, the most recent dated 31 March 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Honda CR-V?
See used Honda CR-V cars listed on the MotifyMe® marketplace.
See CR-V cars for sale