Mitsubishi L200 Recalls

Safety recalls covering the Mitsubishi L200 in DVSA's recalls data, newest first.

Last updated 22 November 2026

Short answer:

DVSA's recalls data lists 15 safety recalls covering the Mitsubishi L200, the most recent dated 10 July 2019. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Check a registration for outstanding recalls, free

15Recalls listed
10 July 2019Latest recall
1 July 2001Earliest listed
211,904Vehicles affected

Every Mitsubishi L200 recall

Open a recall to see the fault, the fix and the build dates it covers.

DateRecallVehicles affected
Jul 2019
Side step shade rivets may corrode and fracture

Fault: Corrosion of fixing rivets can lead to the side step shade becoming insecure

Fix: Change the 12 aluminium rivets to M8 bolts and nuts

Recall R/2019/193 · Dated 10 July 2019 · Built 23 April 2015 to 3 August 2016

10,564
May 2018
Door latching mechanism may malfunction in hot temperatures

Fault: The locking mechanism in the door latch assembly may not operate properly in high temperatures. As a result the door may not latch correctly and may unintentionally open whilst driving. This may affect one or more doors depending on vehicle identification number.

Fix: Modified assemblies are available and the remedy is to replace door latch mechanisms as identified by the manufacturer.

Recall R/2018/116 · Dated 26 May 2018 · Built 10 December 2015 to 5 July 2016

9,352
Nov 2016
Airbag may release shrapnel if deployed

Fault: Certain driver side airbags the inflator might release shrapnel from the inflator container during deployment which could injure the driver.

Fix: On affected vehicles replace air bag inflator.

Recall R/2016/251 · Dated 30 November 2016 · Built 5 November 2005 to 30 March 2015

87,398
Jul 2016
Indicators and/or other vehicle lights may switch off or blink without warning

Fault: Due to poor connectivity the indicators and/or vehicle lights may turn off or blink

Fix: On affected vehicles apply lubricant to switch connections

Recall R/2016/155 · Dated 28 July 2016 · Built 12 July 2005 to 14 October 2005

1,801
Dec 2013
Possible risk of fire

Fault: It is possible that a poorly soldered joint could cause a high resistance on the Door Entry Guard circuit board. This can cause a risk of fire.

Fix: Recall all affected vehicles to check unit and replace if required.

Recall R/2013/138 · Dated 3 December 2013 · Built 5 November 2011 to 23 September 2013

7,164
Dec 2013
In extreme cases fire may occur

Fault: Due to an incorrect shape of the power seat reclining lever the switch may get stuck. This causes current to flow through the reclining motor which heats up. In the worst case the cushion from the power seat and surrounding parts may be damaged due to heat generated from the reclining motor.

Fix: Recall the vehicles that are likely to be affected to replace the powered seat recliner levers and where necessary the adjuster assemblies.

Recall R/2013/132 · Dated 3 December 2013

3,133
Dec 2013
Vehicle may become unstable

Fault: Either side front lower suspension arm can be damaged or broken due to improper welding by the supplier. This could cause the vehicle to pull to either side or can be unstable during driving.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace any defective lower suspension arms.

Recall R/2013/134 · Dated 3 December 2013

5,461
Dec 2013
Fuel may leak

Fault: Poor welding may have occurred on the front prop shaft due to a manufacturing equipment failure on the supplier's production line. In the worst case the weld may break and the prop shaft may interfere with and damage the fuel line sufficiently for fuel to leak.

Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the propeller shaft.

Recall R/2013/133 · Dated 3 December 2013

220
Jun 2013
Engine may stall

Fault: As a result of incorrect mapping of the ECU and/or inappropriate design of the air flow sensor connector low engine performance poor idling or in the worst case engine stalling might be experienced.

Fix: Recall the vehicles that are likely to be affected to re programme the ECU and where necessary replace the air flow sensor.

Recall R/2013/054 · Dated 28 June 2013

8,263
Aug 2010
Top suspension ball joint may become detached

Fault: It has been established that is it possible due to misalignment of components that the ball joint mounting bolts may not have been torqued to the correct specification. If the vehicle is used in extreme circumstances this can cause the bolts to loosen and ultimately cause the ball joint to detach.

Fix: Recall affected vehicles to check the torque of the bolts and if required replace the top suspension arm.

Recall R/2010/082 · Dated 18 August 2010

29,750
Jul 2010
Rear protection bar may detach

Fault: It is possible that cracking can occur in the area of the welds on the mounting bracket to the tube of the rear under protection bar. This in extreme cases if not rectified could result in the detachment of the bar from the vehicle.

Fix: Recall the affected vehicles and replace the bar with a modified type.

Recall R/2010/042 · Dated 1 July 2010

590
Dec 2008
Rear axle may become insecure

Fault: It has been identified that due to an incorrect manufacturing process the U bolts used to secure the rear axle could break resulting initially in a rattling noise emanating from the rear axle. Should this be symptom be ignored insecurity of the rear axle could result.

Fix: Recalled vehicles will have the rear axle U bolts replaced with quality assured items.

Recall R/2008/128 · Dated 1 December 2008

20,445
May 2007
Fuel may leak

Fault: A crack may occur in the fuel filter water sensor which can lead to a leakage of fuel.

Fix: Recalled vehicles will have the fuel filter water sensor replaced.

Recall R/2007/035 · Dated 25 May 2007

7,917
Dec 2004
Possibility that the bonnet safety hook is defective

Fault: The possibility exists that the bonnet safety hook (secondary locking device) is defective. With the result that should the primary lock not be fully engaged the safety hook may also fail due to lift created by the airflow and in the worst case the bonnet may open whilst the vehicle is being driven.

Fix: Likely to be affected vehicles will be recalled at which time the safety hook bracket will be checked for profile and adjusted if necessary.

Recall R/2004/162 · Dated 3 December 2004

13,628
Jul 2001
Possible loss of steering control

Fault: Under severe and extreme conditions where the vehicle is used mainly off-road in a wet muddy environment it is possible that the tapered section of the ball pin on the steering 'Pitman arm' may break. This in the worst case could result in a loss of steering control.

Fix: Recall the affected vehicles and replacing the Pitman arm with a quality assured component.

Recall R/2000/084 · Dated 1 July 2001 · Built 1 January 1996 to 30 September 2000

6,218

Nothing matches that search on this page.

Vehicles affected is the number DVSA lists for each recall.

How to check a car for recalls

A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.

A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.

Frequently asked questions

How do I check if my L200 has an outstanding recall?

Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.

How many recalls has the Mitsubishi L200 had?

DVSA's recalls data lists 15 safety recalls covering the Mitsubishi L200, the most recent dated 10 July 2019. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Does a recall mean a car is unreliable?

No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

What should I do if my car is affected by a recall?

Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.

Where does this recall data come from?

From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.

Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.

Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.

Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.

Free vehicle check on WhatsApp

Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.

Open WhatsApp

How it works

Looking for a Mitsubishi L200?

See used Mitsubishi L200 cars listed on the MotifyMe® marketplace.

See L200 cars for sale