Volvo XC90 Recalls
Safety recalls covering the Volvo XC90 in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 43 safety recalls covering the Volvo XC90, the most recent dated 3 December 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Volvo XC90 recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Dec 2025 | Front SEAT beltsFault: On affected vehicles the front left seat bolts may not have been torqued according to specification which could reduce the occupant protection in an impact. Fix: Re-torque front seat bolts. | 1 |
| Jun 2025 | Bcm2 sw - safety noticeFault: Affected vehicles may experience a temporary loss of braking functionality after coasting downhill with 'B' mode selected or when using One Pedal Drive. This could potentially lead to a collision. Fix: Install modified software via an Over the Air (OTA) update. | 1,764 |
| Mar 2025 | Spa1 cell modulesFault: On affected vehicles the High Voltage (HV) Battery may have a manufacturing defect which could cause the battery cells to overheat when the HV Battery is fully charged. In a worst-case scenario there is a risk of fire when the vehicle is parked up with a fully charged HV Battery. Fix: Check and replace the HV Battery if necessary and install modified software. | 2,081 |
| Nov 2024 | Bcm2 - push roadFault: The rod connecting the brake pedal to the brake booster may not have been assembled correctly. The final torque might not be according to manufacturing specification due to deviations in the equipment. If the rod does disconnect the mechanical connection between brake pedal and brake booster cannot be guaranteed. In the worst-case scenario if the rod disconnects the brake pedal function cannot be guaranteed Fix: A Volvo retailer will check and if necessary tighten the rod to correct specification. | 1,028 |
| Mar 2024 | Seat and SEAT belt torqueFault: The screw joints for the seats and seat-belts may not have been torqued to the correct specification which means in the event of an impact insufficient protection will be available. Fix: The solution is to check and adjust the torque. | 4 |
| Dec 2023 | The anchorage bolts for the second-row SEAT belts and SEAT belt buckles may not have been correctly secured. in a worst-case scenario this may not provide sufficient protection in the event of a collision.Fault: The anchorage bolts for the second-row seat belts and seat belt buckles may not have been correctly secured. In a worst-case scenario this may not provide sufficient protection in the event of a collision Fix: Inspect and re-install. | 572 |
| Jan 2023 | There may be a potential software error in the brake control module.Fault: There may be a potential software error in the brake control module. Fix: Update the brake control module software. | 10,197 |
| Oct 2022 | A software error may prevent the engine control module from starting the engineFault: The Engine Control Module (ECM) may prevent the combustion engine from starting.� Fix: Download updated software. | 4,755 |
| Oct 2021 | Thrust bearing in turbo charger might not be robust enoughFault: The thrust bearing in the turbo charger may not be robust enough. Fix: Replace turbocharger with a modified version which has an improved thrust bearing. | 2,083 |
| Sep 2021 | Potentially insufficient or missing welding connection in the hydraulic unit of the brake systemFault: There may be an insufficient or missing welding connection in the Hydraulic Unit of the Brake System. Fix: Replace the Hydraulic Unit. | 28 |
| Jun 2021 | There is a risk that the 15amp fuse could blow which will prevent the low pressure fuel pump from operatingFault: There is a risk that the 15amp fuse could blow which will prevent the low pressure fuel pump operating. Fix: Replace the 15A fuse with a 20A fuse which can withstand this peak. | 14,380 |
| Jan 2021 | Vehicles may have the supplementary restraint system control unit incorrectly tightened to the car bodyFault: Vehicles may have the Supplementary Restraint System (SRS) control unit incorrectly tightened to the car body. Fix: Inspect and tighten the SRS control unit. | 704 |
| Mar 2020 | Software issue means that automatic emergency brake system may not engageFault: The Automatic Emergency Brake System a function of the IntelliSafe system may not always engage increasing the risk of a collision Fix: Affected vehicles must have new software downloaded | 56,385 |
| Dec 2019 | Possible loss of power whilst drivingFault: Possible loss of power whilst driving. Fix: Vehicles must have updated software downloaded. | 53 |
| Oct 2019 | The engine's plastic inlet manifold may melt and deformFault: The engines plastic inlet manifold may melt and deform Fix: Update vehicles with improved soot reducing software cleaning of TMAP and EMAP. Fit additional hoses where necessary. | Not stated |
| Apr 2019 | An engine cooling system hose may breakFault: An engine cooling system hose may break and could cause a coolant leak. Fix: Replace the hose on affected vehicles. | 959 |
| Jan 2019 | Small cracks on the inside of a rubber fuel hoseFault: Small cracks on the inside of a rubber fuel hose. Fix: Replacement of affected fuel hoses. | 30,777 |
| Nov 2018 | Possible software issue in the vehicle connectivity module (VCM)Fault: There may be a software issue in the Vehicle Connectivity Module. Fix: Upgrade software in the Vehicle Connectivity Module. | 7,322 |
| Jun 2017 | Rear passenger SEAT belt pre tensioner may not be to specificationFault: The pre-tensioner in the driver�s side third row passenger seat belt may not have been produced according to the correct specification In the event of a collision the pre tensioner and seat belt will still operate as intended but a very small part could enter the passenger compartment. As a temporary measure until the seat belt has been replaced it is recommended that the seat belt is not used. Fix: On affected vehicles replace the seat belt. | 501 |
| Mar 2017 | Retaining bolt for inflatable curtain may be brokenFault: The retaining bolts used to assemble the Inflatable Curtain may be broken and offer less protection in the event of an incident. Fix: On affected vehicles replace all retaining bolts. | 2,409 |
| Jan 2017 | One or more airbags may fail to deploy in the event of a collisionFault: It has been identified by the manufacturer that the air-bag initiator does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none deployment of the air-bag. Should a collision occur then there is an increased risk of injury to the occupants of the vehicle. Fix: Recall all affected vehicles to replace the air-bags with a new quality assured component. | 1,415 |
| Nov 2016 | Seatbelt may separate from the buckleFault: It has been identified there is a possibility the front seatbelt buckle stud may not have been punched correctly during production. This may result in a separation between the buckle and seatbelt bracket if the vehicle is involved in a collision. Fix: Recall all affected vehicles to inspect the seatbelt buckle and if required to replace the seatbelt buckle. | 47 |
| Oct 2015 | Engine may failFault: Affected vehicles may have a crankshaft that has been insufficiently hardened which may fail and nay cause engine failure. Fix: Check identity of crankshaft. If the relevant marking is not present then replace engine. | 9 |
| Aug 2015 | Third row passenger airbags may fail to deploy as intendedFault: Affected vehicles have interior panels that may prevent the inflatable curtain airbags from deploying as intended. This could reduce the level of protection offered to third row passengers in the event of an accident. Fix: Modify affected interior panels to allow the inflatable curtains to deploy as intended. | 1,690 |
| Jul 2015 | Loss of steering assistanceFault: A hose for the power steering assistance hydraulics could come into contact with the cooling fan. This would cause a noise which an observant driver may be able to hear. If the hose and fan conflict for long enough then it is possible for the hose to leak power steering fluid to the degree that servo assistance could be lost. Fix: Recall the vehicles that are likely to be affected and check the hydraulic hose for damage and relace as necessary. The hose will then be secured with a modified bracket. | 2,584 |
| Jun 2015 | Sips system may not deploy when requiredFault: It has been identified that the wiring harness for the Side Impact Protection System airbag (SIPS) on the drivers and passengers front seats may have been routed incorrectly. This could result in the wiring harness becoming damaged which will illuminate the Supplemental Restraint System (SRS) light on the instrument panel. If the SRS light is illuminated then additional care should be taken when driving the vehicle as SRS functions may be affected. Fix: Recall all affected vehicles to check the routing of the wiring harness and if required reroute it and repair any damage. | 301 |
| Apr 2012 | Engine may failFault: There could be a sudden and unexpected failure of the bottom end of the engine because of a non-conformity during production of the connecting rods. Fix: Recall the vehicles that are likely to be affected to replace the engine. | 6 |
| May 2011 | Power steering assistance could be lost and fluid may leakFault: A leak may occur from the internal pipes of the steering gear. In most cases the leak will be gradual and will drain the power steering oil generating noise and a slow decrease in the power steering assistance. In the worst case there could be a complete loss of power steering fluid and steering assistance without any warning to the driver. Fix: Recall the vehicles that are likely to be affected to replace the internal pipe set. | 4,992 |
| Oct 2010 | Wheel may become looseFault: It has been identified that the standard wheel securing bolts may not have undergone the correct hardening process. This will result in corrosion a noise and/or vibration. If this condition is not rectified there is a possibility that the wheel may become loose and detach. Fix: Recall all affected vehicles and replace the standard wheel bolts. | 186 |
| Jul 2010 | Fuel may leakFault: It has been identified that a number of fuel pressure pipes may have a defect which could result in a fuel leakage. Although it can be identified by the smell of fuel it is possible although unlikely that an external heat source could ignite the fuel so resulting in a fire. Fix: Recall affected for inspection of fuel pressure line and replacement if required. | 466 |
| Jun 2010 | Gearbox may jamFault: A section of the gear shift mechanism may over time become loose and cause the mechanism to become jammed. If this was to occur it might not be possible to change gear or select neutral. Fix: Recall the vehicles that are likely to be affected to check that the ball joint for the gear selector is properly secured. | 6,961 |
| Apr 2010 | Fire may occurFault: Fuel may leak from a defective fuel pressure line. Although unlikely there is a potential that an external ignition source could ignite the fuel and result in a fire in the driver's side wheel arch area. Fix: Recall the vehicles that are likely to be affected to inspect and where necessary replace the fuel pressure line. | 18 |
| Dec 2009 | Loss of power assistance to steeringFault: A power steering hose may come into contact with the engine cooling fan. As a consequence the hose may become damaged and subsequently leak resulting in loss of power steering assistance. Fix: Recall the vehicles that are likely to be affected to fit a new pipe clamp and where necessary a new power steering hose. | 6,501 |
| May 2008 | Vehicle may stallFault: It has been identified that; on assembly of the engine mounting bracket incorrect screws may have been used. This can result in breakage of the bracket which can lead to heavy engine vibrations/noise and reduced engine power or stalling due to the limp home mode being activated. Fix: Recalled vehicles will the engine mounting bracket screws replaced. | 13 |
| Mar 2008 | Steering power assistance may failFault: It has been identified thatthe steering gear pressure hose may become damaged due to conflict with the engine cooling fan. Should the hose come into contact with the cooling fan there could be a sudden draining of the hydraulic oil from the system and loss of steering power assistance. Fix: Recalled vehicles will have the steering pressure hose secured to avoid possible engine cooling fan contact. | 3,815 |
| Dec 2007 | Can-bus connection may be affectedFault: It has been identified that upon insertion of the ignition key the engine control module may transmit a signal to shut down the Can-Bus network thus disabling functions such as the climate control. Fix: Recalled vehicles will have the relevant software upgraded. | 245 |
| Mar 2007 | Fire may occurFault: The electric cooling fan control unit's metal cover may not have the correct corrosion protection. Should corrosion occur water may enter the control unit causing an electrical malfunction and in extreme cases cause a fire in the engine compartment. Fix: Recall the vehicles that are likely to be affected to fit an improved fan assembly. | 388 |
| Feb 2007 | Engine malfunction light may illuminateFault: On petrol engined vehicles it has been found that the PCV (Positive Crank Ventilation) nipple may crack or become loose resulting in an air leak. This could cause a whistling sound and may cause the engine malfunction lamp to operate. Fix: Recall the vehicles that are likely to be affected to replace the PCV nipple. | 1,139 |
| May 2006 | Steering may failFault: Under continuous exceptionally hard use it is possible for the track rod end ball joint to fracture. In extreme cases this could lead to loss of steering control. Fix: Recall the vehicles that are likely to be affected to replace both the nearside and the offside outer track rod ends. | 18,728 |
| Nov 2005 | Battery ground cable may short circuitFault: The battery positive cable may be in conflict with the starter motor solenoid. If a conflict does develop a short circuit of the battery ground cable will occur. This may result in smoke appearing from under the bonnet or a failure to start with warning lamps illuminated. Fix: Recalled vehicles will have the distance between the battery positive cable checked and adjusted if the clearance is less than 4mm. | 911 |
| Jan 2004 | Possible fuel leak from injector pipes.Fault: The fuel injector pipes may not have been fitted correctly and as a consequence could leak. Fix: Examine all potentially affected vehicles and replace any incorrectly fitted injector pipes. | 287 |
| Oct 2003 | Possible unintentional operation of ABSFault: There is a possibility that at certain temperatures (room temp or below) that the front wheel speed sensors can send faulty signals to a number of control units. It is possible that under braking the ABS could be activated when not needed and the ABS light will be illuminated. Fix: Recall affected vehicles and replace both front wheel sensors with modified type. | 429 |
| Oct 2003 | Possible incorrect fitting of SEAT belt attachmentsFault: There is a possibility that the seat belt attachments for the 2nd and 3d row may not have been fitted correctly. Some attachments may not have been tightened properly. Fix: Recall affected vehicles and inspect the attachments and if necessary replace the screws and tighten to correct specification | 1,546 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my XC90 has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Volvo XC90 had?
DVSA's recalls data lists 43 safety recalls covering the Volvo XC90, the most recent dated 3 December 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status
- ✓Send a photo of a number plate and we read the reg for you, then ask you to confirm it
- ✓Outstanding safety recall check, included in every lookup
- ✓Free valuation: add the mileage after the reg, for example 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Find a vehicle: for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send your question with the link to the vehicle on MotifyMe or its registration. Or search first, then reply ASK, the number of the vehicle and your question, for example ASK 2 is it still available. If we are not sure which vehicle you mean, we will ask
- ✓Fuel: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Volvo XC90?
See used Volvo XC90 cars listed on the MotifyMe® marketplace.
See XC90 cars for sale