Mercedes-Benz C-Class Recalls
Safety recalls covering the Mercedes-Benz C-Class in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 153 safety recalls covering the Mercedes-Benz C-Class, the most recent dated 8 September 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Mercedes-Benz C-Class recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Sep 2025 | Srpc2512 - bolting of steering couplingFault: Mercedes-Benz AG has determined that on certain C-Class (206 platform) GLC (254 platform) and EQE (295 platform) vehicles the bolting of the steering coupling might not meet specifications. Fix: As a remedy Mercedes-Benz AG via its Mercedes-Benz service partners will rework the bolting of the steering coupling on the affected vehicles. | 46 |
| May 2025 | Srpc2506 - driver SEAT belt fittingFault: Mercedes-Benz AG has determined that on certain C-Class (206 platform) vehicles the safety cap of the seatbelt end fitting on the driver seat might not be installed correctly. Fix: As a remedy Mercedes-Benz AG via its Mercedes-Benz service partners will check the safety cap of the seat belt end fitting on the affected vehicles and rework it if necessary. | 2 |
| Dec 2024 | Srpc2419 misfire detection m264Fault: The software of the engine control unit might not meet specifications regarding misfire detection. Fix: Mercedes-Benz AG via its Mercedes-Benz service partners will update the software of the engine control unit on the affected vehicles. | 1,147 |
| Aug 2024 | Srpc2410 - bolting connection pre-fuse boxFault: On affected vehicles the bolting of an electrical wire on the pre-fuse box in the passenger-side footwell might have not been tightened with sufficient torque. Fix: Check the bolting connection of the wiring harness to the pre-fuse box and repair if necessary. | 69 |
| Aug 2024 | Srpc2413 - screw connections of 12 v and 48 v ground pointsFault: On affected vehicles the bolts of certain 12V and 48V ground connections might be fastened with an insufficient torque. Fix: Check connections and repair if necessary. | 2 |
| May 2024 | Srpc2407 - battery pole coverFault: On affected vehicles the cover for a pole of the 12V battery might not be installed. Fix: Check whether the battery positive pole covers have been installed and if necessary install it. | 2 |
| Apr 2024 | Srpc2338 - rear-axle wiring harnessFault: On affected vehicles the rear-axle wiring harness might be pre-damaged due to a fixing which might not meet specifications. Fix: Check and replace the rear-axle wiring harness if necessary. | 1 |
| Mar 2024 | Srpc2401 - system protectionFault: On certain vehicles some 80A fuses installed might not meet requirements. Fix: Replace the respective main fuse boxes on the affected vehicles. | 958 |
| Feb 2024 | On affected vehicles the panel located between the windshield and the panoramic sunroof might not have been bonded correctly during a prior service repair.Fault: On affected vehicles the panel located between the windshield and the panoramic sunroof might not have been bonded correctly during a prior service repair. Fix: Check the front fixed element of the panoramic sliding sunroof and replace if necessary. | 45 |
| Nov 2023 | On affected vehicles the left brake hose on the rear axle might not have been installed according to specifications.Fault: On affected vehicles the left brake hose on the rear axle might not have been installed according to specifications. Fix: Check the brake hose and replace if necessary. | 1 |
| Nov 2023 | On affected vehicles the length of the transmission wiring harness might not meet specifications..Fault: On affected vehicles the length of the transmission wiring harness might not meet specifications. Fix: Check transmission wiring harness routing and rework if necessary. | 3 |
| Oct 2023 | Welding between fuel filler pipe and fuel tank might not meet specificationsFault: On affected vehicles the welding between fuel filler pipe and fuel tank might not meet specifications. Fix: Replace the fuel tank. | 3 |
| Sep 2023 | On affected vehicles the cable lug of the 48v ground connection in the engine compartment might not be fixed correctly.Fault: On affected vehicles the cable lug of the 48V ground connection in the engine compartment might not be fixed correctly.� Fix: Check the bolting of the ground connection on the affected vehicles and repair if necessary | 6,902 |
| Aug 2023 | On affected vehicles the fuel pump impeller might not meet specifications and may deform.Fault: On affected vehicles the fuel pump impeller might not meet specifications and may deform. Fix: Replace the fuel pump module. | 3,761 |
| Aug 2023 | Mercedes-benz ag has determined that on certain C-Class (206 platform) vehicles the bolts of certain 12v and 48v ground connections might be fastened with an insufficient torque.Fault: On affected vehicles the bolts of certain 12V and 48V ground connections might be fastened with an insufficient torque. Fix: Check the bolting of the ground connections and repair if necessary. | 75 |
| Aug 2023 | On affected vehicles the bolts of certain 12v and 48v ground connections might be fastened with an insufficient torque.Fault: On affected vehicles the bolts of certain 12V and 48V ground connections might be fastened with an insufficient torque. Fix: Check the bolting of the ground connections and repair if necessary. | 9 |
| Aug 2023 | On affected vehicles the bolts of certain 12v and 48v ground connections might be fastened with an insufficient torque.Fault: On affected vehicles the bolts of certain 12V and 48V ground connections might be fastened with an insufficient torque. Fix: Check the bolting of the ground connections and repair if necessary. | 173 |
| Jul 2023 | On affected vehicles the inflation of the front passenger airbag might not meet specifications.Fault: On affected vehicles the inflation of the front passenger airbag might not meet specifications. Fix: Replace the front passenger airbag. | 796 |
| Mar 2023 | On affected vehicles the bolting of the 48v ground connection in the engine compartment might not be sufficiently tightened.Fault: On affected vehicles the bolting of the 48V ground connection in the engine compartment might not be sufficiently tightened. Fix: Check the bolting of the ground connection and correct if necessary. | 2,674 |
| Feb 2023 | On affected vehicles the aluminium bolts of the steering gear could corrode and break due to the intrusion of moisture.Fault: On affected vehicles the aluminium bolts of the steering gear could corrode and break due to the intrusion of moisture. Fix: Replace the steering gear mounting bolts on the affected vehicles with steel bolts. Should the bolts break or already be broken change the steering gear. | 51,251 |
| Feb 2023 | On affected vehicles the bonding between the glass panel and the sliding roof frame might not meet specifications. in consequence a separation of the glass panel from the vehicle cannot be excluded.Fault: On affected vehicles the bonding between the glass panel and the sliding roof frame might not meet specifications. In consequence a separation of the glass panel from the vehicle cannot be excluded. Fix: Check the glass panel and replace the sliding roof if necessary. | 9,567 |
| Feb 2023 | The bonding between the glass panel and the sliding roof frame might not meet specifications.Fault: On affected vehicles the bonding between the glass panel and the sliding roof frame might not meet specifications. In consequence a separation of the glass panel from the vehicle cannot be excluded. Fix: Check the glass panel and replace the sliding roof if necessary. | 3,267 |
| Feb 2023 | The bonding between the glass panel and the sliding roof frame might not meet specificationsFault: On affected vehicles the bonding between the glass panel and the sliding roof frame might not meet specifications. In consequence a separation of the glass panel from the vehicle cannot be excluded. Fix: Check the glass panel and replace the sliding roof if necessary. | 16,535 |
| Nov 2022 | A weld seam of the supporting structure of the transmission connection may not correspond with the specificationsFault: A weld seam of the supporting structure of the transmission connection may not correspond with the specifications.� Fix: Check the transmission connection on the affected vehicles and replace it if necessary.� | 3 |
| Nov 2022 | The holding force of the fuel feed line may not correspond with the specificationsFault: The holding force of the fuel feed line may not correspond with the specifications. Fix: Check the fuel line on the affected vehicles and replace it if necessary. | 702 |
| Oct 2022 | Software of the communication module may not correspond with the specificationsFault: The software of the communication module may not correspond with the specifications. Fix: Update the software of the communication module in the affected vehicles. | 56 |
| Oct 2022 | Water ingress into the trunk and therefore moisture might enter into the signal acquisition and actuation moduleFault: Moisture may ingress into the signal acquisition module. Fix: Retro fit a cover to the signal acquisition module. | 1,564 |
| Sep 2022 | The engine control unit wiring harness might come in contact with the engine hoodFault: The engine control unit wiring harness might come in contact with the engine hood. Fix: Check the routing of the engine control unit wiring harness and correct it if necessary. | 4 |
| Aug 2022 | Vehicles might be equipped with an incorrect variant of the tyre pressure label in the tank flapFault: Vehicles might be equipped with an incorrect variant of the tyre pressure label in the tank flap. Fix: The tyre pressure label is to be replaced. | 2 |
| Jun 2022 | The passenger air bag may not deploy as specifiedFault: The passenger airbag may not deploy as specified. Fix: Replace the passenger airbag. | 109,809 |
| Jun 2022 | The passenger air bag may not deploy as specifiedFault: The passenger airbag may not deploy as specified. Fix: Replace the passenger airbag. | 25 |
| May 2022 | Individual bolts or chain links of the camshaft timing chain might wearFault: Individual bolts or chain links of the camshaft timing chain might wear in case of a long term operation under specific driving conditions. Fix: Replace the camshaft timing chain on the affected vehicles | 714 |
| May 2022 | The software of the rear signal acquisition and actuation module might not meet specificationsFault: The software of the rear signal acquisition and actuation module might not meet specifications. Fix: Update the software of the signal acquisition and actuation module on the affected vehicles. | 605 |
| May 2022 | One or more control unit vehicle configurations might not meet specificationsFault: Vehicles configurations were written into one or more control units that might not meet specifications. Fix: Update the configuration of the affected control units on the vehicles. | 3 |
| Apr 2022 | The overhead control panel might be deactivated permanently due to a software errorFault: The overhead control panel under certain circumstances might be deactivated permanently due to a software error. Fix: Update the software of the overhead control panel. | 6 |
| Mar 2022 | A particle in the fuel rail might lead to a leak between the fuel rail and the injectorFault: A particle in the fuel rail might lead to a leak between the fuel rail and the fuel injector.� Fix: Replace the fuel rail and fuel injectors on the affected vehicles.� | 26 |
| Mar 2022 | On certain vehicles the routing of an electric cable in the engine compartment might not meet specificationsFault: On certain vehicles the routing of an electric cable in the engine compartment might not meet specifications. Fix: Check the cable routing on the affected vehicles and correct it if necessary. | 6,322 |
| Mar 2022 | The software of the communication module might not meet specificationsFault: On certain vehicles the software of the communication module might not meet specifications. Fix: As a precautionary measure update the software of the communication module on the affected vehicles. This software update is planned to be performed over-the-air with no workshop visit being required. | 486 |
| Mar 2022 | The software of the communication module might not meet specificationsFault: On certain vehicles the software of the communication module might not meet specifications. Fix: As a precautionary measure update the software of the communication module on the affected vehicles. This software update is planned to be performed over-the-air with no workshop visit being required. | 63 |
| Feb 2022 | On certain vehicles the automatic transmission might have been filled with too much transmission oilFault: On certain vehicles the automatic transmission might have been filled with too much transmission oil. Fix: Check the oil level of the transmission on the affected vehicles and adjust it if necessary. | 1 |
| Feb 2022 | The configuration of the mbux system might not meet specificationsFault: On certain vehicles with an active and connected Mercedes me connect account the configuration of the MBUX system might not meet specifications. Fix: Update the configuration of the MBUX system on affected vehicles. | 5 |
| Feb 2022 | The software of the engine control unit might not meet specificationsFault: On certain vehicles the software of the engine control unit might not meet specifications. Fix: Conduct an update the software of the engine control unit on the affected vehicles. | 51 |
| Jan 2022 | Coolant pump might have a leakage between the vacuum system and the coolant circuitFault: On certain vehicles with a Diesel engine the coolant pump which is controlled by vacuum might have a leakage between the vacuum system and the coolant circuit. Fix: Update the software of the coolant pump and replace the electrical switch valve on the affected vehicles. | 35,624 |
| Jan 2022 | The configuration of the mbux system might not meet specifications.Fault: On certain vehicles with an active and connected Mercedes me connect account the configuration of the MBUX system might not meet specifications. Fix: A remote update of the configuration of the MBUX system will be conducted without the need for a workshop visit. | 25 |
| Dec 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 6 |
| Dec 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 23 |
| Dec 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 21 |
| Nov 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 50,390 |
| Nov 2021 | Takata airbag might not deploy as specifiedFault: Certain climatic conditions may cause a chemical change to the airbag propellants�over time.� Fix: Replace the driver and�passenger airbags.� | 85,613 |
| Nov 2021 | Takata airbag might not deploy as specifiedFault: Certain climatic conditions may cause a chemical change to the airbag propellants over time. Fix: Replace the driver and passenger airbags. | 56 |
| Nov 2021 | A nozzle inside the suction jet pump in the fuel tank might not have been installed or fixed inside the pump according to specificationsFault: A nozzle inside the suction jet pump in the fuel tank might not have been installed or fixed inside the pump according to specifications. Fix: Conduct a check of the fuel system on the affected vehicles and replace the fuel tank including the suction jet pump if necessary. | 88 |
| Sep 2021 | The belt tensioner arm may have been manufactured with borderline toleranceFault: The belt tensioner arm may have been manufactured with borderline tolerance. Fix: Replace the belt tensioner. Additionally check the v-ribbed belt on the affected vehicles and replace it if necessary. | 427 |
| Aug 2021 | Vehicles with a panoramic sunroofthe polycarbonate panel may not have been bonded correctly during a prior service repairFault: The polycarbonate panel located between the windshield and the panoramic sunroof may not have been bonded correctly during a prior service repair. Fix: Remove the bonded panel and install a new polycarbonate panel if required. | 61 |
| Aug 2021 | The driver's air bag may have a chemical change to its propellant over timeFault: The driver's airbag may have a chemical change to its propellant over time. Fix: Replace the driver�s airbag. | 108,486 |
| Jul 2021 | Diodes on the rectifier bridge of the alternator might failFault: Diodes on the rectifier bridge of the alternator might fail. Fix: Update the engine control unit software with an optimised alternator control strategy on the affected vehicles. | 18,050 |
| Jul 2021 | The fixation of the rear headrests might not meet specificationsFault: The fixation of the rear headrests might not meet specifications. Fix: Check the guide sleeves on the rear seats of the potentially affected vehicles and replace them if necessary. | 320 |
| Jul 2021 | The bolting of the high voltage battery to the vehicle body in the luggage compartment might not meet specificationsFault: The bolting of the high-voltage battery to the vehicle body in the luggage compartment might not meet specifications. Fix: Check the bolting of the high-voltage battery to the vehicle body on the affected vehicles and rework if necessary. | 5 |
| May 2021 | The bonding between the glass panel and the sliding roof frame might not meet specificationsFault: The bonding between the glass panel and the sliding roof frame might not meet specifications. Fix: Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary. | 310 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 108,971 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 86,604 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 90,716 |
| May 2021 | The connection of the gas lines of the inertisation system might not meet specificationsFault: The connection of the gas lines of the inertisation system might not meet specifications. Fix: Check and if necessary rework the gas lines of the inertisation system. | 29,137 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 10,410 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 162,581 |
| May 2021 | The emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 106,665 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 81,267 |
| May 2021 | The emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 6 |
| Mar 2021 | The communication module may be deactivatedFault: The communication module may be deactivated Fix: Carry out a check of the configuration of the communication module on affected vehicles and if necessary activate the communication module. | 24 |
| Mar 2021 | The software of certain communication modules may not meet specificationsFault: The software of certain communication modules may not meet specifications. Fix: Carry out an update to the software of the communication module on affected vehicles. | 36 |
| Dec 2020 | The high voltage wiring harness shield may not permanently withstand the electrical loads that are induced under certain driving profilesFault: The shield for the high-voltage wiring harness may not permanently withstand the electrical loads that are induced under certain driving profiles Fix: Replace the high-voltage wiring harness on the affected vehicles | 2,377 |
| Dec 2020 | The wiring harness of the steering control unit may not have been manufactured to specificationFault: The wiring harness of the steering control unit might not have been manufactured according to specification. Fix: Check the wiring harness of the steering control unit on the affected vehicles and replace it if necessary. | 3,029 |
| Nov 2020 | The headlight adjustment may not meet the specificationFault: The headlight adjustment might not meet the specification Fix: Check the headlight adjustment on the affected vehicles and correct it if necessary. | 160 |
| Oct 2020 | The software of the ESP control unit may not meet the specificationsFault: The software of the ESP control unit might not meet the specifications. Fix: Update the software for the ESP control unit on the affected vehicles. | 1,061 |
| Oct 2020 | The emergency call system (ECALL) does not meet the specificationFault: On affected vehicles the software of the communication module for the emergency call system does not meet the specification Fix: Update the software of the communication module for the emergency call system | 3,127 |
| Oct 2020 | The SEAT belt warning function does not meet the specificationFault: The seat belt warning function does not meet the specification Fix: Activate the correct seat belt warning scenario in the instrument cluster | 45 |
| Oct 2020 | Engine control unit software to be updatedFault: Improve the vehicle emissions via software updates. Fix: Update the relevant control unit�s software and if necessary replace the NOx sensors. | 994 |
| Oct 2020 | Certain specific calibrations of functions must be changed in the engine managementFault: Certain specific calibrations of functions must be changed in the engine management of the vehicles Fix: Update the diesel engine control unit software | 23,302 |
| Sep 2020 | The engine control unit software nay not meet specificationsFault: The engine control unit software might not meet the specifications. Fix: Update the diesel engine control unit software on the affected vehicles. | 1,258 |
| Aug 2020 | The data documenting the correct mounting of the turbocharger oil feed as well as the oil return line may be missingFault: The HV battery pack can overheat and result in the venting of hot gas which can ignite vehicle components or in extreme cases the entire vehicle. Fix: To prevent a vehicle fire the vehicles should not be charged using the external charging cable and the vehicles should only be driven using the default Auto EV mode only | 248 |
| Aug 2020 | The left rear SEAT backrest lock may not meet specificationsFault: The left rear seat backrest lock might not meet the specifications Fix: Replace the left rear seat backrest lock on the affected vehicles. | 1,179 |
| Aug 2020 | Certain front SEAT belt buckles may not have been manufactured according to specificationFault: A correctly fastened seat belt could be detected as not fastened impairing the restraint system Fix: Check the relevant seat belt buckles in the affected vehicles and replace if necessary | 15,652 |
| Jul 2020 | The dimension of the brake discs on the front axle may be too smallFault: The dimension of the brake discs installed on the front axle might be too small. Fix: Replace the brake discs on the affected vehicles. | 4 |
| Jul 2020 | The heat shield installed at the turbocharger may not meet the specificationFault: The heat shield installed at the turbocharger may not meet the specification Fix: Replace the heat shield on the affected vehicles | 27 |
| May 2020 | The bonding between the glass panel and the sliding roof frame may not meet specificationsFault: The bonding between the glass panel and the sliding roof frame might not meet specifications Fix: Check the glass panel bonding on the affected vehicles and replace the sliding roof if necessary | 18,132 |
| Mar 2020 | The spring damper software may not meet specificationsFault: The spring damper software might not meet specification affecting level sensors and headlight range. Fix: Replace the spring damper control unit on affected vehicles. | 1 |
| Nov 2019 | The tie rod may not be correctly mounted to the right front axle stubFault: The mechanical connection between tie rod and right front axle stub might not be ensured. Fix: Replace the tie rod of the right front axle on the affected vehicles. | 11 |
| Sep 2019 | The software of the radar control unit may not meet specificationFault: ; The software of the radar control unit might not meet the specification Fix: Update the software of the radar sensor control unit on the affected vehicles. | 294 |
| Sep 2019 | The crankshaft may exhibit surface damagesFault: The durability of the crankshaft might be impaired. Fix: Replace the engine on affected vehicles. | 35 |
| Jun 2019 | The mounting bolts of the turbocharger oil return line and the crank case ventilation line might have been interchangedFault: The mounting bolts of the turbocharger oil return line might have been interchanged Fix: Replace the mounting bolts | 18 |
| May 2019 | Software update to improve emissionsFault: Improve the vehicle emissions via software updates. Fix: Update the diesel engine control unit software and add a supplementary booklet for the operator's manual. | 7,546 |
| May 2019 | An internal sensor within the electric power steering unit may not have been manufactured to specificationsFault: An internal sensor within the electric power steering unit might not have been manufactured according to specifications. Fix: The affected vehicles are to have the steering unit replaced. | 32 |
| May 2019 | Switches in certain SEAT belt buckles may not have been manufactured to specificationsFault: The switches in certain seat belt buckles might not have been manufactured according to specifications. Fix: The affected seat belt buckles are to be replaced. | 2,570 |
| Apr 2019 | A reset in the cpc control unit could occur whilst drivingFault: The ECO Start-Stop function may be disabled and cause the vehicle to stall. Fix: The affected vehicles are to be recalled and the software updated. | 69 |
| Apr 2019 | A lock nut may be cracked in the steering gearFault: A lock nut may be cracked in the steering gear. Fix: The electric power steering is to be checked and if necessary replaced. | 6,684 |
| Apr 2019 | A lock nut may be cracked in the steering gearFault: A lock nut may be cracked in the steering gear. Fix: The electric power steering is to be checked and if necessary replaced. | 24 |
| Mar 2019 | The electronic stability program control unit software may not match the current specificationFault: The ESP control unit may not be initialised as intended during the start-up process. Fix: The affected vehicles are to be recalled and ESP control unit software updated. | 11,788 |
| Mar 2019 | The status of the front passenger airbags displayed in the centre console might not be indicated correctlyFault: The status of the front passenger airbags displayed in the centre console might not be indicated correctly. Fix: The affected vehicles head unit software will be updated | 36,643 |
| Jan 2019 | The lock status of the steering coupling was not correctly documentedFault: The lock status of the steering coupling was not correctly documented following assembly. Fix: As a precautionary measure on affected vehicles the lock status of the steering coupling will be determined and reworked if necessary. | 4 |
| Oct 2018 | To improve emissions of the affected vehicles.certain calibrations of functionalities must be changed in the engine managementFault: Improve the vehicle emissions via software updates. Fix: Update the diesel engine control unit software and add a supplementary booklet for the operator's manual | 15,692 |
| Oct 2018 | An electric line in the engine compartment may have been routed outside of the specificationFault: An electric line in the engine compartment may have been routed outside of the specification. Fix: Check the routing of the wiring harness at the prefuse box in the engine compartment and correct if necessary. | 8,562 |
| Oct 2018 | Bonding of the rear beltline trim strips may not be to specificationFault: Bonding of the rear beltline trim strips may not correspond to the specifications. Fix: Check the trim strips of the affected vehicles and replace them if necessary. | 7,800 |
| Aug 2018 | Incorrect underfloor panelling installedFault: Incorrect engine undertray fitted. Fix: Check and replace engine undertray on affected vehicles. | 15 |
| Aug 2018 | Laser welding between backrest rail and backrest metal fitting of front seats may not meet specificationFault: It has been determined that on certain C-Class (205) and E-Class (213) Cars with AMG performance seats the laser welding between the backrest rail and the backrest metal fitting of the driver or passenger seat might not meet the specification. The laser welding between the backrest member and the backrest metal fitting may not withstand the required load values. As a result the fitting may detach from the backrest member. In the case of an accident this could result in a higher occupant load. Due to the delivery scenario the fault can only occur on one side of the seat. Fix: As a precautionary measure recall the affected vehicles and check the backrest member and replace if necessary | 46 |
| Aug 2018 | Driver's airbag gas generator housing failure during deploymentFault: On affected vehicles it has been determined that drivers airbags with potentially faulty gas generator housing material may have been installed in vehicles of model series 156 176 246 205 238 & 253. If the material of the gas generator housing fails during airbag deployment in the event of a crash the airbag system would possibly no longer have a restraint effect. In addition separating parts could enter the passenger compartment. This could lead to an increased risk of injury. Fix: On affected vehicles replace the driver�s airbag | 421 |
| Aug 2018 | Incorrect software specification for the steering column switch moduleFault: Software of switch module incorrect specification Fix: Update software of affected vehicles | 6 |
| Jul 2018 | Right side of front SEAT backrests may not lock into placeFault: The seat backrests on the right side of the front seats in the c-class Coupe/Convertible and E-Class Coupe/Convertible may not fully lock. Fix: As a precautionary measure the lock of the seat backrest on affected vehicles will be check for operation. Where necessary the backrest will be replaced. | 21,366 |
| Jul 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy Fix: .Affected vehicles will be recalled to be checked to ensure there is sufficient grounding of the steering components. | 10,113 |
| Jun 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components | 78,608 |
| Jun 2018 | Airbag control unit connection may not be manufactured to specificationFault: The connector pins of the occupant classification system to the airbag control unit might have been manufactured outside specification. After a period of time this may cause decativation of the passnger airbag. Fix: On affected vehicles replace the connector pins of the occupant classification system. | 100 |
| May 2018 | Steering components may be insufficiently groundedFault: It has been determined that the steering airbag electrical components are insufficiently grounded. Failure of the steering column module clock spring could result in an inadvertent deployment of the driver airbag which may cause risk of injury to the driver and an increased risk of a potential collision. Fix: On affected vehicles the manufacturer will fit a contact bridge to the outer race of the steering column top bearing which will provide correct grounding. | 74,329 |
| Apr 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 67,027 |
| Apr 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 51,528 |
| Feb 2018 | Front SEAT belt tensioners may not functionFault: The front seatbelt pre-tensioner ignitors may not perform as expected. This could increase the risk of injury to the seat occupants. The lock function of the seatbelts is not impaired. Fix: On affected vehicles replace seatbelts with quality assured units. | 296 |
| Feb 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 84,879 |
| Dec 2017 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 46,093 |
| Nov 2017 | Axle mounting may breakFault: Under extreme starting conditions (such as full throttle) on wet road surfaces AND with repeated short term rear wheel spin strong torque peaks in the powertrain may occur.This may cause an axle mounting flange to break and possible loss of drive. Fix: On affected vehicles update the ESP and chassis control units. | 1,511 |
| Oct 2017 | Right front SEAT belt pre-tensioner may not meet specificationFault: The right front seat belt pretensioner may not conform to specification . This may adversely affect it's operation in the event of an accident. Fix: Replace the pretensioner on affected vehicles. | 135 |
| Sep 2017 | Left front SEAT belt pre-tensioner may not meet specificationFault: The propellant mix in certain seatbelt pre-tensioners ignitors may be incorrect. If the front seatbelt pre-tensioners are deployed the lock function of the pre-tensioners cannot be guaranteed. Fix: Recall the vehicles that are likely to be affected and replace the front seatbelts that are likely to be affected. | 78 |
| Jun 2017 | Starting current limiter may overloadFault: Where the car incurs severe engine damage resulting in the engine failing to turn over (engine seizure) and if the driver repeatedly attempts to start the engine despite the engine not cranking the very high electrical current could lead to overheating of the starting current limiter and the potential for a fire. Fix: Recall the vehicles that are likely to be affected and install an additional fuse in the electrical line to the starter. | 74,444 |
| Jun 2017 | Electric power steering motor defectiveFault: Contacts inside the electric power steering motor may not have been correctly formed. Failure of these contacts would cause the loss of power steering assistance.If this happens a warning lamp will illuminate Fix: Replace the electric power steering motor on affected vehicles. | 16 |
| Apr 2017 | Steering coupling may become looseFault: The threaded connection for the steering column coupling to the steering rack pinion may not be tightened correctly. Overtime time the connection could loosen and fall out allowing a situation where the steering control could be lost. Fix: Recall the vehicles that are likely to be affected and check the tightness of the threaded connection for the steering column coupling. Where necessary the joint will be removed and inspected. If not serviceable it will be replaced. A new threaded connection will be used where the tightness is not correct. | 7 |
| Apr 2017 | Faulty control unit may cause vehicle to perform outside specificationFault: Where a control unit coding was updated in a workshop between 3 December 2016 and 5 December 2016 the coding may not correspond to the specification and may trigger unplanned action in the vehicle. The safety and emissions systems may not react as design intent. Fix: Recall the vehicles that are likely to be affected and update the software in the corresponding control units. | 42 |
| Feb 2017 | Loss of power steering supportFault: It has been identified that the pins within the electric power assisted steering control unit may not have been contact welded correctly. This can result in an open circuit which will lead to a loss of power steering assistance and possible loss of control of the vehicle. Fix: Recall all affected vehicles and replace electric power assisted steering. | 14 |
| Jan 2017 | Flammable vapour may igniteFault: The threaded connection on the Adblue filler pipe and ground cable for the fuel tank access may not be correctly tightened on vehicles with diesel engine OM651. It is possible for the connection to work loose and fail thereby causing the possibility of an electrostatic discharge. In extreme conditions there is a possibility of fire. Fix: Recall the vehicles that are likely to be affected to check and where necessary correct the connection of the Adblue filler pipe and ground cable. | 5 |
| Sep 2016 | Fuel may leakFault: A high pressure fuel line to the fuel pump may work looses and allow diesel to leak Fix: On affected vehicles replace fuel line | 3,591 |
| Apr 2016 | 1. airbags may fail to deploy or 2. airbags may deploy without obvious causeFault: Due to corrosion of internal components the SRS control unit may fail. This will deactivate SRS components such as airbags or in rare instances cause an SRS component to unintentionally deploy. Fix: On affected vehicles replace the SRS control Unit. | 31,091 |
| Mar 2016 | Risk of fireFault: The threaded connection of the battery ground may not be tightened correctly due to deviation in the tightening angle monitoring. In the event of a poor ground of the battery line a temporarily higher transition resistance could lead to the formation of sparks and local heating. This would increase the risk of fire. Fix: Recall the vehicles that are likely to be affected and check the ground connection of the battery line and if necessary replace the ground connection. | 27 |
| Jan 2016 | Risk of fireFault: The high pressure fuel lines have not been manufactured to the correct specification which over time can lead to crack formation and fuel leaking. Fuel escaping in the presence of an ignition source could lead to fire. Fix: Recall the vehicles that are likely to be affected and replace the high pressure fuel lines. | 1,327 |
| Nov 2015 | Engine may failFault: The camshaft could break and damage the engine due to it not being manufactured to the correct specification. If the condition occurs it will lead to a sudden loss of drive thereby increasing the risk of a collision. Fix: Recall the vehicles that are likely to be affected and replace the exhaust camshaft. | 395 |
| Sep 2015 | Oil may leakFault: On affected vehicles the transmission oil cooler return pipe may not have been mounted correctly. It is possible vibration may cause the pipe to fail and leak oil. Fix: Correctly mount oil cooler pipes. | 5,389 |
| Jul 2015 | Front seats may not be secured acording to specificationFault: The threaded connections to the rear of the front seats may not have been tightened correctly. In the case of a serious vehicle accident the seat connection may not function as designed resulting in an elevated risk of injury to the occupants. Fix: Recall the vehicles that are likely to be affected to check and where necessary correct the torque of the connections at the rear of the front seats. | 10 |
| Jul 2015 | Passenger airbag may not function as intendedFault: On affected vehicles a control unit under the front passenger seat may not have been correctly installed. This may adversely affect the seat occupancy recognition system.The seat occupancy recognition system may not correctly identify seat occupancy and may incorrectly activate or deactivate the air bag. Activation status will be notified by the passenger air bag warning system. Fix: Check control unit installation and correct if necessary. Where necessary replace passenger seat cushion. | 11 |
| Jul 2015 | Side restraint system may not function as intendedFault: The threaded connection of the crash sensors at the B-pillars may not be to specification. There is a possibility that the side restraint system may trigger too late or not at all in the event of a side impact which may pose an increased risk of injury for the vehicle occupants. Fix: Recall the vehicles that are likely to be affected to check and where necessary correct the threaded connection of the crash sensors at both the left and right B-pillars. | 3 |
| May 2015 | Engine may stallFault: It is possible on certain petrol (gasoline) vehicles that the mounting hooks for the jet pump may not have been manufactured to specification. The jet pump is mounted on top of the fuel delivery module in the fuel tank and if the mounting hooks were to fail it will result in the jet pump detaching from the module and a possible fall in fuel pressure. This fall in fuel pressure could either result in the engine not starting or in worst cases causing the engine to cut out or stall. This could affect the drivers ability to control the vehicle. Fix: Recall all likely to be affected vehicles to install an additional clip to the jet pump. | 1,364 |
| May 2015 | Vehicle may shut downFault: Due to a software code error it is possible that the 1.6ltr 4 cylinder diesel engines may suffer a stalling situation during the warm-up phase and where the engine is subjected to high load requirements. However if the engine does stall it can be immediately restarted and the vehicle can be driven without restrictions. Furthermore all safety systems remain fully functional. Fix: Recall all affected vehicles to update the engine control unit software. | 437 |
| Jan 2015 | Oil may leakFault: On certain diesel engines the 'O' ring may not have been produced to the correct specification. This may allow oil to leak and contaminate the environment. If excessive oil is lost engine damage may occur. Fix: On affected vehicles replace the chain tensioner sealing ring. | 61,672 |
| Sep 2014 | Steering control may be affectedFault: It is possible that the steering column coupling lock may not have been installed correctly. The driver will recieve warning of the issue by noise. However in extreme circumstances it is possible that steering control of the vehicle could be affected. Fix: Recall all affected vehicles to check and if required replace the steering coupling. | 8,140 |
| Mar 2013 | Fuel may leakFault: The flange of the fuel filter may leak due to a non-compliance in the supplier's production process. Should this occur a fuel odour may arise or fuel escape. Fix: Recall the vehicles that are likely to be affected to replace the fuel filter. | 806 |
| Jan 2013 | Engine may cut outFault: Cracks in the charge air hose may possibly occur. This may subsequently lead to the engine switching to limp-home mode. In rare individual cases the engine shutting off cannot be ruled out. Fix: Recall the vehicles that are likely to be affected to replace the charge air hose. | 6,090 |
| Jan 2012 | Fuel may leakFault: Fuel leaks in the plug area of the drain opening may occur at the fuel filter with integrated fuel heaters. Fuel can escape and is noticeable to the customer due to a corresponding diesel odour. The diesel can reach the road and as a result friction between the tyres and road surface may be decreased. Fix: Check filter and replace as necessary. | 44,596 |
| Jan 2011 | Fuel may leakFault: Fuel may leak from the fuel filter housing onto the road surface and thereby make the road slippery for road users. Fix: Recall the vehicles that are likely to be affected to replace the fuel filter housing if it is leaking. | 2,972 |
| Nov 2010 | Brake system may not operate to specificationFault: Some vehicles may have been fitted with incorrect specification brake discs. This in extreme cases may have an affect on the brake efficiency should the vehicle have to carry out an emergency stop. Fix: Recall all affected vehicles for the replacement of the rear brake discs. | 4 |
| Oct 2010 | Power assisted steering may leak oil.Fault: It is possible that a power assisted steering fluid leak could occur on the connection from the connection on the fluid line to pump. Drivers should be made aware of the concern by noise being emitted whilst the vehicle is being driven. Fix: Recall all affected to check the connection and if required replace the sealing ring. | 22,586 |
| Nov 2008 | Driving stability may be affectedFault: It has been identified that during production or a repair faulty Active Body Control (ABC) acceleration sensors may have been fitted. This has the potential to cause vibrations at the front axle thus influencing the driving stability and operational safety. Fix: Recalled vehicles will have the ABC acceleration sensor checked and replaced as necessary. | 256 |
| Nov 2008 | Engine could lose power.Fault: The electrical connection in the interior of the crankshaft sensor's chip housing may be interrupted which may result in loss of power and the inability to restart engine Fix: Recall affected vehicles and replace crankshaft sensor | 19,331 |
| Nov 2008 | Engine emergency shut off on board diagnosis or tank/speedo signal may be affectedFault: Possibility of transfer of incorrect control unit software which could affect engine shut off control in an emergency situation or the on board diagnosis system or tank/speedometer signal Fix: Recall affected vehicles and replace SAM control unit | 72 |
| Dec 2006 | Engine may cut outFault: A fuse within an electronic control module may become loose. This can result in the vehicle failing to start. In the worst case the engine may cut out whilst the vehicle is being driven. Fix: Recalled vehicles will have the subject module replaced. | 29 |
| Jan 2006 | Engine may revert to limp home modeFault: The differential pressure sensor for the diesel particulate filter can fail due to contamination of the protective gel layer by exhaust gases. This will result in the car reverting to limp home mode (restricted engine speed). Fix: Replace the differential pressure sensor with the latest modified type. | 4,869 |
| Jan 2004 | Rear SEAT belts may not engage correctlyFault: Rear Seat Belt may not engage correctly Fix: Recall affected vehicles and replace seat belt buckle | 4,372 |
| Nov 2003 | Bonnet could open without warningFault: It is possible that due to a previous minor collision which the driver may have considered insignificant the bonnet securing hook may have been damaged which could result in the opening of the bonnet if it has not been closed correctly. Fix: Recall all affected vehicles for the replacement of the hook with a modified hook. | 2 |
| Sep 2003 | Possible loss of steering controlFault: It is possible that the steering coupling at the union with the steering gear may not be correctly positioned and/or sufficiently torqued. This could lead to the steering gear becoming detached from the steering column with subsequent loss of steering control. Fix: Check the position of the steering coupling and the fasteners for correct torque. | 16 |
| May 2001 | Unintentional deployment of air bagFault: Exposure to high humidity conditions may result in corrosion that can cause the drivers front air bag to deploy unintentionally. Fix: Recall affected vehicles and replace air bag. | 7,041 |
| Apr 2001 | Exhaust pipe may breakFault: There is a possibility that the end part of the exhaust pipe could break off at the welding seam to the rear of the muffler. Hot exhaust gases could in isolated cases cause the risk of substantial consequential heat damage in the rear region of the vehicle. Fix: Recall affected vehicles and replace rear exhaust section with a stainless steel version if not already replaced due to regular muffler wear. | 7,213 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my C-Class has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Mercedes-Benz C-Class had?
DVSA's recalls data lists 153 safety recalls covering the Mercedes-Benz C-Class, the most recent dated 8 September 2025. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Mercedes-Benz C-Class?
See used Mercedes-Benz C-Class cars listed on the MotifyMe® marketplace.
See C-Class cars for sale