Peugeot 208 Recalls

Safety recalls covering the Peugeot 208 in DVSA's recalls data, newest first.

Last updated 22 November 2026

Short answer:

DVSA's recalls data lists 57 safety recalls covering the Peugeot 208, the most recent dated 5 October 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Check a registration for outstanding recalls, free

57Recalls listed
5 October 2026Latest recall
16 July 2012Earliest listed
212,159Vehicles affected

Every Peugeot 208 recall

Open a recall to see the fault, the fix and the build dates it covers.

DateRecallVehicles affected
Oct 2026
Peugeot 208 wrong coolant liquid filled

Fault: On affected vehicles the coolant used does not meet material and technical compatibility requirements. Over time this may cause corrosion clogging deterioration of hoses and seals and coolant leakage resulting in reduced vehicle performance loss of propulsion assistance or an electrical short-circuit.

Fix: Drain the cooling circuit and re-fill with the correct coolant liquid.

Recall R/2026/390 · Dated 5 October 2026 · Built 17 February 2026 to 5 March 2026

349
Jun 2026
Peugeot 208 horn sound volume

Fault: Affected vehicle have a horn volume which does not comply with regulatory requirements.

Fix: Replace the horn with one of a higher volume.

Recall R/2026/231 · Dated 4 June 2026 · Built 1 September 2019 to 25 July 2022

41,085
May 2026
Front lower control arm fasteningg loose

Fault: On affected vehicles the front suspension lower control arm upper bolts may not have been tightened according to specification during assembly.

Fix: Check the bolts for the correct torque and replace if necessary.

Recall R/2026/206 · Dated 19 May 2026 · Built 8 July 2025 to 9 September 2025

1,761
Apr 2026
Bcm software missing telltale if lka unavailable

Fault: On affected vehicles the Lane Keep Assist tell-tale fails to illuminate if the front camera is blocked meaning no warning light appears in the instrument cluster.

Fix: Update the Body Control Module software.

Recall R/2026/183 · Dated 27 April 2026 · Built 11 April 2024 to 9 April 2025

11,325
Mar 2026
Alternator protection

Fault: Affected vehicles may have been assembled with contact or with a reduced clearance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator. There is a possibility of contact between these components leading to water infiltration and an electrical arch which could trigger a thermal event.

Fix: Replace the pole protection cap of the 48V Belt Starter Generator. Check the distance between the Gasoline Particulate Filter pipe and the pole protection cap of the 48V Belt Starter Generator and re‑position or replace the pipe if required.

Recall R/2026/071 · Dated 9 March 2026 · Built 7 June 2023 to 21 January 2026

13,345
Aug 2025
Emission recall - on board diagnostics

Fault: Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations.

Fix: Update the Engine Control Unit software to ensure compliance to regulations.

Recall R/2025/344 · Dated 18 August 2025 · Built 7 November 2017 to 2 October 2020

126
Jul 2025
Peugeot fuel pipe

Fault: On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire.

Fix: Retighten the affected connections.

Recall R/2025/277 · Dated 18 July 2025 · Built 11 April 2023 to 22 April 2025

6,568
Jul 2025
Peugeot dv5r engines camshaft chain.

Fault: Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case.

Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives.

Recall R/2025/246 · Dated 3 July 2025 · Built 16 April 2019 to 31 January 2023

2,251
Jun 2025
Autonomous telematics box

Fault: On affected vehicles the Autonomous Telematics Box (ATB) has no connectivity to the Connected Services features and therefore does not comply with regulatory requirements.

Fix: Replace the ATB to ensure compliance with regulatory requirements.

Recall R/2025/210 · Dated 11 June 2025 · Built 27 July 2024 to 29 September 2024

1
May 2025
Peugeot 208 - fuel tank

Fault: On affected vehicles there may be a defect present in the fuel tank threads which could potentially lead to a fuel leak.

Fix: Check the blown-molding engraved date marking date at the bottom of the fuel tank and replace the lock nut and O-ring if necessary.

Recall R/2025/189 · Dated 28 May 2025 · Built 26 June 2023 to 8 April 2025

740
Apr 2025
Brake pressure modulator valve

Fault: On affected vehicles the Electronic Brake System Module is not according to specification which could potentially lead to light internal leakage of brake fluid.

Fix: Replace the Electronic Brake System Module.

Recall R/2025/148 · Dated 14 April 2025 · Built 27 May 2024 to 6 June 2024

20
Mar 2025
Traction battery software

Fault: Affected vehicles may face an error in the Battery Monitoring Unit software.

Fix: Update the Battery Monitoring Unit software.

Recall R/2025/120 · Dated 24 March 2025 · Built 26 July 2022 to 30 November 2022

889
Feb 2025
Autonomous telematics box failure after ota update.

Fault: Affected vehicles may have been equipped with an Autonomous Telematic Box (ATB) which does not work.

Fix: Change the ATB.

Recall R/2025/086 · Dated 27 February 2025 · Built 21 March 2024 to 14 September 2024

4
Feb 2025
Peugeot 208 - jet cooling nozzle failure

Fault: On affected vehicles the engine is at risk of becoming damaged because of an inadequate oil supply from an oil jet cooling nozzle.

Fix: Replace the engine oil and filter.

Recall R/2025/073 · Dated 19 February 2025 · Built 7 October 2022 to 3 December 2024

879
Feb 2025
Peugeot automomous telematics box.

Fault: Affected vehicles may experience an autonomous telematic box that cannot connect to the remote server making it not possible to make calls or use other connected services.

Fix: Disconnect the 12V battery and reconnect it after 15 seconds then check for a trouble code.

Recall R/2025/069 · Dated 14 February 2025 · Built 9 April 2024 to 8 November 2024

2
Feb 2025
Peugeot 208308 evcu update

Fault: Affected vehicles may not comply with test requirements in the matter of emissions test execution by competent authorities and energy consumption may be too high.

Fix: Update the electrical Vehicle Control Unit (eVCU) software.

Recall R/2025/045 · Dated 7 February 2025 · Built 6 July 2023 to 7 March 2024

232
Dec 2024
Peugeot - cross carline radio software via ota update

Fault: On affected vehicles the Advanced Driver Assistance System (ADAS) functionality may not meet regulatory requirements and the Active Emergency Brake (AEB) and Lane Keep Assist (LKA) can inadvertently be deactivated by a long press of the ADAS button on the radio.

Fix: On the affected vehicles the radio software will be updated by an Over-The-Air update which will be remotely checked as successfully installed.

Recall R/2024/485 · Dated 6 December 2024 · Built 26 June 2023 to 30 May 2024

2,993
Nov 2024
Peugeot 208 p21 camera video module software

Fault: On affected vehicles there may be a reduced alert time of 3 seconds instead of the regulatory requirement of 10 seconds to warn the driver that the Advanced Emergency Braking (AEB) is unavailable following an emergency braking event occurring.

Fix: On the affected vehicles the camera video module software and calibration will be updated.

Recall R/2024/444 · Dated 1 November 2024 · Built 31 August 2023 to 21 March 2024

568
Jul 2024
Peugeot 208 - evaporation test results on eb2fa engines.

Fault: Affected vehicles may exceed regulatory emission standards.

Fix: Replace the canister purge valve (CPV) and or fuel line.

Recall R/2024/292 · Dated 24 July 2024 · Built 16 April 2019 to 15 February 2023

3,522
Apr 2024
Mcu software

Fault: On affected vehicles incorrect MCU (Motor Control Unit) calibration may result in a loss of propulsion while driving.

Fix: Update the MCU (Motor Control Unit) calibration

Recall R/2024/176 · Dated 16 April 2024 · Built 11 December 2023 to 21 February 2024

445
Mar 2024
Cross carline engine software

Fault: On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements.

Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles.

Recall R/2024/135 · Dated 13 March 2024 · Built 3 January 2022 to 8 November 2022

550
Mar 2024
Peugeot 208 instrument panel

Fault: Affected vehicles may have been assembled with the wrong instrument panel cluster which may display the speed in KPH instead of MPH.

Fix: Check the instrument cluster and replace it if necessary.

Recall R/2024/117 · Dated 1 March 2024 · Built 4 October 2023 to 4 November 2023

21
Dec 2023
On affected vehicles the a pillar trim may be incorrectly assembled which could lead to detachment of the trim through lateral airbag deployment.

Fault: On affected vehicles the A Pillar trim may be incorrectly assembled which could lead to detachment of the trim through lateral airbag deployment.

Fix: Remove A Pillar trim check clip assembly and refit correctly if necessary.

Recall R/2023/353 · Dated 11 December 2023 · Built 16 June 2023 to 22 November 2023

375
May 2023
On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.

Fault: On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.�

Fix: Reprogram the Powertrain Diagnosis ECU with updated software.

Recall R/2023/140 · Dated 9 May 2023 · Built 3 July 2019 to 26 November 2022

29,537
Apr 2023
Affected vehicles may have been fitted with tyres containing rubber of non-conformity that could affect handling and also impact regulatory requirements.

Fault: Affected vehicles may have been fitted with tyres containing rubber of non-conformity that could affect handling and also impact regulatory requirements.

Fix: Check and replace tyres if necessary.

Recall R/2023/111 · Dated 12 April 2023 · Built 28 February 2023 to 14 March 2023

152
Jan 2023
There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fault: There is an error in the software calibration of the traction battery control unit which could result in a loss of propulsion when driving.

Fix: Update the software of the traction battery control unit.

Recall R/2023/009 · Dated 17 January 2023 · Built 26 July 2022 to 1 December 2022

1,610
Dec 2022
On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance).

Recall R/2023/035 · Dated 13 December 2022 · Built 3 April 2017 to 6 July 2020

25,148
Dec 2022
On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.

Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump.

Recall R/2023/045 · Dated 13 December 2022 · Built 1 March 2017 to 3 April 2017

952
Dec 2022
Some braking and suspension components may not have been tightened to the correct torque during assembly.

Fault: Some braking and suspension components may not have been tightened to the correct torque during assembly.

Fix: Check and tighten affected bolts to the correct torque.

Recall R/2022/347 · Dated 2 December 2022 · Built 22 August 2022 to 23 August 2022

4
Sep 2022
Component fixings could have been tightened to incorrect torque settings

Fault: Various component fixings which have not been tightened to the correct torque settings due to incorrect tightening operations during the assembly

Fix: Retighten the affected component fixings to assure the correct torque tightening

Recall R/2022/285 · Dated 27 September 2022 · Built 2 April 2022 to 4 April 2022

2
Jul 2022
The high voltage harness fitted might not be to the correct specification

Fault: The High Voltage Harness might not be to the correct specification.

Fix: Check the harness conformity and replace it if necessary

Recall R/2022/203 · Dated 13 July 2022 · Built 28 March 2022 to 25 April 2022

16
Feb 2022
Vehicles may have an incorrect tightening torque on several rear axle component fixings

Fault: Vehicles may have an incorrect tightening torque on several rear axle component fixings.

Fix: Check and retighten all fixings to the correct torque settings.

Recall R/2022/043 · Dated 10 February 2022 · Built 9 December 2021 to 10 December 2021

3
Jan 2021
The brake vacuum pump may be affected by material detaching from the timing belt

Fault: The brake vacuum pump may be affected by material detaching from the timing belt.

Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt.

Recall R/2020/326 · Dated 20 January 2021 · Built 17 June 2013 to 1 April 2017

22,580
May 2020
The steering geometry could be incorrectly set

Fault: The steering geometry could be incorrectly set due to an incorrectly calibrated setting rig in the manufacturing plant.

Fix: Check the steering alignment and adjusting if set incorrectly. If the front tyres are worn these will also be replaced.

Recall R/2020/166 · Dated 26 May 2020 · Built 12 September 2019 to 18 March 2020

10
May 2020
The fixing of the front wing wheel arch trim does not conform to specification

Fault: The fixing of the front wing wheel arch trim does not conform to specification.

Fix: The repair consists of adding an additional fixing screw to the bottom of the front wheel arch trim.

Recall R/2020/163 · Dated 7 May 2020 · Built 29 July 2019 to 2 December 2019

107
May 2020
The fixing of the front wing wheel arch trim does not conform to specification

Fault: The fixing of the front wing wheel arch trim does not conform to specification.

Fix: The repair consists of adding an additional fixing screw to the bottom of the front wheel arch trim.

Recall R/2020/164 · Dated 7 May 2020 · Built 29 July 2019 to 2 December 2019

107
Feb 2020
The routing of the rear brake pipes may not conform to specification

Fault: The routing of the rear brake pipes may not be correct and could cause them to fail.

Fix: Check and replace affected pipes if necessary

Recall R/2020/038 · Dated 12 February 2020 · Built 20 August 2019 to 20 August 2019

1
Oct 2019
The calibration of the engine management software could result in emissions of NOX which do not comply with regulatory limits

Fault: Engine management software issue could result in incorrect emission levels.

Fix: Update the engine management software.

Recall R/2019/352 · Dated 18 October 2019 · Built 1 February 2017 to 12 April 2019

18,267
Sep 2019
Due to the calibration of the engine management software the NOX emissions may not comply with regulatory limits

Fault: The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Fix: Download new engine management software

Recall R/2019/330 · Dated 26 September 2019 · Built 25 September 2013 to 15 May 2016

9,218
Jan 2019
The steering column universal joint clamp may be incorrectly fitted to the steering column

Fault: The universal clamp fixing bolt is not correctly fitted in the recess at the end of the steering column.

Fix: Check and if necessary refit the steering column universal joint fixing.

Recall R/2019/010 · Dated 14 January 2019 · Built 4 July 2018 to 12 July 2018

25
Dec 2017
Engine component may not be to specification

Fault: An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

Recall R/2017/340 · Dated 15 December 2017 · Built 10 October 2017 to 30 November 2017

416
Nov 2017
Suspension and steering fixings may not be tightened to the correct torque

Fault: Due to a deviation in the production process certain suspension and steering fixings may not have been tightened to the correct torque.

Fix: On affected vehicles check fixings as indicated by the manufacturer. Replace any damaged fixings and tighten all relevant fixings to correct torque.

Recall R/2017/302 · Dated 3 November 2017 · Built 16 August 2017 to 20 September 2017

488
Apr 2017
Starter motor may not operate correctly

Fault: A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Fix: On affected vehicles check and where necessary replace the starter motor relay.

Recall R/2017/140 · Dated 24 April 2017 · Built 15 May 2016 to 12 October 2016

6,768
Apr 2017
Gearbox actuator ay not be to spectification

Fault: A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Fix: On affected vehicles replace the gearbox actuator

Recall R/2017/125 · Dated 7 April 2017 · Built 13 May 2016 to 25 August 2016

13
Apr 2017
Spoiler may detach

Fault: The bonding of the tailgate spoiler may not conform to specification. This could lead to a lack of adhesion and detachment of the spoiler

Fix: On affected vehicles replace the rear spoiler

Recall R/2017/120 · Dated 3 April 2017 · Built 7 January 2017 to 18 January 2017

8
Oct 2016
Loss of control

Fault: In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Fix: On affected vehicles replace the braking system hydraulic block

Recall R/2016/230 · Dated 14 October 2016 · Built 1 April 2016 to 6 April 2016

600
Jul 2016
Fuel may leak

Fault: The fuel injectors supply rail could develop a leak over a period of time leading to a drop in fuel pressure which can affect the operation of the stop start system. In some extreme cases the engine might not restart and a spray of petrol under the bonnet may occur which is a fire risk.

Fix: Recall the vehicles that are likely to be affected and check the fuel injector supply rail. Where necessary replace the fuel injector supply rail.

Recall R/2016/160 · Dated 14 July 2016 · Built 15 January 2014 to 12 June 2014

86
Mar 2016
Oil leak may damage engine

Fault: An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals.

Recall R/2016/043 · Dated 10 March 2016 · Built 21 January 2016 to 10 February 2016

25
Feb 2016
Fuel may leak if vehicle involved in a rollover incident

Fault: On the affected vehicles the non-return valve located inside the fuel tank may not conform to specification. If the vehicle was to roll over there is a risk of a fuel leak.

Fix: On affected vehicles checking the condition of the valve and replace the tank if necessary.

Recall R/2016/019 · Dated 17 February 2016 · Built 29 April 2015 to 9 July 2015

2,157
Mar 2015
Directional control may be affected

Fault: It is possible that the front subframe and suspension wishbones mounting bolts may not have been torqued to the correct specification. This could result in the mounting bolt working loose and falling from the vehicle plus the possibility of the insecurity of the subframe or the front suspension wishbone. This can cause an issue with the handling or even loss of control of the vehicle.

Fix: Recall all affected vehicles to check and retorque the front subframe and suspension wishbone mounting bolts.

Recall R/2015/060 · Dated 13 March 2015 · Built 3 December 2014 to 3 December 2014

2
Jul 2014
Vehicle control may be lost

Fault: Front subframes on affected vehicles may show signs of damage to the left hand mounting point caused during the manufacturing process. Over time this may affect durability and cause the mounting to fail. This can affect security of components attached to the subframe and may affect control of the vehicle.

Fix: Prior to failure the driver should notice excessive noise from this area. As a safety measure affected vehicles should be checked and where necessary the subframe replaced.

Recall R/2014/081 · Dated 22 July 2014 · Built 4 June 2014 to 11 June 2014

14
May 2014
Tailgate may shut without warning

Fault: Affected vehicles may have struts with a non compliant internal component. This may prevent the struts from maintaining the tailgate in the open position.

Fix: Non compliant struts are determined by using manufacturer test methods. If replacement is required both struts must be replaced.

Recall R/2014/058 · Dated 15 May 2014 · Built 11 March 2014 to 13 March 2014

125
Apr 2014
Directional control may be compromised

Fault: The front suspension wishbone mounting bolts might not have been manufactured to the correct specification potentially causing a risk of these parts breaking. Broken mounting bolts can be noticed by the driver through noises and poor directional control.

Fix: Recall the vehicles that are likely to be affected to replace the front suspension wishbone mounting bolts.

Recall R/2014/046 · Dated 22 April 2014 · Built 24 September 2013 to 26 November 2014

5,502
Feb 2014
Fuel may leak and create fire risk

Fault: It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes.

Recall R/2014/026 · Dated 27 February 2014 · Built 9 January 2014 to 14 January 2014

148
Dec 2012
Esp may not operate correctly

Fault: Some vehicles from the affected production batch may have an issue with the effectiveness of the ESP system caused by non-conformity with the ABS/ESP hydraulic block. Consequences: This non-conformity will not affect the operation of the ABS system or the efficiency of the brakes. It may affect the operation of the ESP system on the rare occasions that it is activated; the correction of the drive delivered to the road wheel(s) when the ESP is activated may not be accurate to how it is manufactured to respond.

Fix: The hydraulic ABS/ESP block is to be replaced.

Recall R/2012/158 · Dated 17 December 2012 · Built 19 July 2012 to 20 July 2012

14
Sep 2012
Brakes may fail

Fault: During production it is possible the brake system may not have been bled correctly and some air may remain in the brake system. This could result in increased brake pedal travel and a possible reduction in braking efficiency.

Fix: Affected vehicles will be recalled to have the brake system bled.

Recall R/2012/100 · Dated 12 September 2012

2
Jul 2012
Bonnet catch may not latch correctly

Fault: On a small batch of vehicles the bonnet catch may not be correctly installed. If the bonnet is opened and then closed incorrectly it could result in the latch being insecure.

Fix: Recall affected vehicles to check the bonnet catch. Where necessary the bonnet catch will be replaced.

Recall R/2012/080 · Dated 16 July 2012 · Built 2 March 2012 to 2 March 2012

1

Nothing matches that search on this page.

Vehicles affected is the number DVSA lists for each recall.

How to check a car for recalls

A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.

A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.

Frequently asked questions

How do I check if my 208 has an outstanding recall?

Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.

How many recalls has the Peugeot 208 had?

DVSA's recalls data lists 57 safety recalls covering the Peugeot 208, the most recent dated 5 October 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.

Does a recall mean a car is unreliable?

No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.

What should I do if my car is affected by a recall?

Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.

Where does this recall data come from?

From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.

Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.

Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.

Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.

Free vehicle check on WhatsApp

Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.

Open WhatsApp

How it works

Looking for a Peugeot 208?

See used Peugeot 208 cars listed on the MotifyMe® marketplace.

See 208 cars for sale