Peugeot 3008 Recalls
Safety recalls covering the Peugeot 3008 in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 54 safety recalls covering the Peugeot 3008, the most recent dated 5 October 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Peugeot 3008 recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Oct 2026 | 3008v3 - wrong front bumper installed bev instead of MHEV.Fault: On affected vehicles air defelectors may have been installed incorrectly to the front bumbper grille which can affect the airflow required for cooling the engine and 48V battery system Fix: Check and remove the defelectors if present. | 12 |
| Jul 2026 | Wrong tire class in cocFault: Affected vehicles may have a tyre class mismatch between the technical specification declared in the Certificate of Conformity and the actual vehicle configuration. Fix: Check the tyre class of all vehicle tyres and exchange all 4 for Class A+ tyres if necessary | 261 |
| Jun 2026 | Vsm software interior door handlesFault: Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit. Fix: Update the Vehicle Supervision Module software. | 10,423 |
| Apr 2026 | Mcu inverterFault: On affected vehicles the Motor Control Unit (MCU) Inverter may have a manufacturing deviation which could lead to gearbox malfunctions and the risk of an internal electrical short circuit leading to overheating or a fire. Fix: Replace the MCU Inverter. | 3 |
| Apr 2026 | Vsm software missing AEB telltale in case of blind camera.Fault: On certain Peugeot vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional pop-up appears for around 10 seconds at each key on/key off (Driving Assistance Sensor Blind: clean sensor see User Manual). The Automatic Emergency Braking system is operating in a degraded mode but remains functional due to radar support. Fix: To rectify this issue we will update the Vehicle System Management software | 2,443 |
| Jan 2026 | Peugeot 3008 wheel bolt tightening.Fault: Affected vehicles may have improperly tightened wheel nuts following a faulty rework. Fix: Check the torque of the wheel nuts on all for wheels and re-tighten if necessary. | 3 |
| Nov 2025 | Ball joint bracket fixation.Fault: On affected vehicles the front left and right control arm ball-joint bracket screws are at risk of fracture which could affect the vehicle's controllability. Fix: Inspect the marking on the left and right front ball-joint bracket and change if necessary. | 13,330 |
| Sep 2025 | Peugeot 3008v2 508v2 traction batteryFault: Affected vehicles may have a fault in the High Voltage Battery which could potentially lead to it overheating and in the worst case a battery or vehicle fire. Customers are advised to stop any plug-in charging and eSave charging until the vehicle is reworked. Fix: Update the battery management software or replace the High Voltage Battery if necessary. | 934 |
| Aug 2025 | Emission recall - on board diagnosticsFault: Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations. Fix: Update the Engine Control Unit software to ensure compliance to regulations. | 1,702 |
| Jul 2025 | Peugeot fuel pipeFault: On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire. Fix: Retighten the affected connections. | 13,940 |
| Jul 2025 | Peugeot dv5r engines camshaft chain.Fault: Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case. Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives. | 22,401 |
| Feb 2025 | Peugeot 308 408 3008 5008 fuel pipe leakageFault: Affected vehicles may face potential leakage of the under-bonnet fuel pipe due to a weakness of its crimping. Fix: Change the fuel pipe. | 283 |
| Feb 2025 | Peugeot 3008 5008 headrestFault: On affected vehicles front seat headrests are not to specification. Fix: Check the fixing notches of the front seat headrests and exchange them if necessary. | 971 |
| Dec 2024 | Peugeot 30085008 risk of broken bolt front control arm ball joint.Fault: On affected vehicles the fixing bolts on the front left or right bracket on the lower control arm may break. In the worst-case scenario 2 broken bolts could affect the controllability of the vehicle. Fix: Change the front left and right ball joint brackets. | 13,416 |
| Oct 2024 | Peugeot 3008 cradle bracketFault: On affected vehicles the cradle bracket is not according to specification. In some cases this could lead to cracking of the bracket and structural integrity loss resulting in loss of vehicle control. Fix: Check the cradle bracket and rework if necessary. | 203 |
| Jul 2024 | Peugeot 3008508 PHEV. traction batteryFault: On affected vehicles there is a fault in the High Voltage (HV) Battery which could potentially lead to a breakdown charging issue and/or overheating and in a worst-case scenario a High Voltage Battery or vehicle fire. Fix: Replace the High Voltage Battery. | 191 |
| Mar 2024 | Cross carline engine softwareFault: On affected vehicles below 12500 miles under certain conditions engine emissions may lead to a non-compliance to regulatory requirements. Fix: Check the mileage of the vehicle and update the ECU (Engine Control Unit) calibration on vehicles below 12500 miles. | 1,225 |
| Jul 2023 | Affected vehicles may have been supplied with a mode 2 (orange) charging cable that was not according to specification (a risk of a wrong safety calibration feature of the temperature sensor of the charging cable pins). in worst-case this could lead to a thermal incident during charging.Fault: Affected vehicles may have been supplied with a Mode 2 (orange) charging cable that was not according to specification (a risk of a wrong safety calibration feature of the temperature sensor of the charging cable pins). In worst-case this could lead to a thermal incident during charging. Fix: Check Mode 2 (orange) charge cable production date and replace if necessary. | 617 |
| Apr 2023 | Affected vehicles may face the risk of perforation of the HV battery reinforcing plate/battery cover over the vehicle lifetime due to water intrusion.Fault: Affected vehicles may face the risk of perforation of the HV battery reinforcing plate/battery cover over the vehicle lifetime due to water intrusion. Fix: A protective wax will be applied between HV battery reinforcing plate and battery cover. | 1,630 |
| Apr 2023 | Affected vehicles may experience HV battery overheating that may lead to a HV battery thermal runaway and in a worst case to a battery or vehicle fire.Fault: Affected vehicles may experience HV Battery overheating that may lead to a HV Battery thermal runaway and in a worst case to a battery or vehicle fire. Fix: The BMS (Battery Management System) will be reprogrammed with enhanced battery monitoring software. | 1,693 |
| Apr 2023 | Affected vehicles may experience HV battery overheating that may lead to a HV battery thermal runaway and in a worst case to a battery or vehicle fire.Fault: Affected vehicles may experience HV Battery overheating that may lead to a HV Battery thermal runaway and in a worst case to a battery or vehicle fire. Fix: The BMS (Battery Management System) will be reprogrammed with enhanced battery monitoring software. | 975 |
| Apr 2023 | Affected vehicles may experience HV battery overheating that may lead to a HV battery thermal runaway and in a worst case to a battery or vehicle fire..Fault: Affected vehicles may experience HV Battery overheating that may lead to a HV Battery thermal runaway and in a worst case to a battery or vehicle fire. Fix: The BMS (Battery Management System) will be reprogrammed with enhanced battery monitoring software. | 2,901 |
| Dec 2022 | On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil. Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump. | 952 |
| Dec 2022 | On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil. Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). | 25,148 |
| Jul 2022 | A high voltage battery where there is a mismatch in the voltage of the individual cellsFault: A high voltage battery where there is a mismatch in the voltage of the individual cells. Fix: Replace the HV traction battery | 4 |
| Jul 2022 | A high voltage battery where there is a mismatch in the voltage of the individual cellsFault: A high voltage battery where there is a mismatch in the voltage of the individual cells. Fix: Replace the high voltage battery. | 8 |
| Mar 2021 | The welding of the individual components of the tow bar might not meet the correct specificationFault: The welding of the individual components of the towbar might not meet the correct specification. Fix: Check the identity label and replace the tow bar if affected | 61 |
| Jan 2021 | The welding of the individual components of the towbar might not meet the correct specificationFault: The welding of some components to the towbar assembly may not meet specification. Fix: The replacement of the towbar. | 24 |
| Jan 2021 | The brake vacuum pump may be affected by material detaching from the timing beltFault: The brake vacuum pump may be affected by material detaching from the timing belt. Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt. | 45,160 |
| Dec 2020 | On some traction battery cells the alignment of the electrodes may be out of specificationFault: On affected vehicles the alignment of the electrodes may be out of specification on some cells of the traction batteries which may result in the release of toxic fumes or a thermal runaway. Fix: Replace the traction / drive battery. | 3 |
| Nov 2020 | The filtering performance of the diesel particulate filter may not meet the required specificationFault: The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification. Fix: Replace the DPF on affected vehicles. | 959 |
| Aug 2020 | The urea injector may block and lead to NOX emissions going out of regulatory limitsFault: The vehicles may be affected by a defect in the urea injector which might block and lead to NOx emissions going out of the regulatory limits. Fix: Updating the ECU software to avoid the gradual blocking of the urea injector | 5,125 |
| Jul 2020 | There is a possibility that the internal corrosion protection of the subframe is not durable enough.Fault: There is a possibility that the internal corrosion protection of the front subframe is not durable enough. Fix: Replacing the front subframe assembly. | 38 |
| Feb 2020 | Certain rear suspension fixing bolts may not conform to specificationFault: Certain rear suspension fixing bolts may not conform to specification which could cause them to break. Fix: Replace the affected bolts | 78 |
| Oct 2019 | The calibration of the engine management software could result in emissions of NOX which do not comply with regulatory limitsFault: Engine management software issue could result in incorrect emission levels. Fix: Update the engine management software. | 18,267 |
| Sep 2019 | Due to the calibration of the engine management software the NOX emissions may not comply with regulatory limitsFault: The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits. Fix: Download new engine management software | 9,218 |
| Apr 2019 | A plastic component inside the exhaust line could under certain conditions damage the diesel particle filterFault: A plastic component inside the exhaust line could under certain conditions damage the Diesel particle filter. Fix: Check and if necessary replace the particle filter. | 2,686 |
| Jul 2018 | Engine oil gallery sealing plug incorrectly tightenedFault: On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road. Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque | 47 |
| Jul 2018 | Engine could overheat leading to failureFault: Engine could overheat leading to failure in extreme cases Fix: Download new engine management software | 683 |
| Mar 2018 | Tightening torque of towbar fixing may be to wrong specificationFault: Tightening of some towbar fixings may not be to correct specification. Fix: Checking and if necessary correcting the tightening torque of the fixings. | 9 |
| Feb 2018 | Fuel may leakFault: The fuel tank shield may foul the fuel supply pipes. Over a period of time this may cause a fuel leak. Fix: On affected vehicles check condition of fuel pipes and replace where necessary. In addition add extra protection to existing and replacement pipes. | 12,054 |
| Feb 2018 | Engine may overheatFault: The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel. Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature. | 1,579 |
| Dec 2017 | Fuel may leakFault: Possible fouling between fuel lines and the fuel tank shield may over time cause the pipes to wear and fail. Over an extended period of time fuel leakage may be noticed under the vehicle. Fix: On the affected vehicles check condition of the fuel lines. Replace where necessary and add extra protection. | 12,056 |
| Dec 2017 | Engine component may not be to specificationFault: An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds. Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine. | 416 |
| Oct 2017 | Starter motor supply wiring harness may become damagedFault: The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit. Fix: On affected vehicles check the positioning of the terminaL. Correct it if necessary and add additional protection. | 1,703 |
| Jul 2017 | Starter supply wire may chafeFault: The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit. Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary. | 7,394 |
| Apr 2017 | Starter motor may not operate correctlyFault: A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire. Fix: On affected vehicles check and where necessary replace the starter motor relay. | 6,768 |
| Mar 2016 | Oil leak may damage engineFault: An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part. Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals. | 25 |
| Dec 2015 | Fuel may leakFault: The fuel heating device integrated in to the diesel fuel filter cover may be defective and allow heat to build up within the electrical supply connector causing the cover to distort and air to enter the fuel circuit. This could make the vehicles difficult to start and a warning light will be illuminated on the dash board. The engine could be difficult or not possible to start. In the worst cases a diesel fuel leak could eventually appear. Fix: Recall the vehicles that are likely to be affected and replace the fuel heater cover. Additionally the electrical connector will be inspected and where necessary replaced. | 12,833 |
| Apr 2014 | Drivers SEAT airbag may malfunctionFault: Affected vehicles may present friction wear on the driver's seat wiring harness. Potentially causing an electrical malfunction and in worst case scenario cause the unwanted triggering of the driver's seat air bag. Fix: The remedial operation consists of reinforcing and clamping the driver's seat harness. | 100 |
| Mar 2013 | Spot welds may not holdFault: On a very limited number of vehicles it is necessary to check the presence of specific spot welds on the vehicle body shell. Should it be identified that one of the welds has been missed in production the vehicle cannot be repaired. In the long term and in very rare cases body noises and squeaking could appear. Fix: In the rare case that the vehicle does not comply the vehicle will be removed from the road and the customer will be provided with a replacement vehicle. | 19 |
| Jan 2013 | Rear brake calliper mounting bolt could work looseFault: The tightening torque of the rear brake calliper mounting bolts could be incorrect. This incorrect tightening torque may in very rare cases eventually lead to the slackening of the bolt and an increase in noise during braking Fix: Replace the bolts and tighten to the correct torque | 2 |
| Feb 2011 | Fuel may leakFault: On some 2.0 l HDI vehicles potential contact between the fuel return pipe and the diesel filter support may eventually cause the pipe to become worn through friction. Fix: The manufacturer has requested that some protection be added to the pipe to ensure its long-term resistance to wear. | 2,834 |
| Oct 2009 | Loss of windscreen wiper functionFault: It has been identified that the potential exists that sub-standard front windscreen wiper mechanism were fitted during production. This can result when in use for one or more of the wiper arms to be immobilised in a random position. With the consequence of partial or total loss of the windscreen wiper function. Fix: Recalled vehicles will have the windscreen wiper motors inspected and changed as necessary. | 19 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my 3008 has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Peugeot 3008 had?
DVSA's recalls data lists 54 safety recalls covering the Peugeot 3008, the most recent dated 5 October 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Peugeot 3008?
See used Peugeot 3008 cars listed on the MotifyMe® marketplace.
See 3008 cars for sale