Peugeot 308 Recalls
Safety recalls covering the Peugeot 308 in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 59 safety recalls covering the Peugeot 308, the most recent dated 3 June 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Peugeot 308 recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Jun 2026 | Vsm software interior door handlesFault: Affected vehicles may experience an unexpected deactivation of the interior door handles when the key is in engine-running mode which could result in occupants being unable to exit. Fix: Update the Vehicle Supervision Module software. | 3,494 |
| Apr 2026 | Vsm software missing AEB telltale in case of blind camera.Fault: On certain Peugeot vehicles the Automatic Emergency Braking Assist telltale fails to illuminate if the front camera is blocked. No AEB warning telltale meaning no warning light appears in the instrument cluster. An additional pop-up appears for around 10 seconds at each key on/key off (Driving Assistance Sensor Blind: clean sensor see User Manual). The Automatic Emergency Braking system is operating in a degraded mode but remains functional due to radar support. Fix: To rectify this issue we will update the Vehicle System Management software | 645 |
| Jan 2026 | Peugeot cross carline fuel injection common rail.Fault: On affected vehicles a non-conformity issue with the fuel injection common rail may lead to a loosening of the nut and a potential fuel leak. Fix: Check the fuel injection common rail and if necessary replace the rail and high-pressure fuel pipes. | 47 |
| Aug 2025 | Emission recall - on board diagnosticsFault: Vehicles may be affected by incorrect performance of the On-Board-Diagnostics related to Selective Catalytic Reduction system and/or Diesel Particle Filter. The Malfunction Indicator Light (MIL) may not illuminate in the event of a malfunction and therefore does not comply with emission regulations. Fix: Update the Engine Control Unit software to ensure compliance to regulations. | 604 |
| Jul 2025 | Peugeot fuel pipeFault: On affected vehicles there there may be loose connections between a high-pressure fuel pipe and the engine fuel rail which potentially could lead to a leak and risk of fire. Fix: Retighten the affected connections. | 1,062 |
| Jul 2025 | Peugeot 308 SEAT belt fasteningFault: Affected vehicles may have been equipped with seat belt anchors not in line with regulatory requirements. Fix: Reinforce the seatbelt anchorage on the 2nd seat row. | 11,291 |
| Jul 2025 | Peugeot dv5r engines camshaft chain.Fault: Vehicles may be affected by premature wearing of the camshaft drive chain leading to abnormal noise or to a breakage of the chain in the worst case. Fix: Update the software to improve oil pressure and reduce wear. Check the engine noise and replace the chain if required. If no problem found change the oil to one with higher viscosity and special anti-wear additives. | 7,383 |
| May 2025 | Too low exhauxt temperature.Fault: On affected vehicles the exhaust temperature might be too low. This may lead to unrobust environmental performance. Fix: Update the engine software. | 2,113 |
| Feb 2025 | Peugeot 308 408 3008 5008 fuel pipe leakageFault: Affected vehicles may face potential leakage of the under-bonnet fuel pipe due to a weakness of its crimping. Fix: Change the fuel pipe. | 3 |
| Feb 2025 | Peugeot 208308 evcu updateFault: Affected vehicles may not comply with test requirements in the matter of emissions test execution by competent authorities and energy consumption may be too high. Fix: Update the electrical Vehicle Control Unit (eVCU) software. | 307 |
| Jan 2025 | Peugeot 308408 door ECU software update.Fault: Affected vehicles have been equipped with a door control unit which does not have the latest software version. Fix: Update the door control unit software on the driver and passenger side. | 2,529 |
| May 2024 | Peugeot 308 e-call not working due to duplicate imeiFault: On affected vehicles equipped with E-call the device may not function when trying to connect to E-Call (Emergency Call) and B-Call (Breakdown Call) due to incorrect BSRF (On-board radiocommunication transmitter) configuration and as a result does not comply with regulatory requirements. Fix: Check and replace the Radio frequency connectivity box. | 2 |
| Feb 2024 | Peugeot 308 VIN label wrong rear axle data.Fault: Affected vehicles may have been built with an incorrect rear axle weight value recorded on the Manufacturer VIN Label. Fix: Check Manufacturer VIN Label rear axle weight and replace the label if necessary. | 28 |
| Oct 2023 | On affected vehicles due to a potential lack of electric parking brake application when the driver presses the throttle pedal to start driving from a parking position on a slope the vehicle could move in the opposite direction until the driver pushes the brakes and stops the vehicle.Fault: On affected vehicles due to a potential lack of electric parking brake application when the driver presses the throttle pedal to start driving from a parking position on a slope the vehicle could move in the opposite direction until the driver pushes the brakes and stops the vehicle. Fix: Update the MCU (Motor Control Unit) with modified software. | 76 |
| Feb 2023 | Affected vehicles may have an incorrect torque on several fixation points which could result in reduced control of the vehicle and overheating of electrical connections.Fault: Affected vehicles may have an incorrect torque on several fixation points which could result in reduced control of the vehicle and overheating of electrical connections. Fix: Check and tighten fixings to correct torque. | 9 |
| Dec 2022 | On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil. Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). The timing belt will be checked and if needed replaced with other components of the braking assistance system and the vacuum pump. | 952 |
| Dec 2022 | On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil.Fault: On the affected vehicles the operation of the brake vacuum pump may be affected by material detaching from the timing belt caused by the ageing of the engine oil. Fix: To rectify this issue a software update will be downloaded which will improve the vacuum diagnosis (in order to warn earlier about the risk of loss or reduction of braking assistance). | 25,148 |
| Mar 2022 | The external door handle sliders might not be manufactured to the correct specificationFault: The external door handle sliders might not be manufactured to the correct specification. Fix: Check the production date stamped on the door handle slider and replace the slider if needed. | 17 |
| Jan 2021 | The brake vacuum pump may be affected by material detaching from the timing beltFault: The brake vacuum pump may be affected by material detaching from the timing belt. Fix: Update detection software inspect and if necessary replace vacuum pump and timing belt. | 22,580 |
| Nov 2020 | The filtering performance of the diesel particulate filter may not meet the required specificationFault: The filtering performance of the Diesel Particle Filter (DPF) may not meet the required specification. Fix: Replace the DPF on affected vehicles. | 959 |
| Jul 2020 | There is a possibility that the internal corrosion protection of the subframe is not durable enough.Fault: There is a possibility that the internal corrosion protection of the front subframe is not durable enough. Fix: Replacing the front subframe assembly. | 38 |
| Oct 2019 | The calibration of the engine management software could cause damage to the diesel particle filterFault: Engine management software issue could cause damage to the diesel particulate filter. Fix: Replace the filter and update the engine management software. | 117 |
| Sep 2019 | Due to the calibration of the engine management software the NOX emissions may not comply with regulatory limitsFault: The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits. Fix: Download new engine management software | 9,218 |
| Apr 2019 | A plastic component inside the exhaust line could under certain conditions damage the diesel particle filterFault: A plastic component inside the exhaust line could under certain conditions damage the Diesel particle filter. Fix: Check and if necessary replace the particle filter. | 2,686 |
| Jul 2018 | Engine oil gallery sealing plug incorrectly tightenedFault: On the affected vehicles the tightening of a sealing plug on the engine oil gallery may not be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road. Fix: The remedy consists of tightening the engine oil gallery sealing plug to the correct torque | 47 |
| Jul 2018 | Engine could overheat leading to failureFault: Engine could overheat leading to failure in extreme cases Fix: Download new engine management software | 683 |
| May 2018 | Airbags may not be triggered in the event of a collisionFault: On the affected vehicles an internal component within the airbag triggering ECU may have been damaged which could lead to non deployment. There are no early warning signs or symptoms for the customer to indicate if the ECU is incorrect. Fix: The manufacturer has no simple method to check the internal component. Therefore all ECU's in affected vehicles to be changed as a precaution. | 124 |
| Feb 2018 | Engine may overheatFault: The engine electronic cooling management control strategy and the maximum temperature alert threshold could cause the engine to overheat. This could result in a warning light and a message being displayed on the instrument panel. Fix: On affected vehicles download a new engine management software in order to modify the cooling management parameters to improve the control of the engine operating temperature. | 1,579 |
| Dec 2017 | Engine component may not be to specificationFault: An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds. Fix: On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine. | 416 |
| Jul 2017 | Starter supply wire may chafeFault: The positioning of the starter motor supply terminal may not conform to specification. Contact with a neighbouring component could cause a short circuit. Fix: On affected vehicles check the position of the terminal and where necessary reposition. Replace damaged components if necessary. | 7,394 |
| May 2017 | Front wishbone retaining bolts may not be to specificationFault: The front suspension wishbone fixing bolts may have a non-conformity which could lead to a risk of them breaking. The driver would be aware of a change in the behaviour of the vehicle�s directional control. Fix: On affected vehicles replace the front suspension wishbone fixing bolts | 1,051 |
| Apr 2017 | Starter motor may not operate correctlyFault: A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire. Fix: On affected vehicles check and where necessary replace the starter motor relay. | 6,768 |
| Oct 2016 | Tyres may deflate unexpectedlyFault: A possible non-conformity in the fitting of the tyre valves as well as an incorrect tightening torque of the valve securing nut could cause a valve to fail and a rapid loss of pressure in the tyres. The tyre pressure monitoring warning lamp would illuminate to warn the driver. Fix: On affected vehicles replace the tyre valves using a fitting jig. | 235 |
| Aug 2016 | Glass panel may detach without warningFault: The bonding of the tailgate components may not be to specification this could affect the retention of bonded parts over time. The owner could notice the individual components becoming loose or detached from the tailgate such as brackets bonded trim panels etc� If left unnoticed bonded items could become detached from the tailgate. Fix: Recall the vehicles that are likely to be affected and replace the complete tailgate assembly. | 206 |
| Jul 2016 | Fuel may leakFault: The fuel injectors supply rail could develop a leak over a period of time leading to a drop in fuel pressure which can affect the operation of the stop start system. In some extreme cases the engine might not restart and a spray of petrol under the bonnet may occur which is a fire risk. Fix: Recall the vehicles that are likely to be affected and check the fuel injector supply rail. Where necessary replace the fuel injector supply rail. | 86 |
| Mar 2016 | Door may open unexpectedlyFault: A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly. Fix: On affected vehicles check and where necessary replace door locks. | 679 |
| Mar 2016 | Door may open unexpectedlyFault: A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly. Fix: On affected vehicles check and where necessary replace door locks. | 1,176 |
| Mar 2016 | Door may open unexpectedlyFault: A manufacturing defect in one of the components of the door locks could cause jamming of the internal mechanism and prevent the closing of one or more of the vehicle's doors. In rare cases the door could unlock and open unexpectedly. Fix: On affected vehicles check and where necessary replace door locks. | 1,347 |
| Mar 2016 | Oil leak may damage engineFault: An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part. Fix: On affected vehicles replace the turbocharger lubrication union bolt and its seals. | 25 |
| Jan 2016 | Doors may open unexpectedlyFault: A manufacturing defect of a component within any of the four door locks could result in jamming of the internal mechanism which prevents the closing of any of the vehicle's doors or risk unexpected unlocking and opening of the doors. Fix: Recall the vehicles that are likely to be affected to check and where necessary replace the affected door locks. | 1,369 |
| Dec 2015 | Fuel may leakFault: The fuel heating device integrated in to the diesel fuel filter cover may be defective and allow heat to build up within the electrical supply connector causing the cover to distort and air to enter the fuel circuit. This could make the vehicles difficult to start and a warning light will be illuminated on the dash board. The engine could be difficult or not possible to start. In the worst cases a diesel fuel leak could eventually appear. Fix: Recall the vehicles that are likely to be affected and replace the fuel heater cover. Additionally the electrical connector will be inspected and where necessary replaced. | 12,833 |
| May 2015 | Possibility of loss of directional controlFault: The fixing bolts of the front suspension wishbones may not be to the correct specification. This could lead to the bolts failing and the security of the wishbones being compromised. If this occurs there is a possibility that the directional control of the vehicle could be adversely affected. Fix: Recall the vehicle that are likely to be affected and replace all the fixing bolts of the front suspension wishbones. | 14,840 |
| Dec 2014 | The incorrect gear may be selectedFault: On affected vehicles the gear lever reverse locking ring might not be to the correct specification. This could cause difficulty in selecting first and reverse gear or an error when changing between 1st and reverse.. Fix: Replace the gear lever reverse locking collar. | 184 |
| Feb 2014 | Fuel may leak and create fire riskFault: It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire. Fix: Recall all the affected vehicles and retorque the high pressure fuel rail pipes. | 296 |
| Oct 2013 | Rear screen could detachFault: On the affected vehicles the rear screen seal may not conform which could lead to water ingress in the boot and poor ageing of the seal. In very rare cases the rear screen could detach. Fix: Recall the vehicles that are likely to be affected to remove and refit the rear screen. | 18 |
| Feb 2013 | Loss of directional controlFault: On affected vehicles the upper section of the front right shock absorber may not be correctly tightened. This could eventually cause noise or banging and if left may affect the efficiency of the shock absorber. Fix: Replace the front right shock absorber. | 8 |
| Nov 2012 | Steering may detachFault: It is possible the mountings for the steering mechanism to engine subframe may not have been torqued to the correct specification. If this is the case the issue will be highlighted to the driver by noise or play in the steering. If the driver fails to take action to rectify the issue the steering may detach causing a possible loss of control. Fix: Recall affected vehicles to check the torque of the mountings and if necessay replace the steering mechanism. | 642 |
| Feb 2011 | Fuel may leakFault: On some 2.0 l HDI vehicles potential contact between the fuel return pipe and the diesel filter support may eventually cause the pipe to become worn through friction. Fix: The manufacturer has requested that some protection be added to the pipe to ensure its long-term resistance to wear. | 2,834 |
| Dec 2010 | Braking assistance may not perform correctlyFault: In very rare circumstances the vacuum pump one way valve may not function correctly which could affect the level of braking assistance. Fix: Recall the vehicles that are likely to be affected to replace the brake vacuum pump one way valve. | 24,220 |
| Dec 2010 | Brake may be inadvertently appliedFault: In certain circumstances it is possible that the passenger could inadvertently apply the service brake. The linkage is accessed above the passenger footwell. Fix: Affected vehicles will have a cover fitted above the passenger footwell to close off access to the brake linkage. | 13,263 |
| Oct 2010 | Lights may fail without warning.Fault: It has been identified that the position of the exterior lighting control ring may not be detected by the lighting management system and the lights may switch off without warning. Fix: Recalled vehicles will have the lighting management software updated. | 2,903 |
| Mar 2010 | Steering power assistance may be reducedFault: It has been identified that an incorrect version of the steering power assistance software has been uploaded.The effect of which may lead to stiffness within the steering system Fix: Recalled vehicles will have a steering power assistance ECU upgrade. | 5 |
| Mar 2010 | Seat may collapse without warningFault: It has been identified that the front seats may collapse without warning. due to an electrical control box software issue. Fix: Recalled vehicles will have the seat electrical control box replaced. | 532 |
| Mar 2010 | Possible inadvertent opening of the engine bonnetFault: It has been identified that the welds which secure the bonnet locking assembly may prove inadequate in use. This can result in difficulty closing the bonnet or failure of the lock to properly engage. Fix: Recalled vehicles will have a strengthening component fitted to the bonnet lining to ensure that the trigger cable remains firmly secured to the bonnet. In very rare cases and only if necessarythe bonnet will be replaced. | 7,165 |
| Oct 2009 | Lights may switch off unexpectedlyFault: In rare cases the lighting management system may incorrectly detect the lighting switch ring position which may cause the lights to cut out. Fix: Recall affected vehicles and download new version of vehicle exterior lighting software. | 21,354 |
| Oct 2009 | Breaking efficiency may be reducedFault: An internal component of the Brake Master Cylinder may not be in conformity and as such braking performance/efficiency may be affected. Fix: Recall affected vehicles and replace Master Cylinder. | 456 |
| Apr 2009 | Short circuit may occurFault: It has been identified that the shield which protects the diesel fuel filter in the event of an impact may be incorrectly positioned. This can result in the possibility that the impact shield is in too close a proximity to the positive terminal of the alternator. Fix: Recalled vehicles will have the position of the impact shield checked. Additionally the component will be fitted with an insulator. | 385 |
| Dec 2008 | Lighting harness could overheat resulting in loss of some vehicle functionsFault: It has been identified that use of a non standard interior lighting harness may cause excessive current flow and possible overheating and damage to a control unit This can result in the loss of a number of vehicle functions. Fix: Recalled vehicles will have the subject wiring harness modified. | 13 |
| Jun 2008 | Fuse box may cause equipment operational failuresFault: It has been identified that the main engine fuse box is not to the correct specification. This can result in operating faults or the failure of certain equipment. Fix: Recalled vehicles will have the subject fuse box replaced. | 7,360 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my 308 has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Peugeot 308 had?
DVSA's recalls data lists 59 safety recalls covering the Peugeot 308, the most recent dated 3 June 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Peugeot 308?
See used Peugeot 308 cars listed on the MotifyMe® marketplace.
See 308 cars for sale