BMW X5 Recalls
Safety recalls covering the BMW X5 in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 67 safety recalls covering the BMW X5, the most recent dated 2 March 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every BMW X5 recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| Mar 2026 | Replace the engine starter motorFault: The Safety Recall relates to the engine starter motor. The fault relates to the RSW22 starter RWT (reinforced water tightness). It was found that with RWT starters an increased abrasion of the magnetic contact can cause the growth of deposits at the lowest point of the relay interior. This in turn may increase the relay contact resistance resulting in false starts or even causing short circuits and possibly a thermal reaction. In case of a short circuit the possibility of a thermal event cannot be excluded. This may happen while attempting to start the vehicle or while driving due to vibrations causing a short circuit due to moving deposits. Fix: On the affected vehicles the starter motor will be replaced with a variant by another supplier with a different design. Until the repair has been completed it is recommended to not leave the vehicle running unattended after starting the engine. | 2 |
| Dec 2025 | Takata driver and/or passenger airbag recall (global vins)Fault: Affected vehicles are already included in Safety Recalls within the markets they have previously resided in. The vehicles may be fitted with a driver and/or passenger airbag/s which if deployed may do so with excessive force causing sharp metal fragments to be released this may cause serious injury which could prove fatal to people in the vicinity. Fix: Vehicles will have the affected airbags checked and if necessary replaced. | 5,160 |
| Oct 2025 | Replace the engine starter motorFault: For affected vehicles local overheating may occur at the electrical contacts of the vehicle's engine starter motor. This may cause an increase in current flow resulting in local overheating or risk of thermal event. Fix: Replacement of the starter motor. | 4 |
| Sep 2025 | Check windscreen bonding reworking if necessaryFault: For affected vehicles there is concern that a gap in the windshield urethane seal at the right A-pillar was created. Due to the gap water can ingress with possible water contamination of the glove box and carpet area including the Body Domain Control unit (BDC) and power distribution box. Fix: Check bonding of windshield and for water contamination if necessary reseal windscreen and and inspect electrical components replacing if required. | 6 |
| Oct 2024 | Hydraulic brake system unit replacementFault: On affected vehicles the brake servomotor was improperly welded. The weld seam might not withstand the stresses caused under high brake pressure leading to a requirement for a higher brake effort increasing the braking distance. Fix: Affected vehicles will have the hydraulic unit of the brake system replaced. | 13 |
| Oct 2024 | Check driver’s airbag for conversion takata sdi & psdi-5Fault: Affected vehicles may have had a retrofit or conversion of the airbag using a previously recalled airbag variant which if deployed may do so with excessive force causing sharp metal fragments to be released this may cause serious injury possibly fatal to people in the vicinity. The original factory fitment airbag for the vehicle is not affected. Fix: Vehicles will have the airbag checked and if necessary replaced. | 5,316 |
| Sep 2024 | Integrated braking systemFault: On certain vehicles the Integrated Brake (IB) system may be impaired due to contamination between electrical contacts. Fix: Vehicles that may be affected by contamination are required to have the vehicle's software updated which can detect signal interference before it occurs. If symptoms are detected you should refrain from use of the vehicle and the affected Integrated Brake (IB) system component will be replaced. | 9,166 |
| Aug 2024 | Engine starter motor / dme software updateFault: On affected vehicles the starter motor may be overloaded due to repeated lengthy attempts to start the engine as the software based overload protection is not sufficient. Fix: On affected vehicles improved software will be installed on the DME (engine starter motor electronics control unit) | 1 |
| Jul 2024 | Owners manual g05Fault: On affected vehicles in the owner's manual the maximum permissible limits of the vehicle regarding weight data/additional load values that are specified are stated too high Fix: On affected vehicles an updated insert sheet will be added to the owner's manual. | 585 |
| May 2024 | Seat belt warning (front SEAT belts)Fault: On affected vehicles the hall sensor in the driver and passenger front seat belt stalks may not have been correctly installed and it may indicate the seat belt is inserted correctly when it actually is not. Fix: On affected vehicles the seat belt stalks will be tested and replaced if necessary. | 71 |
| May 2024 | Replace vanos bolts n51 n52 n55Fault: On affected vehicles overtime the aluminium screws can loosen or break on the adjustable variable camshaft timing (VANOS) units potentially resulting in engine emergency mode being activated. Fix: On affected vehicles the eight aluminium screws will be replaced if evidence of faulty screws is found then the VANOS adjustment unit will also be replaced. | 2 |
| Mar 2024 | Integrated braking systemFault: On affected vehicles an unexpected loss of hydraulic brake assistance may occur and may result in a different pedal behaviour under specific conditions an extended braking distance may be experienced and ABS/Stability control may be impaired Fix: On the affected vehicles the Integrated Brake System will be replaced | 1,833 |
| Dec 2023 | On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic moduleFault: On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module Fix: On affected vehicles the transmission mechatronic module will be replaced | 26 |
| Oct 2023 | Checking potential vehicle damageFault: On affected vehicles risk of potential flooding could have occurred leading to salt water ingress whilst parked in port awaiting shipping Fix: The affected vehicles will be thoroughly checked cleaned and reworked as required | 197 |
| Aug 2023 | The driver and front passenger airbags may deploy with too much explosive force causing sharp metal fragments to be released into the cabin.Fault: The driver and front passenger airbags may deploy with too much explosive force causing sharp metal fragments to be released into the cabin. Fix: Replace the driver and front passenger airbags. | 44,407 |
| Jan 2023 | A possible degradation of the propellant tablets could lead to an over-aggressive combustion in the event the airbag is activated which may cause the inflator body to rupture.Fault: A possible degradation of airbag propellant tablets could lead to an over-aggressive combustion in the event the airbag is activated which may cause the inflator body to rupture. Fix: On affected vehicles the drivers airbag module will be replaced. | 22,897 |
| Aug 2022 | Undetected EGR system leaks may cause thermal activity in the intake manifoldFault: Undetected EGR System leaks may cause thermal activity in the intake manifold. Fix: The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality. | 322,745 |
| Aug 2022 | The exhaust gas recirculation cooler may leak over time and cause thermal incidentFault: The Exhaust Gas Recirculation cooler may leak over time and cause thermal incident. Fix: On the affected vehicles the EGR cooler module will be replaced. | 319,399 |
| Mar 2022 | The HV batteries may fail due to impurities in the production processFault: The HV batteries may fail due to impurities in the production process. Fix: The affected high-voltage cell modules will be replaced | 411 |
| Aug 2021 | The oil filter line could come into contact with the brake lineFault: The oil filter line may come into contact with the brake line. Fix: Install a modified rubber spacer and replace any brake lines showing signs of chafing. | 1 |
| Aug 2021 | The steering column shaft could detach from the double jointFault: The steering column shaft assembly may detach from the bottom double joint. Fix: Check the bottom end of the steering shaft and if required resecure the shaft using a new screw. | 882 |
| Jul 2021 | The brake pedal shaft could become detached from the pedal controls bearing mountFault: It is possible that the brake pedal shaft could become detached from the pedal controls bearing mount. Fix: On affected vehicles the brake pedal bearing shaft must be secured in the pedal controls with a roll pin. | 1,963 |
| Jun 2021 | The reinforcement ring (thimble) may not have been securely crimped onto the belt tensioner's steel cableFault: The reinforcement ring (thimble) may not have been securely crimped onto the belt tensioner's steel cable. Fix: Check the belt buckle and if necessary conduct replacement of the lower strap including belt tensioner. | 8 |
| Jun 2021 | The exhaust gas recirculation module could leak over timeFault: The Exhaust Gas Recirculation (EGR) Module could leak over time�and cause thermal incident. Fix: The EGR cooler will be internally inspected with an endoscope and replaced if evidence of leaking is found. | 18,330 |
| Apr 2021 | Incorrect headrest rods may have been installed in the backrest of the second row of seats on the outer sideFault: Incorrect headrest rods may have been installed in the backrest of the second row of seats on the outer side. Fix: On affected vehicles the outer headrest of the second seat row will be checked and replaced if necessary. | 35 |
| Feb 2021 | The integrated brake system hydraulic unit may have been produced incorrectlyFault: The Integrated Brake system hydraulic unit may have been produced incorrectly Fix: Replace the Integrated Brake system hydraulic unit. | 139 |
| Feb 2021 | Some 22 Continental tyres were produced out of specificationFault: Some 22� Continental tyres were produced out of specification. Fix: The tyres will be inspected for a specific DOT and mould number and will be replaced if found to be within the faulty range. | 4 |
| Feb 2021 | The exhaust gas recirculation cooler could leak over timeFault: Leaking glycol coolant could create in combination with soot and oil sediments in the EGR module ignitable deposits. Fix: The EGR cooler will be internally inspected with an endoscope and replaced if evidence of leaking is found. | 63,888 |
| Jan 2021 | The battery cables on the 48v starter generator may not have been sufficiently secured during productionFault: The battery cables on the 48V starter generator may not have been sufficiently secured during the production process. Fix: Check the screw connection of the 48V positive / negative battery cables on the starter generator and rework if necessary. | 388 |
| Dec 2020 | Remaining particles in the cells of the high voltage battery can cause a short circuitFault: A possibility of impurities contained in the HV batteries may cause short circuit. Fix: Testing of battery charge cycles and replacement of the HV cells where necessary. | 2,665 |
| Nov 2020 | An additional crash pad is required behind the auxiliary batteryFault: To comply with the regulation an additional crash pad is required behind the auxiliary battery. Fix: On the affected vehicles the crash pad will be retrofitted. | 97 |
| Nov 2020 | The front axle support (subframe) welding process has not been completed according to specificationsFault: The front axle support (subframe) welding process has not been completed according to specifications. Fix: Replace the front axle support. | 10 |
| Oct 2020 | Remaining particles in the cells of the high voltage battery can cause a short circuitFault: In very rare cases welding beads were not always completely removed in the cleaning process during battery production. Fix: Test and replace the High Voltage batteries if affected. | 871 |
| Aug 2020 | A starter motor bolt may have been installed incorrectly and become lost inside the transmission bell housingFault: A starter bolt may have been installed incorrectly and become lost inside the transmission bell housing. Fix: The starter motor will be removed and checked for a bolt that is adrift any damage found will be rectified. | 11 |
| Jul 2020 | The steering shaft bearing plate may not be screwed to the engine bulkhead correctlyFault: The steering shaft bearing plate may not have been screwed on correctly. Fix: On the affected vehicles the screw connection of the steering shaft bearing plate will be inspected and if necessary correctly attached or replaced. | 1 |
| Jul 2019 | Wheel bolts on left side may not have been tightened correctlyFault: The wheel bolts (left side) that may not have been tightened to specifications Fix: On the affected vehicles all wheel bolts on the left side will be replaced and tightened to specifications. | 1 |
| Jul 2019 | Movements of the connector of the blower regulator wiring harness could lead to frictional corrosionFault: The blower regulator wiring could be damaged increasing the risk of fire. Fix: The connection of the blower-regulator will be checked and reworked and if necessary the blower regulator will be replaced. | 31,601 |
| Mar 2019 | Incorrect tightening torque of left front SEAT fixing boltsFault: An incorrect tightening torque of the fixing bolts of the left front seat. Fix: Affected bolts will be checked and tightened with the correct torque; if necessary the bolt will be replaced. | 11 |
| Mar 2019 | Potential rupture of driver front air bag inflatorFault: The front drivers air bag may not deploy correctly on activation. Fix: Check and replace the drivers front air bag if required. | 2,503 |
| Mar 2019 | Auxiliary water pump's electronic circuit board could lead to a short circuitFault: The auxiliary water pump may short circuit causing a thermal incident. Fix: The Auxiliary Water Pump of the affected vehicles will be replaced. | 5,866 |
| Feb 2019 | The idler pulley bolt could become loosened over timeFault: The power steering idler pulley may detach. Fix: Replace the pulley securing bolt with an alternative component. | 21,123 |
| Dec 2018 | Exhaust gas recirculation module cooler could leakFault: The EGR cooler may leakpresenting a fire risk Fix: A visual inspection of the EGR cooler to check for leaks and excessive build-up of deposits. The EGR cooler will be replaced on all affected vehicles | 225,449 |
| Nov 2018 | Exhaust gas recirculation cooler could potentially leak over timeFault: The EGR cooler may leakpresenting a fire risk. Fix: The EGR cooler will be replaced with an improved version. | 153,602 |
| Oct 2018 | Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specificationFault: Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specification. Fix: On the affected vehicles the wheel bolts will be replaced. | 19 |
| Dec 2016 | Engine may cut outFault: It has been identified that the bolt that connects the ground cable from the wiring harness of the Digital Motor Electronics (DME) to the engine block may not have been tightened/torqued to the correct specification. This can lead to an under voltage supply which can trigger a reset of the DME. This can result in the engine cutting out or depending on vehicle speed to restart/turn on the engine once the reset has been completed. Fix: Recall all affected vehicles to check and if required retorque the bolt for the ground cable on the engine block. | 1 |
| Dec 2016 | Power steering may not perform correctlyFault: The electrical contact of the Electronic Control Unit (ECU) of the Electric Power Steering (EPS) is not sufficiently robust over the service life of the vehicle. As a result the power steering support may fail possibly leading to disconcerting driving situation for the driver. Additionally in a few cases a localised thermal event cannot be excluded. Fix: Recall the vehicles that are likely to be affected and replace the steering gear (EPS). | 41 |
| Nov 2016 | Drivers airbag may deploy incorrectlyFault: The driver's air bag inflator may rupture during deployment. Metal shards may pass through the air bag material and cause injury to occupants. Fix: On affected vehicles replace air bag and inflator assemblies. | 218,559 |
| Dec 2014 | Safety belt may not restrain occupantFault: For the left hand rear comfort seat the bracket to which the seat belt buckle is mounted may not be correctly positioned. The incorrect positioning causes incorrect welding of the bracket to the seat frame. If a collision occurs the welding for the bracket may weaken / fail leading to increased risk for the passenger in that seat. Fix: Recall the vehicles that are likely to be affected and replace the seat frame for the left hand rear comfort seat. | 5 |
| Jul 2014 | Engine emergency mode may be activated during drivingFault: The screws retaining the variable camshaft timing (VANOS) housing may loosen and under certain circumstances the heads may break off. This can lead to the VANOS leaking oil internally and adversely affect the valve timing adjustment. If found to deviating from targeted data the engine emergency mode will be activated. This will be indicated by a distinct change in engine running. The orange engine management warning lamp and a check message; On vehicles with N51/N52 engines this will appear at ignition recycle on N55 engine it will display immediately. Fix: Repalce bolted connection of the VANOS adjustment unit | 2,967 |
| May 2014 | Child safety lock may not activateFault: It is possible that vehicles fitted with Automatic Soft-Closure Feature (SCA) rear doors may have an issue with out of tolerance on the SCA mechanism which can result in the deactivation of the child locks when they are activated. This could result in a child unintentionally opening the door and exiting the vehicle. The driver is informed that the rear door is open by a warning on the instrument panel and an acoustic (noise) warning. Fix: Recall all affected vehicles to check the locks and replace them if required. | 131 |
| Sep 2013 | Possibility of fireFault: Due to a fault with an internal connection within the Fuel Filter Heater (FFH) it is possible that during temperatures below freezing the FFH can remain permanently activated. This will normally cause the FFH to overheat which will result in the inability to start the vehicle due to a flat battery. This can occur even when the ignition is turned off. However in extreme cases it could cause a vehicle fire. Fix: Recall all affected vehicles to replace the FFH. | 21,502 |
| Apr 2013 | Brake power assistance may be affectedFault: Brake performance may be affected as a result of oil contamination of the brake servo. The servo membrane could over a period of time soften and fail causing lower levels of servo assistance for the brakes. Fix: Recall the vehicles that are likely to be affected to replace the vacuum hose and fit a non-return valve (oil stop) between the booster and servo. Where necessary the servo and master cylinder will be replaced. | 759 |
| Dec 2012 | Drive may failFault: The power steering pump drive belt tensioner pulley securing bolt may fail which will lead to the loss of power steering assistance and the necessity for the driver to supply additional input to steering the vehicle. Fix: Recall the vehicles that are likely to be affected to replace the steering pump drive belt tensioner pulley securing bolt with a more robust version. | 22,737 |
| Jul 2012 | Potential fire riskFault: The power steering box housing may not be machined to the correct specification. This could cause an over pressurisation of bellows due to the insecurity of a snap ring and result in a sudden loss of hydraulic pressure. Oil will then be sprayed onto hot engine components and may ignite. Fix: Affected vehicles will be recalled to have the steering box replaced. | 5 |
| Apr 2012 | Fire may occurFault: Some engines are fitted with an additional water pump for the turbo charger. In some circumstances a crack may develop which then leads to melting of the plug connections and the housing. Further heat development may then lead to scorch damage. In exceptional cases such overheating can lead to smouldering of the water pump. If smouldering occurs an engine compartment fire and vehicle fire cannot be excluded. Fix: The water pump will be replaced for a new more robust version. | 21 |
| Nov 2011 | Short circuit may occurFault: Due to the ingress of moisture it is possible that a short circuit can occur in the additional coolant pump for the exhaust turbocharger. The driver will be informed of the issue by a warning message on the display in the instrument panel. If not addressed it is possible for further heat build up in the pump which may cause the plug connection and housing to melt and in extreme cases a localised fire in the engine compartment or vehicle. Fix: Recall all affected vehicles for the replacement of the additional coolant pump. | 557 |
| Oct 2011 | Risk of fireFault: Moisture may enter the fuel filter heater at an electrical connection. Should this occur it can cause a discharge of the battery causing non starting of the vehicle. Also if it occurs whilst the vehicle is in motion it could result in a fire when the vehicle is left unattended. Fix: Recall all affected vehicles and replace the fuel filter heater. | 21,923 |
| Nov 2010 | Electric fuel pump may failFault: Due to a manufacturing defect which causes premature wear of the fuel pump commutator it is possible that the engine might cut out whilst driving. Fix: Recall the vehicles that are likely to be affected to replace the fuel pump. | 4 |
| Jul 2009 | Brakes may failFault: It has been identified that during the manufacturing process cracks may have formed in the area of the brake disc body. Subsequent surface treatment means that any such crack will not be detectable at a later date. Should a crack have formed this may cause the brake disc to fail whilst the vehicle is in motion causing the affected brake to become inoperative. Fix: Recalled vehicles will have the rear axle brake discs checked for the affected production date. The brake discs will be checked if necessary. | 53 |
| Nov 2008 | Airbag may deploy inadvertentlyFault: The front air bags may trigger unnecessarily and the possibility of occupant injury cannot be excluded. Fix: Recall the vehicles that are likely to be affected to recode the air bag control unit. | 6,240 |
| Aug 2007 | Brake fluid may leakFault: If a brake fluid leak occurs the brake fluid low level warning may be given too late. Fix: Recall the vehicles that are likely to be affected to check the serial number of the brake servo and where necessary replace the cap for the expansion tank which includes the warning switch. | 1,887 |
| Jul 2007 | Driver's SEAT belt may de-latchFault: It has been identified that in the event of a situation which requires activation of the driver's seat belt tensioner. The possibility exists that due to an unfavourable pulse within the seatbelt buckle tensioner mechanism the buckle may open inadvertently. Fix: Recalled vehicles will have the relevant electronic control units reprogrammed. | 1,606 |
| Feb 2005 | The bearings of the fuel injection pump may failFault: The bearings of the high pressure fuel injector pump may fail after a short travelled distance (approximately 3000 to 6000 miles) This leads to a total failure of the engine's fuel supply which results in the engine stalling. Fix: Recall likely to be affected vehicles and replace the fuel injector pump. | 697 |
| Jul 2004 | Possibility of inadvertnent loss of engine powerFault: Due to a hardware fault within the digital engine electronic control unit the possibility exists that the unit could fail completely resulting in loss of engine power. Fix: Recall likely to be affected vehicles and replace the control unit with a quality assured item. | 231 |
| Feb 2003 | Seat belt tensionersFault: It is possible that the reinforcement ring in the front seat belt tensioner has not been securely crimped onto the belt tensioner's steel cable. This connection could give in the event of a severe collision and could work loose in extreme cases. Fix: Check the production date on both front seat belt tensioners and replace if they fall within the affected production period. | 445 |
| Feb 2003 | Front brake hose could rub on tyreFault: The securing grommet for the front brake hose onto the suspension strut may become detached. In this situation it is possible that the hose could rub against the inside of the front tyre causing consequential damage to the hose. In extreme cases brake fluid could leak causing loss of braking action on the front axle. Fix: The repair will involve fitting a securing clip to the hose and grommet and checking the hose for damage. | 9,090 |
| Jul 2002 | Brake pedal may become detachedFault: The brake pedal mounting shaft may have been incorrectly manufactured. In this situation the bush may become loose and in very extreme situations the brake pedal can become detached. Fix: Check the brake pedal shaft in the bearing mount and secure it with a new roll pin. | 1,971 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my X5 has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the BMW X5 had?
DVSA's recalls data lists 67 safety recalls covering the BMW X5, the most recent dated 2 March 2026. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status
- ✓Send a photo of a number plate and we read the reg for you, then ask you to confirm it
- ✓Outstanding safety recall check, included in every lookup
- ✓Free valuation: add the mileage after the reg, for example 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Find a vehicle: for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send your question with the link to the vehicle on MotifyMe or its registration. Or search first, then reply ASK, the number of the vehicle and your question, for example ASK 2 is it still available. If we are not sure which vehicle you mean, we will ask
- ✓Fuel: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out