Mercedes-Benz B Class Recalls
Safety recalls covering the Mercedes-Benz B Class in DVSA's recalls data, newest first.
Last updated 22 November 2026
Short answer:
DVSA's recalls data lists 47 safety recalls covering the Mercedes-Benz B Class, the most recent dated 6 May 2024. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Check a registration for outstanding recalls, free
Every Mercedes-Benz B Class recall
Open a recall to see the fault, the fix and the build dates it covers.
| Date | Recall | Vehicles affected |
|---|---|---|
| May 2024 | Srpc2404 - backup function of steering softwareFault: On affected vehicles the backup function of the steering software might not meet specifications. As a result the steering power support might be impaired and a loss of steerability cannot be ruled out. Fix: Update the software of the electric steering on the affected vehicles. | 10,592 |
| Mar 2023 | Affected vehicles have an engine control unit software that deviates from the local legal requirementsFault: Affected vehicles have an engine control unit software that deviates from the local legal requirements.� Fix: Update the diesel engine control unit software. | 2,593 |
| Dec 2021 | Update to the diesel engine control unit software to improve the emissionsFault: As a result of a directive from Germany�s Federal Motor Transport Authority (KBA) changes are required to certain specific calibration functions within the engine management systems of certain vehicles. Fix: Conduct an update to the diesel engine control unit software. | 31,414 |
| Dec 2021 | Update to improve emissionsFault: As a result of a directive from Germany�s Federal Motor Transport Authority (KBA) changes are required to certain specific calibration functions within the engine management systems of certain vehicles. Fix: Conduct an update to the diesel engine control unit software. | 6,014 |
| Nov 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 100,780 |
| Jul 2021 | A bore in the universal joint on the steering shaft might not meet specificationsFault: A bore in the universal joint on the steering shaft might not meet specifications. Fix: Check the steering shaft on the affected vehicles and replace it if necessary. | 13,707 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 217,942 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 173,208 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 181,432 |
| May 2021 | The emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 213,330 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 20,820 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 325,162 |
| May 2021 | The behaviour of the emergency call system might not meet specificationsFault: The behaviour of the emergency call system might not meet specifications. Fix: Update the software of the communication module for the emergency call system. | 162,534 |
| Mar 2021 | The communication module may be deactivatedFault: The communication module may be deactivated Fix: Carry out a check of the configuration of the communication module on affected vehicles and if necessary activate the communication module. | 48 |
| Oct 2020 | An electrical contact inside the engine control unit may not meet the specificationFault: An electrical contacting inside the engine control unit might not meet the specification Fix: Replace the engine control unit on the affected vehicles | 37 |
| Oct 2020 | The oil supply line of the turbocharger may leakFault: The oil supply line of the turbocharger might leak Fix: Check the oil supply line of the turbocharger on the affected vehicles and replace it if necessary | 1,074 |
| Oct 2020 | The emergency call system (ECALL) does not meet the specificationFault: On affected vehicles the software of the communication module for the emergency call system does not meet the specification Fix: Update the software of the communication module for the emergency call system | 3,127 |
| Jul 2020 | The calibration of the occupant classification system for the passenger SEAT may not meet the specificationFault: The calibration of the occupant classification system for the passenger seat might not meet the specification. Fix: Replace the passenger seat cushion | 75 |
| Nov 2019 | The refrigerant in the air conditioning system does not meet legal requirementsFault: The refrigerant used in the air conditioning system does not meet legal requirements. Fix: The air conditioning system will be adapted for the usage of the new refrigerant. | 624 |
| Nov 2019 | The refrigerant used in the air condition system does not meet legal requirementsFault: The refrigerant used in the air conditioning system does not meet legal requirements. Fix: Adapt the air conditioning system for usage of the new refrigerant. | 1,407 |
| Nov 2019 | The refrigerant used in the air conditioning system may not meet legal requirementsFault: The refrigerant used in the air conditioning system does not meet legal requirements Fix: The air conditioning system will be adapted for the usage of the new refrigerant. | 58 |
| Sep 2019 | The software of the radar control unit may not meet specificationFault: ; The software of the radar control unit might not meet the specification Fix: Update the software of the radar sensor control unit on the affected vehicles. | 294 |
| Sep 2019 | Air condition system refridgerant does not meet requirementsFault: The refrigerant used in the air condition system does not meet legal requirements. Fix: The air conditioning system to be adapted for the usage of the new refrigerant (R1234yf). | 7,516 |
| Jul 2019 | The software of the transmission control unit might not meet specification.Fault: Under certain circumstances it might not be possible to shift into Drive or Reverse mode. Fix: Update the transmission control unit software of the affected vehicles. | 1,209 |
| Apr 2019 | The driver might temporarily not be able to deactivate the high beam with the high beam lever.Fault: The driver might temporarily not be able to deactivate the high beam with the high beam lever. Fix: The software is to be updated on affected vehicles. | 957 |
| Apr 2019 | The locknuts securing the airbag might be insufficiently tightenedFault: One or more of the four locknuts securing the drivers airbag might be insufficiently tightened. Fix: Replace the driver airbag of affected vehicles. | 3 |
| Feb 2019 | The calibration of the front passenger SEAT occupant clasification system may not correspond to specificationsFault: Incorrect calibration of the front passenger occupant classification system. Fix: Replace the seat cushion of the front passenger seat. | 163 |
| Nov 2018 | Doors on left vehicle side (passenger side) remain permanently locked after the vehicle has been locked/unlocked with the remote control keyFault: Possible inability to open the left hand door externally or internally. Fix: Replace the affected door locks on the left side of the vehicle. | 5,030 |
| Jun 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components | 78,608 |
| May 2018 | Steering components may be insufficiently groundedFault: It has been determined that the steering airbag electrical components are insufficiently grounded. Failure of the steering column module clock spring could result in an inadvertent deployment of the driver airbag which may cause risk of injury to the driver and an increased risk of a potential collision. Fix: On affected vehicles the manufacturer will fit a contact bridge to the outer race of the steering column top bearing which will provide correct grounding. | 74,329 |
| Apr 2018 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 67,027 |
| Dec 2017 | Electrical wiring in steering assembly may be insufficiently groundedFault: The steering column clock spring may break. This will cause warning messages to illuminate in the instrument cluster but in extreme instances it may cause the driver's airbag to deploy. Fix: Affected vehicles will be recalled to establish sufficient grounding of the steering components. | 46,093 |
| Jun 2017 | Vacuum line brake booster may breakFault: The connection fitting of the vacuum line to the brake booster is not to specification and my not be durable. If the connection fails the brake booster will no longer be supplied with vacuum. After a few brake applications the driver will have to apply additional pressure to the brake pedal to gain the appropriate braking effect. Fix: Recall the vehicles that are likely to be affected and replace the vacuum line on the brake booster with a quality assured component. | 4,787 |
| Jun 2017 | Starting current limiter may overloadFault: Where the car incurs severe engine damage resulting in the engine failing to turn over (engine seizure) and if the driver repeatedly attempts to start the engine despite the engine not cranking the very high electrical current could lead to overheating of the starting current limiter and the potential for a fire. Fix: Recall the vehicles that are likely to be affected and install an additional fuse in the electrical line to the starter. | 74,444 |
| Jun 2017 | Airbag may not deploy correctlyFault: The propellant mixing ratio in the igniters of the front passenger airbag assembly may not meet specification. If the airbag is required and activated it might not deploy or not completely deploy. This could increase the risk of injury to the occupants. Fix: Recall the vehicles that are likely to be affected and replace the front passenger airbag assembly. | 1,034 |
| Jun 2016 | Risk of fireFault: A threaded connection in the Prefuse box may not be tightened to the correct specification. This may excessive resistance and create a heat source. This could cause a fire. Additionally vibration may cause power disruption which could affect the operation of steering power assistance ABS SRS and/or instrument failure.. Fix: On affected vehicles check threaded connection and where necessary replace fuse box. | 1 |
| May 2016 | Rear bench SEAT may lift up from the rear in a collision & attached SEAT belts may not be anchored correctlyFault: On 'B' Class models fitted with 'Easy Vario' rear seat option a bolt securing the seat bench to the body may have been omitted during production. This may allow the seat bench to lift during a frontal collision. Seat belt effectiveness may also be compromised. Fix: On affected vehicles check for presence and tightness of retaining screws. Fit new screws where necessary and tighten all screws to specification. | 146 |
| Jan 2016 | Risk of fireFault: The high pressure fuel lines have not been manufactured to the correct specification which over time can lead to crack formation and fuel leaking. Fuel escaping in the presence of an ignition source could lead to fire. Fix: Recall the vehicles that are likely to be affected and replace the high pressure fuel lines. | 1,327 |
| Dec 2015 | Vehicle may cut outFault: In rare cases the propulsion control unit may send an incorrect message. This may cause the electric power train to shut down. Power can be restored by the normal start sequence. Fix: Update software on affected vehicles. | 243 |
| Nov 2015 | Engine may failFault: The camshaft could break and damage the engine due to it not being manufactured to the correct specification. If the condition occurs it will lead to a sudden loss of drive thereby increasing the risk of a collision. Fix: Recall the vehicles that are likely to be affected and replace the exhaust camshaft. | 395 |
| Aug 2015 | Front passenger airbag may not deployFault: Certain fuses in the passenger's footwell may not have been fitted correctly. This may adversely affect the instrument cluster windscreen wipers and the passenger seat occupancy recognition system. In certain conditions this may cause the passenger's air bag not to deploy in an accident. Fix: On affected vehicles check fuses and if necessary replace fuse box. | 1,028 |
| Jul 2015 | Possibility of loss of driveFault: The drive shaft and the hub of the outer joint may separate. In very rare cases it cannot be excluded that the vehicle stops. The steering and braking system remain fully available to the driver. Fix: Recall the vehicles that are likely to be affected to replace the snap ring both sides together with the respective outboard boots on the affected vehicles. | 3,890 |
| Jan 2015 | Oil may leakFault: On certain diesel engines the 'O' ring may not have been produced to the correct specification. This may allow oil to leak and contaminate the environment. If excessive oil is lost engine damage may occur. Fix: On affected vehicles replace the chain tensioner sealing ring. | 61,672 |
| Jul 2013 | Rear back-rest may failFault: It is possible that vehicles fitted with the Easy Vario seat system may have a seat back-rest lock that is not to specification. This could in the event of extreme loading (a rear end collision) result in the lock failing and the seat back-rest folding forward possibly causing injury to the occupant. Fix: Recall all affected vehicles to check and if required replace the rear back-rest lock. | 100 |
| May 2012 | Transmission may not operate correctlyFault: A frictional connection (clutch within the gearbox) may go out of tolerance and produce a chattering noise. This will be followed by a warning message appearing in the instrument cluster and symptoms similar to a slipping clutch. Fix: Recall the vehicles that are likely to be affected to check the thrust link belt of the continuously variable transmission. Where necessary the transmission will be replaced. | 51 |
| Sep 2010 | Fuel may leakFault: It is possible on some fuel tanks that the vent pipe is not to specification. This can lead to a small leak into the charcoal canister and if not rectified can over a period of time result in a fuel leak. Fix: Recall the affected vehicles and replace the fuel tank. | 147 |
| Oct 2008 | Seat belt buckle could detach.Fault: Seat belt locking pawls may break in the event of an accident which in the most unfavourable circumstances may lead to the seat belt buckle detaching Fix: Recall the vehicles that are likely to be affected to check the seat belt batch number and replace the seat belt where necessary. | 194 |
Nothing matches that search on this page.
Vehicles affected is the number DVSA lists for each recall.
How to check a car for recalls
A recall only applies to vehicles built within set dates or VIN ranges, so a recall listed for a model does not mean every car of that model is affected. To check a particular car, enter its registration in our free reg lookup, which shows whether DVSA records an outstanding recall. You can then confirm on GOV.UK's check vehicle recalls service.
A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
Buying used? A free check does not cover outstanding finance, write-off or stolen records. For those, use our vehicle history check, with data provided by Experian.
Frequently asked questions
How do I check if my B Class has an outstanding recall?
Enter the registration in the free MotifyMe reg lookup. It shows whether DVSA records an outstanding recall for that vehicle. You can then confirm the details on GOV.UK's check vehicle recalls service.
How many recalls has the Mercedes-Benz B Class had?
DVSA's recalls data lists 47 safety recalls covering the Mercedes-Benz B Class, the most recent dated 6 May 2024. A recall only applies to vehicles built within set dates or VIN ranges, so check the registration with our free reg lookup to see whether a car has an outstanding recall, then confirm on GOV.UK.
Does a recall mean a car is unreliable?
No. A recall count is not a reliability score. Recalls are how manufacturers put faults right, and models sold in large numbers over many years tend to appear more often.
What should I do if my car is affected by a recall?
Contact a dealer for that make or the manufacturer and quote the recall number. Each recall listing explains the fault and the fix the manufacturer has set out.
Where does this recall data come from?
From DVSA's vehicle recalls data, published under the Open Government Licence v3.0. MotifyMe refreshes these pages from the latest DVSA file each month. These pages were last updated on 22 November 2026.
Recalls are matched to models by the model names in DVSA's file, so a recall listed under a different name may not appear here. Always check the individual vehicle.
Contains public sector information licensed under the Open Government Licence v3.0. Source: DVSA vehicle recalls data.
Last updated 22 November 2026. These pages are refreshed from the latest DVSA file each month.
Send a UK registration to +44 7537 185888 and we reply in the chat with a free vehicle check.
What it can do
- ✓Free vehicle check: send any UK reg for the make, model, MOT and tax status, plus any outstanding safety recall
- ✓Snap a number plate: send a photo and we read the reg for you, then ask you to confirm it
- ✓Free valuation: add the mileage after the reg, for example AB12 CDE 45k. A guide only, not an offer to buy or a guarantee of sale price See terms
- ✓Paid vehicle history check, with data provided by Experian, delivered in the chat
- ✓Free MOT and tax reminders: reply REMIND with a reg (typos are fine)
- ✓Recalls: send RECALLS and a make or model, for example RECALLS Ford Puma
- ✓MOT pass rates: send MOT RATE and a model, for example MOT RATE Ford Fiesta
- ✓How many are left: send HOW MANY and a model no longer sold new, for example HOW MANY Saab 9-3
- ✓Find a vehicle: tell us what you want, for example Ford Fiesta under 8k
- ✓Ask about a vehicle: send its MotifyMe link or reg with your question, or after a search reply ASK, the number and your question, for example ASK 2 is it still available
- ✓Fuel prices: live prices, plus a journey fuel cost such as London to Edinburgh
- ✓Fuel price alerts by email: send FUEL ALERT with your town or postcode, fuel and email address
- ✓Diesel driver? Send FUEL CARD for the Accelerate diesel fuel card, up to 5p a litre
- ✓Reply STOP at any time to opt out
Looking for a Mercedes-Benz B Class?
See used Mercedes-Benz B Class cars listed on the MotifyMe® marketplace.
See B Class cars for sale